X射线脉冲星自主导航的光子到达时间转换

根据广义相对论的后牛顿近似时空理论, 在忽略太阳系天体自转和扁率的情况下, 详细推导出X射线脉冲星自主导航中, 光子到达观测航天器和太阳系质心的时间差值, 它是对现行公式的修正．导出了质心坐标时与航天器固有时的变换关系, 根据这一关系, 建议在脉冲星导航的工程设计中可以仿照GPS, 将航天器携带时钟作频率调整, 从而有利于工程计算.     

第21～24太阳周4类空间天气事件爆发特征统计分析

对第21～24太阳周不同等级的太阳X射线耀斑事件、太阳质子事件、地磁暴事件及高能电子增强事件的爆发频次特征进行统计,结果表明：太阳周耀斑爆发的总数量与该太阳周的黑子数峰值呈正比,耀斑总数、X级耀斑事件数与峰值的相关系数分别为0.974,0.997;太阳质子事件主要发生在峰年前后1～2年,约占总发生次数的80%,峰值通量大于10pfu （1 pfu=1 cm^-2·sr^-1·s^-1）的质子事件中,84%伴有耀斑爆发,并且主要伴随M或X级耀斑,少量伴随C级耀斑,峰值通量大于1000pfu的质子事件中,98%伴随M或X级耀斑,并且以X级耀斑为主;第21,22,23和24太阳周发生地磁暴最频繁的时间分别在1982,1991,2003年和2015年,分别滞后黑子数峰值时间3年、2年、2年和1年;72%的高能电子增强事件发生在太阳周下降期,24%的高能电子增强事件发生在太阳周上升期.     

无谐波软X射线单色仪设计

能量在0.1～1keV范围的软X射线辐射在空间科学任务中具有重要应用.飞行前的辐射定标试验及地面辐射定标系统采用传统单色仪分光时,由于波长的整数倍关系带来的高次谐波污染问题非常严重.高次谐波在光束中的占比严重影响了软X射线探测仪器的定标数据精度.本文探讨了无谐波单极衍射技术在产生具有高单色性能的软X射线光束中的应用,基于单极衍射光栅技术实现软X射线无谐波单色仪设计.软X射线无谐波单色仪应用于空间辐射定标系统时能够将高次谐波占比抑制到0.3%以下,满足空间软X射线科学仪器高精度辐射定标试验对高次谐波抑制的要求.     

采用铯束管荧光稳频技术的小型光抽运铯原子频率标准

对于小型光抽运铯原子频率标准来说,激光稳频参考源的稳定性决定了激光系统的频率稳定性,进而决定了整机的频率稳定度指标。激光稳频可以采用饱和吸收稳频和铯束管荧光稳频两种方案。经对比了采用这两种激光稳频方式的整机指标,取得了初步的结果:与采用饱和吸收稳频相比,采用铯束管荧光稳频后,整机的短期稳定度指标没有明显恶化,长期稳定度指标有了明显提升,3. 21E-14/100 000s,1. 13E-14/400 000s,未出现闪变平台,仍在继续测试中。结果显示,铯束管荧光稳频技术应用光抽运小型铯原子频率标准,具有提高整机长期稳定度指标和增强环境适应性的潜力。     

太阳X射线暴在地球大气中传输的Monte Carlo模拟

应用MonteCarlo方法对太阳X射线暴(1-8Å及0.5-4Å)与地球大气相互作用过程进行跟踪模拟,得到了X射线暴在电离层D层产生的电子产生率,并计算了由此产生的宇宙噪声吸收值。结果与作者在南极观测得到的X射线暴期间宇宙噪声吸收值符合较好.     

SiC纤维增强复合材料界面微观结构的Raman光谱研究

使用Ｒａｍａｎ显微技术（Ｒａｍａｎ ｍｉｃｒｏｓｃｏｐｙ）研究了ＳｉＣ纤维增强碳化硅、ＪＧ６玻璃和Ｐｙｅｒｘ玻璃复合材料界面的微观结构。研究表明,复合材料的制备过程使纤维内自由碳颗粒的大小增大,尤其是在界面层两种玻璃复合材料制造过程使原纤维富含ＳｉＯ２的表面层消失,而且发生了界面层碳结构的有序化。     

Sun CubE OnE: A multi-wavelength synoptic solar micro satellite

The Sun cubE onE (SEE) is a 12U CubeSat mission proposed for a phase A/B study to the Italian Space Agency that will investigate Gamma and X-ray fluxes and ultraviolet (UV) solar emission to support studies in Sun-Earth interaction and Space Weather from LEO. More in detail, SEE’s primary goals are to measure the flares emission from soft-X to Gamma ray energy range and to monitor the solar activity in the Fraunhofer Mg II doublet at 280 nm, taking advantage of a full disk imager payload. The Gamma and X-ray fluxes will be studied with unprecedented temporal resolution and with a multi-wavelength approach thanks to the combined use of silicon photodiode and silicon photomultiplier (SiPM) -based detectors. The flare spectrum will be explored from the keV to the MeV range of energies by the same payload, and with a cadence up to 10 kHz and with single-photon detection capabilities to unveil the sources of the solar flares. The energy range covers the same bands used by GOES satellites, which are the standard bands for flare magnitude definition. At the same time SiPM detectors combined with scintillators allow to cover the non-thermal bremsstrahlung emission in the gamma energy range. Given its UV imaging capabilities, SEE will be a key space asset to support detailed studies on solar activity, especially in relation to ultraviolet radiation which strongly interacts with the upper layers of the Earth’s atmosphere, and in relation to space safety, included in the field of human space exploration. The main goal for the UV payload is to study the evolution of the solar UV emission in the Mg II band at two different time scales: yearly variations along the solar cycle and transient variations during flare events. The Mg II index is commonly used as a proxy of the solar activity in the Sun-as-a-star paradigm, in which solar irradiance variations in the UV correlate with the variations in stratospheric ozone concentrations and other physical parameters of the Earth high atmosphere. SEE data will be used together with space and ground-based observatories that provide Solar data (e.g. Solar Orbiter, IRIS, GONG, TSST), high energy particle fluxes (e.g. GOES, MAXI, CSES) and geomagnetic data in a multi-instrument/multi-wavelength/multi-messenger approach.     

Study of UV Ne II line shapes in the cathode sheath of an abnormal glow discharge

We report results of an experimental and theoretical study of complex UV line shapes of Ne II 369.421 nm, Ne II 370.962 nm, Ne II 371.308 nm, and.Ne II 372.711 nm lines in the cathode sheath (CS) region of an abnormal DC glow discharge in pure neon. Two sets of experimental profiles and electric field distributions, one for discharge with tungsten and the other with titanium cathode, were obtained by means of the optical emission spectroscopy (OES) and theoretically studied by the iterative CS kinetic model. It is shown that our theoretical model enables the determination of the most important CS parameters (e.g. the thickness of the CS region, and the theoretical distributions of electric field and gas temperature) and thereupon based accurate theoretical predictions of the experimentally observed profiles of the studied lines.     

芯片级光钟技术综述

芯片级光钟是一种基于热原子中光频跃迁的新型光钟,近年来随着光子集成技术、激光技术和微机电技术的发展,该类光钟可以实现较小的体积和较高的精度,有望广泛应用于对体积、质量、功耗和精度敏感的各种国防装备中.介绍了国内外芯片级光钟技术的进展情况,阐述了芯片级光钟的相关技术,包括基于双光子跃迁的光频标技术、微制造气室技术和微腔光频梳技术等,分析了影响频率稳定度和准确度的主要因素,最后对芯片级光钟面临的机遇和挑战进行了简要的展望.