A sample collector for robotic sample return missions II: Radiation tests

Sample return from small solar system objects is playing an increasingly important part in solar system exploration. Critical to such missions is a robust, simple, and economic sample collector. We have developed a collector such as this for near-Earth asteroid sample return missions that we have termed the Touch-and-Go Impregnable Pad (TGIP). The collector utilizes a silicone substrate that is pushed into the dust and gravel surface layer of the asteroid. As part of a systematic evaluation of the TGIP, we have investigated the resilience of this substrate to ionizing radiations. Several miniature versions of the collector, containing typically ∼3 g of the collection substrate, were exposed to 0.564 MeV beta particles from a ⁹⁰Sr source and a 6 MeV electron beam in a linear accelerator to simulate the wide range of energies of solar and galactic ionizing radiation. Various radiation levels up to eight times greater than expected on a six-year asteroid mission (in the case of beta radiation) and 50 times greater than expected (in the case of the 6 MeV electron radiation) were administered to the substrate. After irradiation, the efficiency of the substrate in collecting samples of mock regolith was compared with that of collectors that had not been irradiated. No difference beyond experimental uncertainty was observed and we suggest that the operational TGIP will not be affected adversely by radiation doses expected during a typical six-year inner solar system mission.     

Experimental results for Titan aerobot thermo-mechanical subsystem development

This paper describes experimental results from a development program focused on maturing Titan aerobot technology in the areas of mechanical and thermal subsystems. Results from four key activities are described: first, a cryogenic balloon materials development program involving coupon and cylinder tests and culminating in the fabrication and testing of an inflated 4.6 m long prototype blimp at 93 K; second, a combined lab experiment and numerical simulation effort to assess potential problems resulting from radioisotope power source waste heat generation near an inflated blimp; third, an aerial deployment and inflation development program consisting of laboratory and helicopter drop tests on a near full scale (11 m long) prototype blimp; and fourth, a proof of concept experiment demonstrating the viability of using a mechanically steerable high gain antenna on a floating blimp to perform direct to Earth telecommunications from Titan. The paper provides details on all of these successful activities and discusses their impact on the overall effort to produce mature systems technology for future Titan aerobot missions.     

A methodology to support strategic decisions in future human space exploration: From scenario definition to building blocks assessment

The human exploration of multiple deep space destinations (e.g. Cis-Lunar, NEAs), in view of the final challenge of sending astronauts to Mars, represents a current and consistent study domain especially in terms of its possible scenarios and mission architectures assessments, as proved by the numerous on-going activities about this topic and moreover by the global exploration roadmap. After exploring and analysing different possible solutions to identify the most flexible path, a detailed characterisation of several Design Reference Missions (DRMs) represents a necessity in order to evaluate the feasibility and affordability of deep space exploration missions, specifically in terms of enabling technological capabilities.The study presented in this paper was aimed at defining an evolutionary scenario for deep space exploration in the next 30 years with the final goal of sending astronauts on the surface of Mars by the end of 2030 decade. Different destinations were considered as targets to build the human exploration scenario, with particular attention to Earth–Moon Lagrangian points, NEA and Moon. For all the destinations selected as part of the exploration scenario, the assessment and characterisation of the relative Design Reference Missions were performed. Specifically they were defined in terms of strategies, architectures and mission elements. All the analyses were based on a pure technical approach with the objective of evaluating the feasibility of a long term strategy for capabilities achievement and technological development to enable future space exploration.This paper describes the process that was followed within the study, focusing on the adopted methodology, and reports the major obtained results, in terms of scenario and mission analysis.     

RPC-IES: The Ion and Electron Sensor of the Rosetta Plasma Consortium

The ion and electron sensor (IES) is part of the Rosetta Plasma Consortium (RPC). The IES consists of two electrostatic plasma analyzers, one each for ions and electrons, which share a common entrance aperture. Each analyzer covers an energy/charge range from 1 eV/e to 22 keV/e with a resolution of 4%. Electrostatic deflection is used at the entrance aperture to achieve a field of view of 90°× 360° (2.8π sr). Angular resolution is 5°× 22.5° for electrons and 5°× 45° for ions with the sector containing the solar wind being further segmented to 5°× 5°. The three-dimensional plasma distributions obtained by IES will be used to investigate the interaction of the solar wind with asteroids Steins and Lutetia and the coma and nucleus of comet 67P/Churyumov–Gerasimenko (CG). In addition, photoelectron spectra obtained at these bodies will help determine their composition.     

2020中美阿火星探测任务分析

2020年为火星探测大年,各国相继赶在发射窗口发射自己的火星探测器,截止目前成功赶上发射窗口的国家,按时间先后分别为阿联酋、中国和美国。本文给出了2020年火星探测发射和到达窗口的“猪排”能量图,在有效载荷、发射窗口、运载火箭、地火转移轨道、火星俘获及着陆、通信等方面,对三个国家发射的探测器进行了对比分析,并给出此次火星探测各环节的相关参数。     

基于微分进化算法的深空小推力轨道优化设计

针对多目标多任务的深空探测轨道优化设计问题,基于以太阳为主引力体的二体模型,采用电推进小推力系统,提出了将目标行星的探测方式、探测顺序、发射窗口同时进行全局优化的解决方案.依此建立小推力轨道优化设计算法模型,利用微分进化算法进行全局一体化优化设计,得出多目标多任务的一体化深空探测轨道.通过与相同条件下其他设计方法的结果比对分析得出：基于小推力推进方式并采用微分进化算法进行优化的轨道优化设计方案,在多目标多任务深空轨道一体化设计问题上具有可行性及应用价值.     

