基于粗集理论的系统评估

讨论了基于粗集理论的系统综合评估和运用粗集理论进行系统评估指标体系的选择。给出了基于粗集理论进行系统综合评估的一般步骤，研究了运用粗集基本理论进行评估指标体系建立的方法，最后的实验结果验证了本文方法的有效性。     

Microstructure and Optical Characterization of Magnetron Sputtered NbN Thin Films

Some fundamental studies on the preparation, structure and optical properties of NbN films were carried out. NbN thin films were deposited by DC reactive magnetron sputtering at different N2 partial pressures and different substrate temperatures ranging from –50 ℃ to 600 ℃. X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM) were employed to characterize their phase com- ponents, microstructures, grain sizes and surface morphology. Optical properties inclusive of refractive indexes, extinction coefficients and transmittance of the NbN films under different sputtering conditions were measured. With the increase in the N2 partial pressure, δ-NbN phase structure gets forming and the grain size and lattice constant of the cubic NbN increasing. The deposited NbN film has relatively high values of refractive index and extinction coefficient in the wavelength ranging from 240 nm to 830 nm. Substrate tem- perature exerts notable influences on the microstructure and optical transmittance of the NbN films. The grain sizes of the δ-NbN film remarkably increase with the rise of the substrate temperature, while the transmittance of the films with the same thickness decreases. Ultra-fine granular film with particle size of several nanometers forms when the substrate is cooled to –50 ℃, and a remarkable aug- mentation of transmittance could be noticed under so low a temperature.     

A Novel Onboard-gateway-based Mechanism to Improve TCP Performance in Aeronautical Satellite Networks

The IP-based networks on aircraft serve to support Internet services via satellites. However, in aeronautical satellite hybrid net- works,the TCP protocol performance often deteriorates due to improper decreases and slow recovery of the congestion window. This paper proposes a window size determination and notification mechanism, onboard-gateway-based mechanism (OGBM), which is based on the onboard gateway in the networks on aircraft. A cross-layer approach is adopted by the onboard gateway to obtain the satellite link bandwidth information. And then, by the gateway, through changing the receiver’s advertised window field in ACK packets, TCP sources are notified of the window size of each TCP source calculated on the ground of bandwidth delay product and flow numbers. The mechanism is able to avoid improper changes of TCP window and serve multiple users. Simulation results show that the mechanism with the fairness index close to 1 improves TCP performance in aeronautical satellite networks.     

基于数据包络分析的民航发动机维修效果评价

对民航发动机维修效果进行评价可以为发动机承修厂的选择提供决策支持,同时有助于发现发动机承修厂的潜在问题。为了实现发动机维修效果的评价,首先提出了评价指标选择的原则,在此基础上给出了发动机维修效果评价指标体系,建立了基于数据包络分析的C2WH模型的发动机维修效果评价模型,并对模型的构建过程进行了描述。针对决策单元输入输出...     

两种质量多元诊断理论(英文)

工厂中,多工序、多指标系统是常见的。在该系统中推行质量控制与诊断必须考虑下列两点：上工序对下工序的影响以及指标间的相关性。由于这两点是同时存在的,使得问题更加复杂。我们需要应用张公绪教授在１９９６年提出的两种质量多元诊断理论来解决此复杂问题。本文介绍了其基本原理和具体应用,实际应用结果与理论是一致的。     

基于数值模拟的超塑成形压力—时间曲线计算机辅助设计

确定压力随时间变化的关系曲线对于超塑成形工艺设计非常重要,本文在超塑成形压力计算时引入能量消耗控制策略,提出了一种压力－时间（Ｐ－Ｔ）曲线设计方法即恒能耗率法,实现了基于有际元数值模拟的超塑成形Ｐ－Ｔ曲线计算机辅助设计,文中对有关的压力控制算法及算式进行了较详细的介绍和推导,分别给出了半球壳自由胀形和圆筒形凹模约束成形过程的Ｐ－Ｔ曲线设计计算实例,并对计算结果进行了讨论,本文的研究拓宽了刚粘塑性有     

光纤表面等离子体波传感器用于固化监测的研究(英文)

光纤表面等离子体波传感器在理论上具有较高的研究价值 ,并且因为结构简单、灵敏度高等特点在工程上得到广泛应用。使用光纤表面等离子体波来测试折射率 ,方法简单、灵敏。本文介绍了利用光纤表面等离子体波传感器使用这种方法对环氧树脂复合材料进行固化监测。文中对不同折射率的溶液进行了折射率测试的研究 ,并设计了一种用于折射率测量的性能稳定、操作方便的光纤传感探头及整套的测试系统 ,用以对固化过程中环氧树脂在不同阶段的折射率变化进行实测。测试结果表明 ,该系统工作稳定、可靠 ,测试结果符合实际情况     

舰载机着舰指标体系构建

舰载机着舰的难度很大、要求很高,而着舰系统的复杂性又使得指标要求涉及很多方面。为了从整体上明确着舰的指标要求,从而有利于着舰理论和工程等研究,整理了公开文献中分散的指标要求,并梳理了指标间的逻辑关系,最终构建了着舰指标体系,将指标归纳到总体框架中。研究结果对着舰的控制与分析等具有一定的参考价值。     

航磁补偿技术及补偿质量的评价方法

航磁补偿的目的是要消除飞机平台引入的干扰磁场,对于高精度航空磁探来说,磁补偿质量直接制约了探测效果。文章按照航磁补偿的执行步骤进行了飞机平台磁干扰建模、模型参数求解方法、补偿飞行方案。另外,为了对补偿飞行的质量进行有效控制,采用量化指标对磁补偿效果进行评价,判定补偿效果的优劣。最后,基于 MFC软件平台开发了航磁补偿系数求解及补偿质量评价软件。     

基于约束优化的舰艇区域防空作战能力需求生成

作战能力需求生成是在满足多约束条件下完成的,寻求约束集是能力需求生成的重点;以舰空导弹区域防空为背景,通过对作战需求约束、能力需求约束、技术发展约束以及其他因素约束进行综合分析,提取制约能力指标生成的约束集,建立舰艇防空作战效能目标函数,采用基于罚函数法的快速粒子群算法进行能力指标的约束优化求解;以最大预警距离为变量,对其他作战能力指标优化前后的曲线图进行仿真验证,定量生成舰艇区域防空作战所需的能力指标值,验证了模型算法的可行性,为舰艇区域防空作战能力需求生成提供了定量化依据。