珠海一号高光谱卫星辐射精度真实性检验研究

“珠海一号（OHS）”高光谱商业遥感卫星数据在国民经济建设中发挥着越来越重要的作用。当前，针对商业遥感卫星数据质量精度的验证和评价研究成果较少。本文基于地面实测数据，对OHS卫星高光谱数据的辐射精度进行了真实性检验和定量分析。结果表明：OHS卫星表观辐亮度与实测结果具有较好的线性相关关系，相关系数R²大于0.7。与实测结果相比，OHS卫星各通道表观辐亮度值整体偏低，但两者光谱曲线形态基本一致。随着时间的推移，OHS传感器性能可能存在衰减，不同通道的衰减程度不一；在31个通道中，与实测值之间的相对差异在20%以内的通道数为9个；在20%~30%之间为14个，30%~40%为8个。     

六西格玛在军用飞机发动机总装质量控制中的应用

国内某军用飞机主机厂C 发动机装机后存在间隙尺寸超差、装机一次合格率低的问题，为了解决该问题，引入六西格玛质量管理模式的DMAIC 方法对发动机装机流程进行研究。运用多元回归分析、机理分析等确定影响间隙尺寸的关键因子及其影响程度，采用线性拟合得出关键因子最优参数范围，并制定详细控制计划。通过对控制图进行分析，发现改善后的间隙尺寸处于工序稳定状态，发动机装机一次合格率由改善前的65.2% 提升至95%，表明基于六西格玛DMAIC 方法的质量控制对减小生产流程变异，提高生产效率有积极作用。     

原子钟性能对卫星导航系统定位精度的影响分析

星载原子钟是卫星导航系统的关键设备,原子钟主要通过影响卫星钟差对定位精度产生影响,分析了GNSS星载原子钟性能对定位精度的影响.通过原理分析,建立了原子钟稳定度与卫星导航系统定位精度的关系.在不考虑控制段对星钟校准误差的前提下,将原子钟噪声与星上工作环境因素作为主要因素,分析了GPS-IIF铷钟和铯钟对钟差/定位误差的影响,并给出了分析结果.最后,利用iGMAS提供的钟差产品数据,对比了北斗和GPS部分原子钟的稳定度及其对定位精度的影响,为后续星载原子钟的发展与选择提供了一定参考.     

A policy iteration method for improving robot assembly trajectory efficiency

Bolt assembly by robots is a vital and difficult task for replacing astronauts in extra-vehicular activities (EVA), but the trajectory efficiency still needs to be improved during the wrench insertion into hex hole of bolt. In this paper, a policy iteration method based on reinforcement learning (RL) is proposed, by which the problem of trajectory efficiency improvement is constructed as an issue of RL-based objective optimization. Firstly, the projection relation between raw data and state-action space is established, and then a policy iteration initialization method is designed based on the projection to provide the initialization policy for iteration. Policy iteration based on the protective policy is applied to continuously evaluating and optimizing the action-value function of all state-action pairs till the convergence is obtained. To verify the feasibility and effectiveness of the proposed method, a noncontact demonstration experiment with human supervision is performed. Experimental results show that the initialization policy and the generated policy can be obtained by the policy iteration method in a limited number of demonstrations. A comparison between the experiments with two different assembly tolerances shows that the convergent generated policy possesses higher trajectory efficiency than the conservative one. In addition, this method can ensure safety during the training process and improve utilization efficiency of demonstration data.     

Adaptive cubature Kalman filter with the estimation of correlation between multiplicative noise and additive measurement noise

Mobile robots are often subject to multiplicative noise in the target tracking tasks, where the multiplicative measurement noise is correlated with additive measurement noise. In this paper,first, a correlation multiplicative measurement noise model is established. It is able to more accurately represent the measurement error caused by the distance sensor dependence state. Then, the estimated performance mismatch problem of Cubature Kalman Filter(CKF) under multiplicative noise is analyzed. An i...     

加工装配误差影响下偏转射流压力伺服阀静态特性分析

电液压力伺服阀是电液压力伺服控制系统的核心控制元件，广泛应用于航空、航天、军事等领域。区别于流量伺服阀，压力伺服阀在滑阀放大器的设计上多采用带有压力控制容腔的三通阀结构，不同的滑阀结构使得现有的偏转射流流量伺服阀仿真模型难以满足压力伺服阀性能预测的需求。本文基于AMESim平台建立了偏转射流压力伺服阀的仿真模型，并通过实验对仿真模型进行了验证，验证结果表明仿真模型能够准确地描述压力伺服阀的静态特性。最后，通过仿真模型分析了加工装配误差影响下压力伺服阀输出性能差异，仿真结果可为偏转射流压力伺服阀的性能预测和结构设计提供参考。     

不同尺度范围的监测网对星基增强服务性能的影响分析

区域监测站提供的星基增强完好性监测服务在民用航空等生命安全领域发挥着重要作用。为了分析利用不同尺度监测网估计的完好性信息对用户服务性能影响,使用等效钟差方法分别实现三种不同尺度的监测网完好性参数估计,并进行增强定位验证。从增强卫星数目、用户测距误差、定位精度和保护级包络特性方面研究不同尺度的监测网对用户服务性能评估的影响,结果表明:与小尺度和中等尺度区域相比,大尺度区域增强卫星数目分别增加了50.7%、33.7%。与广播星历伪距单点定位相比,基于小、中等和大尺度区域监测网估计的改正数增强定位在水平方向定位精度分别提升了33.08%、33.59%和32.54%,垂直方向定位精度分别提升了36.56%、41.07%和43.86%。三种尺度估计的平均用户测距误差均优于0.3 m,保护级水平对定位误差的包络均能达到95%。研究成果可为区域星基增强监测网的选择提供理论支撑和应用依据。