深空探测用低温推进剂贮箱热力排气系统研究

Cryogenic propellant usually experiences long term on orbit storage. The pressure increase in cryogenic storage tank is faced by most of space missions. The thermodynamic vent system (TVS) is treated as the promising method to control the increase of the tank pressure by scholars both at home and abroad. Based on the investigation conducted by different research agencies, literature review and management are conducted to reflect the recent research statue on TVS. The development profile of the experimental research on the pressure control performance of TVS is specially summarized. The condition setting and performance difference of TVS conducted by different agencies are compared and analyzed. The key technique and related conclusion are refined during the operation of TVS. Finally, based on the requirement of the large scale using of cryogenic propellant in deep space exploration in China, the development plan is proposed on the aspect of TVS pressure control on cryogenic storage tanks.     

基于权衡空间探索的多约束弹道初值确定方法

运载火箭弹道设计对初值的选取敏感,需要设计人员具备相应经验,新构型或新任务下迭代设计易发散,设计过程依靠人员手动调整,效率较低。应用权衡空间探索及全局优化思想,给出了多约束弹道设计初值确定方法,并在此基础上重新建立了弹道设计流程,自动完成初值选取及精确设计,降低了设计过程对人员经验的依赖性,提升了弹道设计方法的智能化程度,提高了论证及设计效率。     

Application of WorldView-3 imagery and ASTER TIR data to map alteration minerals associated with the Rodalquilar gold deposits,southeast Spain

The Rodalquilar epithermal quartz-alunite gold deposits that occur within the Rodalquilar caldera complex in southeast Spain, are associated with a pronounced hydrothermal alteration of the country rocks. The hydrothermal alteration zones that are exposed on the surface consist of the vuggy silica zone, the advanced argillic alteration zone, the intermediate argillic alteration zone, the propylitic alteration zone, and a second stage supergene acid sulfate alteration. High spatial resolution multispectral imagery recorded by the WorldView-3 satellite was used in this study to map the spatial distribution of the main alteration minerals in the Rodalquilar caldera complex. Thermal infrared (TIR) data of the ASTER satellite were used to detect the quartz-rich zones. The analysis of the Rodalquilar WorldView-3 data was based on the Adaptive Coherence Estimator (ACE), a partial unmixing algorithm. The ACE processing accurately mapped the spatial distribution of alunite, kaolinite, illite and goethite. Alunite is abundant in the vuggy silica and advanced argillic alteration zones, and in the second stage supergene acid sulfate alteration. Kaolinite is predominant in the intermediate argillic alteration zone. Illite is abundant in the outer parts of the intermediate argillic alteration zone. Goethite image maps gossans that mainly occur in the vuggy silica and advanced argillic alteration zones, and in the areas characterized by the second stage supergene acid sulfate alteration. The detection of quartz-rich zones from the ASTER TIR data complemented the WorldView-3 mapping results. The study shows the efficiency of high spatial resolution multispectral remote sensing imagery recorded by the WorldView-3 satellite for district-level mineral exploration studies.     

Extrasolar space exploration by a solar sail accelerated via thermal desorption of coating

For extrasolar space exploration it might be very convenient to take advantage of space environmental effects such as solar radiation heating to accelerate a solar sail coated by materials that undergo thermal desorption at a particular temperature. Thermal desorption can provide additional thrust as heating liberates atoms, embedded on the surface of the solar sail. We are considering orbital dynamics of a solar sail coated with materials that undergo thermal desorption at a specific temperature, as a result of heating by solar radiation at a particular heliocentric distance, and focus on two scenarios that only differ in the way the sail approaches the Sun. For each scenario once the perihelion is reached, the sail coat undergoes thermal desorption. When the desorption process ends, the sail then escapes the Solar System having the conventional acceleration due to solar radiation pressure. We study the dependence of a cruise speed of a solar sail on perihelion of the orbit where the solar sail is deployed. The following scenarios are considered and analyzed: (1) Hohmann transfer plus thermal desorption. In this scenario the sail would be carried as a payload to the perihelion with a conventional propulsion system by a Hohmann transfer from Earth’s orbit to an orbit very close to the Sun and then be deployed. Our calculations show that the cruise speed of the solar sail varies from 173?km/s to 325?km/s that corresponds to perihelion 0.3?AU and 0.1 AU, respectively. (2) Elliptical transfer plus Slingshot plus thermal desorption. In this scenario the transfer occurs from Earth’s orbit to Jupiter’s orbit; then a Jupiter’s fly-by leads to the orbit close to the Sun, where the sail is deployed and thermal desorption comes active. In this case the cruise speed of the solar sail varies from 187?km/s to 331?km/s depending on the perihelion of the orbit. Our study analyses and compares the different scenarios in which thermal desorption comes beside traditional propulsion systems for extrasolar space exploration.