高效液力偶合器轮系参数分析研究

高效液力偶合器额定工况无滑差的特点，使大功率（＞ ３００ ｋ Ｗ ）液力偶合器发热问题得到根本解决。就其设计方法进行分析，提出了斗轮及斗叶数的确定方法，并通过样机试验了解该偶合器的特性。     

易燃毒性气体检测电路设计

从TGS813气敏传感器灵敏度特性出发，给出了采用该传感器检测易燃毒性气体，消除传感器离散性、非线性影响的检测电路设计方法。     

HIGH SPEED FLOW DESIGN USING THE THEORY OF OSCULATING CONES AND AXISYMMETRIC FLOWS

Ｃｏｎｆｉｇｕｒａｔｉｏｎａｅｒｏｄｙｎａｍｉｃｄｅｓｉｇｎｃｏｎｃｅｐｔｓａｒｅａｉｍｅｄａｔｔｈｅｄｅｆｉｎｉｔｉｏｎｏｆｆｉｎｄｉｎｇａｉｒｆｒａｍｅａｎｄｐｒｏｐｕｌｓｉｏｎｃｏｍｐｏｎｅｎｔｇｅｏｍｅｔｒｉｅｓｗｉｔｈａｃｏｎｔｒｏｌｅｄｆ...     

双级高压涡轮气动性能试验状态模化方法

针对双级高压气冷涡轮的低温试验状态模化方法，对以空气为工质、基于不同相似准则数的试验模化状态的流场相似 性进行数值仿真。结果表明：对于有冷气试验模化方法，采用出口马赫数与设计状态一致的模化方法可获得相似性较好的试验状 态流场，此时反力度、载荷系数、马赫数均能保证良好的相似性，主要相似准则数偏差不超过5%；对于无冷气试验模化方法，保持 涡轮几何不变并增大膨胀比使得等熵速比与设计状态的一致，或通过改变叶片数保证各排出口马赫数与设计状态的一致，均能显 著改善无冷气模化状态与设计状态的流场相似性。其中前者反力度相似性接近98%，而后者载荷系数和马赫数的相似性达到了 同样水平，但破坏了模型的几何相似。     

Minimizing energy utilization for growing strawberries during long-duration space habitation

Strawberry is a candidate crop for space that is rich in protective antioxidants and could also have psychological benefits as a component of crew diets during long-duration space habitation. Energy for electric lighting is a major input to a controlled-environment crop-production system for space habitation. Day-neutral strawberry cultivars were evaluated at several different photoperiods to determine minimum lighting requirements without limiting yield or negatively impacting fruit quality. The cultivars ‘Tribute’, ‘Seascape’, and ‘Fern’ were grown at 14, 17, or 20 h of light per day, and fruit yield was evaluated over a 31-week production period. This amounted to a difference of 2418 kWh m⁻² in energy usage between the longest and shortest photoperiods. All cultivars produced similar total fresh weight of fruit regardless of photoperiod. Volunteer tasters rated organoleptic characteristics including sweetness, tartness, texture, and overall appeal as measures of fruit quality. Generally, organoleptic attributes were not affected by photoperiod, but these attributes were somewhat dependent upon cultivar and harvest time. Cultivars under different photoperiods varied in their production of fruit over time. ‘Seascape’ was the most consistent producer, typically with the largest, most palatable fruit. ‘Seascape’ plants subsequently were grown at 10-, 12-, or 14-h photoperiods over a treatment period of 33 weeks. Photoperiod again had no significant effect on total fruit weight, although there were periodic flushes of productivity. Fruit under all photoperiods had acceptable approval ratings. A large-fruited, day-neutral strawberry cultivar such as ‘Seascape’ remains productive under shortened photoperiods, allowing reductions in energy and crew labor while maintaining flexibility for mixed-cropping scenarios in space.     

旋涡破裂对单独翼气动特性的影响及其工程估算方法

本文介绍了旋涡破裂对单独翼纵向和横向气动特性的影响,在分析和归纳实验数据的基础上,提出估算旋涡破裂对单独翼纵向和横向气动特性影响的工程方法。     

论超声速流动中的有益干扰

本文利用三维超声速流动线化理论的积分特性,推出了点源分布和单元旋涡分布的积分关系公式,并利用它们分析了翼下有体,翼上有体和翼的上、下各有一个体等型式的干扰特点,指出了几种可能的有益干扰型式。     

分叉尾喷管气动性能实验研究

某涡轴发动机尾喷管由环形转接段和双管急弯收扩段组成，其形状呈“裤衩”形。在模拟涡轮出口旋流的条件下进行了喷管模型内流气动试验，采用双向总压探针测量喷管内大回流区，发现从３３°截面开始的大分离区对喷管性能有重大影响。在给定流量条件下，通过该流量的喷管进出口压比Ｐ＊５／Ｐ６远比无分离的理论值要高。试验证明导流板是减少喷管气流分离、提高扩压比、降低进口总压的有效措施。Ｐ＊５／Ｐ６可降低１．７％左右。     

联接翼布局低速纵向气动特性研究

本文基于低速风洞纵向测力以及涡格法的理论计算结果，初步研究了联接翼布局的低速 向气动特性，并与相应的机翼、尾翼相分离的正常布局的试验结果作了比较。结果表明，联接翼布局具有许多优点，如较大的升力线斜率Ｃ、较大的最大升力系数Ｃｙｍａｘ、较大的纵向稳定度、相当小的诱导阻力Ｃｘｉ和较高的巡航或阻比Ｋ，以及具有直接升力和直接侧力控制的可能性。文章还表明在联接翼前部配置鸭翼对进一步提高和改善其纵向气动性能的可     

弱粘弹性材料结构振动系统的模态特点

 本文把弱粘弹性材料结构分为单模量和多模量情形,展开对其模态性能的讨论。本文指出了弱粘弹性材料结构的特征值是一组有理分式多项式方程的根,并给出了关于这些有理分式多项式方程根的一个定理。根据这一定理和弱粘弹性材料的动态性能特点,阐明了弱粘弹性材料结构的模态特点。