共形光学系统设计研究

共形光学整流罩在保证了光学指标的前提下,与后端的其他结构外形轮廓平滑连接,从而提高了飞行器空气动力学的性能,在航空航天领域具有重要的应用价值。然而,采用特殊面型的整流罩给共形光学系统的像差校正以及加工、检测方面带来了极大的挑战。本文首先分析了共形整流罩像差特性,并在此基础上介绍了两种典型的光学设计。     

气固两相透平叶片冲蚀特性的气动试验研究

在自行研制风洞中先后对应用较广的MCrAlY叶片涂层和2Cr12Mo-5叶片合金、钢丸表面强化试件在不同气流速度、颗粒冲角、颗粒性状、颗粒粒度的条件下进行了气动冲蚀试验。试验结果表明,无论是涂层还是合金,冲蚀率均随冲蚀颗粒的累积质量呈线性变化;由对比可知,其它条件相同的情况下,涂层在广泛的冲角范围内较合金的冲蚀率更小,表面的"烧结"特征,能减小叶片的冲蚀率;表面呈多棱的石英砂颗粒对试件的冲蚀程度强于带突圆球状的催化剂颗粒;在该试验范围内,相同材质的颗粒,粒度愈大,对试件的冲蚀率愈大;钢丸表面强化工艺兼有防冲蚀的能力。试验结果将为优化叶片选材、简化叶片维修技术、降低叶片维修成本提供有益的参考。     

小不对称物体配平性能风洞实验研究

用阶跃响应法,在风洞中测量小不对称物体配平性能的实验原理、实验装置、数据处理及部分实验结果。 模型支承于空气静压轴承。在模型内部设有电磁机构,在一次吹风中,可以阶跃方式多次提供不对称量。由高精度、非接触的感应同步器数字测量模型俯仰角变化历程。用修正Newton-Raphson法处理数据,求出小不对称量引起的配平角δ_o、俯仰力矩C_mo和气动刚度C_ma、气动阻尼C_mq等参数。 对11°斜切锥,钝度比分别为0.06及0.16的模型进行了风洞实验。实验M数为33.5和4。实验结果表明,所采用的实验原理、设备及方法可提供较好的精度及分辨率。实验还求出了配平性能(δ_o,C_mo)以及C_ma,C_mq随M数的变化。     

俯仰三角翼的流态及结构

本文对俯仰三角翼的流动特性进行了实验研究，给出了俯三角翼的截面流态特点，对三角翼俯仰 运动的流动机理进行了分析。     

微流星体高速撞击航天器Whipple防护结构损伤特性研究(英文)

采用金刚石模拟高脆性、高熔点微流星体材料,对航天器典型Whipple防护结构进行高速撞击试验.试验表明,撞击产生的高温高压效应导致金刚石部分或全部转化为石墨,金刚石对防护结构的损伤主要体现在中低速阶段,当撞击速度大于4.3km/s时,对后板的灼烧损伤极为显著。     

A novel approach for predicting inlet pressure of aircraft hydraulic pumps under transient conditions

Cavitation caused by insufficient suction is a major factor that influences the life of aircraft pumps. Currently, pressurizing the tank can solve the cavitation problem under steady large-flow conditions. However, this method is not always effective under transient conditions (from zero flow to full flow in a very short time). Moreover, to apply and design other measures, such as a boost impeller, the suction dynamics during the transient period must be investigated. In this paper, a novel approach based on the pressure wave propagation theory is proposed for predicting the inlet pressure of an aircraft pump under transient conditions. First, a dynamic model of a typical aircraft pump is established in the form of differential equations. Then, the transient flow model of the inlet line is described using momentum and continuity equations, and the governing equations are discretized by the method of characteristics and the finite difference method. The simulated results are in good agreement with the results from verification tests. Further simulation analysis indicates that the wave velocity and transient time may influence the inlet and reservoir pressure as well as the size of the inlet line. Finally, solutions for upgrading the inlet pressure are discussed. These solutions provide guidelines for designing inlet installations.     

Aerothermodynamic and stability analyses of a deployable re-entry capsule

Recent research projects, in the field of atmospheric re-entry technology, are focused on the design of deployable, umbrella-like Thermal Protection Systems (TPSs). These TPSs are made of flexible high temperature resistant fabrics, folded at launch and deployed in space for de-orbit and re-entry operations. In the present paper two possible sphere–cone configurations for the TPS have been investigated from an aerodynamic point of view. The analyzed configurations are characterized by the same reentry mass and maximum diameter, but have different half-cone angles (45° and 60°). The analyses involve both the evaluation of thermal and aerodynamic loads and the assessment of the capsule longitudinal stability. The aerothermodynamic analysis has been performed for the completely deployed heat shield in transitional and continuum regimes, while the longitudinal stability has been analyzed in free molecular, transitional and continuum regimes, also taking into consideration the heat shield deployment sequence at high altitudes.     

基于量子行为鸽群优化的无人机紧密编队控制

随着军事、民用需求的提高和相关领域的技术推动，无人机编队协同作业已成为当今人们逐渐关注的焦点。无人机紧密编队是指无人机间侧向距离在1~2倍翼展内的编队，因其可有效改善编队中无人机的气动性能而备受瞩目。基于无人机紧密编队条件下的气动耦合效应，建立三维空间下的状态空间方程描述双机相对运动，并推导了紧密编队条件下的双机最优编队构型，在此构型下将人工势场法和编队控制相结合作为控制系统中的间接控制环，并针对基本鸽群优化算法的寻优缺陷利用量子行为规则对其进行改进，将改进后的鸽群优化算法和无人机控制量结合作为控制系统中的直接控制环，最后通过仿真对比验证了此控制系统对于紧密编队控制的有效性。     

典型再入返回器气动特性对比与改进研究

返回器气动特性研究对宇宙飞船的研制起着先导和制约作用。文章对Apollo、CEV和类Soyuz这3种典型的轴对称钝头体再入返回器气动布局进行了气动特性的对比分析,发现与Apollo、CEV相比,类Soyuz外形的升阻比偏小,无法满足以第二宇宙速度载人空间再入返回的要求。在此基础上研究了几何参数（包括倒锥角和球冠半径）变化对类Soyuz外形返回器气动性能的影响规律,从中得到类Soyuz外形的改进方向,提出了一种以类Soyuz外形为基础的改进设计外形,并对该外形的升阻特性、稳定性和配平特性等相关气动特性进行了分析。研究表明通过对几何外形参数的调整优化来提高类Soyuz外形的升阻比,从而达到以第二宇宙速度再入返回的升阻比要求,这样的技术途径是可行的。     

某型蒸发式稳定器气动及燃烧特性研究

为解决亚燃冲压发动机在高速低温来流条件下的可靠点火、火焰稳定和高效燃烧问题,对某型蒸发式火焰稳定器分别进行了冷态流场和燃烧流场的数值研究,并与常规V型火焰稳定器进行了对比分析。研究结果表明:在给定范围内,蒸发式稳定器随来流速度的增大,总压恢复系数和停留时间明显减小,回流区长度、回流率和燃烧效率变化不大;与相同槽宽的常规V型火焰稳定器相比,回流率明显减小,总压恢复系数、回流区长度和停留时间略有减小。蒸发式稳定器后部形成明显的回流区,且基本上不受外部主流流动的干扰,通过单独控制稳定器局部供油,可以使稳定器在最佳油气比下工作,有利于在高速来流条件下可靠工作。