A novel approach for predicting inlet pressure of aircraft hydraulic pumps under transient conditions

Cavitation caused by insufficient suction is a major factor that influences the life of aircraft pumps. Currently, pressurizing the tank can solve the cavitation problem under steady large-flow conditions. However, this method is not always effective under transient conditions (from zero flow to full flow in a very short time). Moreover, to apply and design other measures, such as a boost impeller, the suction dynamics during the transient period must be investigated. In this paper, a novel approach based on the pressure wave propagation theory is proposed for predicting the inlet pressure of an aircraft pump under transient conditions. First, a dynamic model of a typical aircraft pump is established in the form of differential equations. Then, the transient flow model of the inlet line is described using momentum and continuity equations, and the governing equations are discretized by the method of characteristics and the finite difference method. The simulated results are in good agreement with the results from verification tests. Further simulation analysis indicates that the wave velocity and transient time may influence the inlet and reservoir pressure as well as the size of the inlet line. Finally, solutions for upgrading the inlet pressure are discussed. These solutions provide guidelines for designing inlet installations.     

多功能信号发生器的设计与制作

仪器由AT89C55单片机进行控制,通过键盘、LCD显示模块进行人机对话,完成波形选择、频段选择,频率、幅度输出控制。由MAX038产生正弦波、方波、三角波,其波形选择由单片机进行控制;频段选择由五档组成,可通过旋扭开关完成;频率由单片机输出数据经D/A转换后控制MAX038;幅度由单片机输出数据经D/A转换后改变放大器负反馈深度来实现输出信号幅度的变化。     

Identification of seismic activity sources on the subsatellite track by ionospheric plasma disturbances detected with the Sich-2 onboard probes

Using a cylindrical Langmuir probe and the authors’ proprietary two-channel pressure transducer, ionospheric plasma parameter distributions along the orbit of the Sich-2 satellite (Ukraine, 2011–2012) were measured. This paper is concerned with identifying the space–time location of ionospheric plasma disturbance sources, including the epicenters of actual earthquakes (before or during the satellite flyover) and incipient earthquakes on the subsatellite track, from the measured distributions of the electron density and temperature and the neutral particle temperature along the satellite orbit. To do this, the measured ionospheric plasma parameter distributions are connected to the coordinates on the subsatellite track.It is shown that local disturbances in the electron density and temperature and neutral particle temperature distributions in the satellite orbit in the ionosphere may serve as indicators of seismic activity on the subsatellite track. The epicenters of incipient earthquakes may be set off from other plasma parameter disturbance sources associated with seismic activity using information provided by special monitoring and survey centers that monitor the current seismic situation.     

LSDW速度随激光参数和环境气体压强变化规律的实验研究

对LSDW速度随入射激光能量、激光聚焦角度和环境气体压强变化的规律进行了实验研究。研究发现,入射单脉冲激光能量越大,聚焦角度越小,环境气体压强越小,LSDW的传播速度越大。实验测量得到的LS-DW速度随入射激光能量、聚焦角度和环境气体压强的变化规律与一维理论公式中体现的规律完全一致。将相同条件下的实验数据与理论结果进行比较后发现,二者在定性上取得了很好的一致性,但在定量上有所差别,因此需要对现有一维理论公式进行修正,以便更深入地研究LSDW的传播演化规律和特性。     

引导场对无碰撞电流片低频电磁不稳定性的影响

通过数值求解无碰撞电流片中可压缩磁流体力学模型下得到的一般形式的色散关系,讨论了无碰撞电流片中引导场对低频电磁波不稳定性的影响.结果表明,平衡态磁场中的引导场,对于三维扰动传播的波不稳定性有很强的影响.(1)在电流片中间平面上(z=0),无引导场时,没有不稳定性发生,但若存在引导场,不稳定性便发生,并随着引导场的增强,不稳定性明显增强,不稳定的波模可能是低混杂模.(2)在中间平面附近(z=0.2),电流片是不稳定的.随着引导场的增强,不稳定性增长率明显地增强,不稳定的波模从平行和反平行两个方向传播变为反平行方向一个方向传播,并且是斜传播的,具有低频哨声模或低混杂模的特征.(3)在电流片边缘附近(z=0.8),引导场对不稳定的波模和增长率没有明显影响,不稳定的波模都是准平行的哨声波.      

Influence and optimization of parameters of prepreg viscosity during placement

This paper tested the viscosity of prepreg in the automatic placement process, and conducted the probe and placement-90° peel tests through the test systems. The law of variation of prepreg viscosity during the laying process was studied through these tests under different conditions by taking the peel force to intuitively and quantitatively characterise the viscosity of the prepreg.The results show that this viscosity is inversely proportional to the laying rate, proportional to the laying pres...     

Modeling and simulation of bow wave effect in probe and drogue aerial refueling

In a probe and drogue aerial refueling system, the bow wave of the receiver aircraft will produce a strong aerodynamic effect on the drogue once the receiver follows the drogue at a close distance. It is a major difficulty of docking control in the probe and drogue refueling. This paper analyses the bow wave effect and presents a simple method to model it. Firstly, the inviscid flow around the receiver is modeled based on the stream function defined by basic stream singularities.Secondly, a correction function is developed to eliminate the error caused by the absence of air viscosity. Then, the aerodynamic coefficients are used to calculate the induced aerodynamic force on the drogue. The obtained model is in an analytical form that can be easily applied to the controller design and the real-time simulations. In the verification part, computational fluid dynamics(CFD)simulation tests are conducted to validate the obtained flow fields and aerodynamic forces. Finally,the modeling method is applied to an F-16 receiver aircraft in a previously developed autonomous aerial refueling simulation system. The simulations results are analyzed and compared with the NASA flight-test data, which demonstrates the effectiveness of the proposed method.     

基于波形综合的雷达目标识别的自相关法

讨论雷达反隐身技术中的目标识别方法。重点介绍基于自然频率的波形综合雷达目标识别方法。针对实际雷达目标均被噪声污染 ,提出一种抗干扰能力强的自相关函数算法 ,给出该算法的实现步骤 ,进行计算机仿真试验 ,仿真结果表明 ,所提出的雷达目标识别方法有效。     

旋转飞行器应答式速度测量研究

由于受单天线的方向性限制,采用传统的天线模式不能实现对旋转飞行器连续跟踪测量。通过多天线分集和合成2种模式,可以实现信号的全向接收和转发,但同时带来接收信号阶跃以及信号干涉区等新问题,这些问题会导致信号变化剧烈,能否正确描述信号动态下的特征,并分析其对设备多普勒回路的影响是实现连续高精度跟踪的关键。本文推导了多天线动态下的双程应答多普勒测速方程,详细分析了分集、合成2种天线模式下信号的特征及信号对多普勒回路的影响,并根据分析结果对多普勒回路提出改进建议。     

环氧TDE-90/双马来酰亚胺共混树脂基透波复合材料的研究

利用TDE-90环氧树脂与4501A双马来酰亚胺树脂共混体系，获得了适于缠绕成型和手糊成型的高性能树脂基体。通过对粘度曲线、凝胶特性曲线及DSC分析确定了成型工艺。共混树脂与TDE-85环氧树脂、4501A树脂的浇铸体及相应复合材料性能的比较，表明共混树脂具有较好的工艺性、较低的介电损耗；在155℃时，其强度、模量的保留率均高于TDE-85环氧树脂。共混复合材料适合于高温、高速机载雷达罩生产。