搅拌流内大振幅界面波特性研究

针对竖直管内不同工况下气液两相搅拌流内的大振幅界面波特征参数(波形、波幅、波长和频率等)及运动特性进行了实验研究,系统分析了流动参数对大振幅界面波特征参数及运动特性的影响规律。结果表明:由于重力和气流剪切力在大振幅界面波不同运动阶段的影响程度不同,大振幅界面波在运动过程中存在与气流先逆向后同向的运动特点,证明了液泛现象普遍存在于搅拌流内,揭示了造成搅拌流液膜振荡剧烈的原因;搅拌流内,大振幅界面波波形符合正态分布函数特征,且波幅较环状流内扰动波波幅大,但是波幅和波长变化趋势与环状流内扰动波变化趋势相似,即波幅和波长随着气速的增大而减小,随液量的增大而增大,且当气速较小时,临界波幅随着液量的增加逐渐趋于定值;而大振幅界面波平均产生频率随气速和液速的增大而增大。     

二级轻气炮弹丸速度、质量和位置测量

二级轻气炮发射的氘冰弹丸的速度、质量和显示弹丸完整性的方法和所使用的仪器以及新开发的以波长编码、用光纤为传感器的弹丸进入位置的测量方法。     

Analytical Calculation Model for Mach Wave Parameters

When a wave shaper is embedded in a liner,Mach wave will emerge above the liner,which affects the head shape of an explosively formed projectile.Mach wave parameters,including radius and pressure need to be determined to effectively match Mach wave with the liner,so that a good head shape can be obtained.An analytical calculation model for Mach wave parameter is presented based on three-shock theory,and the theoretical values agree well with the experimental ones.The analysis shows that when the radius of the wave shaper is constant,the radius of the Mach wave increases,whereas the pressure decreases while increasing the distance between the liner and the wave shaper.When the distance between the liner and the wave shaper is constant,the radius of the Mach wave increases,whereas the pressure decreases when decreasing the radius of the wave shaper.     

无参考主动Lamb波结构损伤时反成像监测方法

主动Lamb波损伤监测中的差信号方法获取损伤散射信号容易受到结构和环境等外界因素的影响。针对该问题,提出了无参考信号的损伤成像定位和监测方法;研究了回波式压电阵列的布置方法,并设计采用时间反转窗函数,清除Lamb波监测信号中的直接传播信息和边界反射信号,以截取出内部散射信号;通过控制压电阵列布局、设置窗函数等技术条件,基于时间反转理论中对波源的自适应聚焦原理,直接利用当前状态下的传感信号实现对结构损伤的实时成像、定位与评估,不再需要健康信号作为参考。在玻璃纤维复合材料板上的实验结果表明,该方法能较为准确地实时监测出损伤的位置、范围等特征。     

GRECO建模在VC++4.0中的实现机制

GRECO(Graphical Electromagnetic Computing)技术是目前分析高频区复杂目标雷达散射截面(RCS)最有效方法之一.对复杂目标而言,应用GRECO方法的一个重要工作就是对目标的几何造型进行准确地建模,才能获得令人满意的结果.文中结合C-R样条建模理论,阐述了在Windows NT环境下利用VC+ +4.0与OpenGL为GRECO方法进行建模的机制.以标准体与复杂目标为实例,给出了与实验结果符合良好的RCS曲线,具有工程实用价值.      

高速列车进入带缓冲结构隧道的压力变化研究(Ⅰ)

给出了列车穿越带有缓冲结构的隧道压力变化的三维粘性流场数值模拟过程,控制方程为三维粘性、可压缩、非定常流的N-S方程,空间离散采用了中心有限体积法格式,时间采用预处理二阶精度多步后差分格式进行离散,对列车与隧道之间的相对运动采用移动网格技术处理。对不同的缓冲结构缓解隧道内瞬变压力及压力梯度的作用进行了研究。研究结果表明,缓冲结构的设置能够有效地降低隧道内的压力和压力梯度的最大值,其原因在于缓冲结构延长了压缩波压力上升的时间,降低列车突入隧道时所形成的最大压力梯度;另一方面由于压缩波在缓冲结构和列车、隧道之间多次的反射,也降低了压力峰值。     

Experimental investigation of shock-buffet criteria on a pitching airfoil

An experimental investigation of the shock-buffet phenomenon subject to unsteady pitching supercritical airfoil around its quarter chord has been conducted in a transonic wind tunnel. The model was equipped with pressure taps connected to the fast response pressuretransducers. Measurements were conducted at different free-stream Mach number from 0.61 to0.76. The principle goal of this investigation was to experimentally discuss the shock-buffet criterion over a SC(2)-0410 supercritical pitching ...     

Effect of blade tip winglet on the performance of a highly loaded transonic compressor rotor

The tip leakage flow has an important influence on the performance of transonic com-pressor. Blade tip winglet has been proved to be an effective method to control the tip leakage flow in compressor, while the physical mechanisms of blade tip winglet have been poorly understood. A numerical study for a highly loaded transonic compressor rotor has been conducted to understand the effect of varying the location of blade tip winglet on the performance of the rotor. Two kinds of tip winglet were designed and investigated. The effects of blade tip winglet on the compressor over-all performance, stability and tip flow structure were presented and discussed. It is found that the interaction of the tip winglet with the flow in the tip region is different when the winglet is located at suction-side or pressure-side of the blade tip. Results indicate that the suction-side winglet (SW) is ineffective to improve the performance of compressor rotor. In addition, a significant stall range extension equivalent to 33.74% with a very small penalty in efficiency can be obtained by the pressure-side winglet (PW). An attempt has been made to explain the fundamental mechanisms of blade tip winglet in detail.     

A参量在高频阻抗测量中的应用

根据微波网络理论提出了利用A参量求解高频阻抗的新方法,并将其应用于网络分析仪系统,对短波阻抗进行了测量。实践证明,该方法与传统的利用S参量的方法(利用反射系数)相比大大地拓宽了阻抗测量范围,在通用仪器上获得了比专用仪器高的测量精度,同时还解决了网络分析仪与非同轴网络的连接问题。     

平板上钝缘舵在超声速绕流中的三维分离特性研究

对于平板上的直立钝缘舵在M_∞=1.79、2.04和2.50的条件下,研究了该平板干扰区中的三维分离特性。着重讨论了钝缘直径、舵面迎角和来流马赫数对主分离线位置和形状的影响。分析了该类三维分离在性态上更强地依赖于无粘流动特性。此外,还对分离区内的二次分离发展过程和形态进行了初步讨论。