舰载机着舰指标体系构建

舰载机着舰的难度很大、要求很高,而着舰系统的复杂性又使得指标要求涉及很多方面。为了从整体上明确着舰的指标要求,从而有利于着舰理论和工程等研究,整理了公开文献中分散的指标要求,并梳理了指标间的逻辑关系,最终构建了着舰指标体系,将指标归纳到总体框架中。研究结果对着舰的控制与分析等具有一定的参考价值。     

Microstructure and Optical Characterization of Magnetron Sputtered NbN Thin Films

Some fundamental studies on the preparation, structure and optical properties of NbN films were carried out. NbN thin films were deposited by DC reactive magnetron sputtering at different N2 partial pressures and different substrate temperatures ranging from –50 ℃ to 600 ℃. X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM) were employed to characterize their phase com- ponents, microstructures, grain sizes and surface morphology. Optical properties inclusive of refractive indexes, extinction coefficients and transmittance of the NbN films under different sputtering conditions were measured. With the increase in the N2 partial pressure, δ-NbN phase structure gets forming and the grain size and lattice constant of the cubic NbN increasing. The deposited NbN film has relatively high values of refractive index and extinction coefficient in the wavelength ranging from 240 nm to 830 nm. Substrate tem- perature exerts notable influences on the microstructure and optical transmittance of the NbN films. The grain sizes of the δ-NbN film remarkably increase with the rise of the substrate temperature, while the transmittance of the films with the same thickness decreases. Ultra-fine granular film with particle size of several nanometers forms when the substrate is cooled to –50 ℃, and a remarkable aug- mentation of transmittance could be noticed under so low a temperature.     

A Novel Onboard-gateway-based Mechanism to Improve TCP Performance in Aeronautical Satellite Networks

The IP-based networks on aircraft serve to support Internet services via satellites. However, in aeronautical satellite hybrid net- works,the TCP protocol performance often deteriorates due to improper decreases and slow recovery of the congestion window. This paper proposes a window size determination and notification mechanism, onboard-gateway-based mechanism (OGBM), which is based on the onboard gateway in the networks on aircraft. A cross-layer approach is adopted by the onboard gateway to obtain the satellite link bandwidth information. And then, by the gateway, through changing the receiver’s advertised window field in ACK packets, TCP sources are notified of the window size of each TCP source calculated on the ground of bandwidth delay product and flow numbers. The mechanism is able to avoid improper changes of TCP window and serve multiple users. Simulation results show that the mechanism with the fairness index close to 1 improves TCP performance in aeronautical satellite networks.     

卫星遥测功率谱分析和调制度测量方法研究

残余载波调制是卫星测控中的常用调制体制。文章从理论上给出了该体制下信号的功率谱密度表达式,得到奇次谐波谱线展宽等结论,并通过仿真和实验进行了验证。利用所得结论讨论了遥测调制度测量方法,提出通过功率谱的2阶边带进行测量可以使结果得到改善。     

两种质量多元诊断理论(英文)

工厂中,多工序、多指标系统是常见的。在该系统中推行质量控制与诊断必须考虑下列两点：上工序对下工序的影响以及指标间的相关性。由于这两点是同时存在的,使得问题更加复杂。我们需要应用张公绪教授在１９９６年提出的两种质量多元诊断理论来解决此复杂问题。本文介绍了其基本原理和具体应用,实际应用结果与理论是一致的。     

基于数值模拟的超塑成形压力—时间曲线计算机辅助设计

确定压力随时间变化的关系曲线对于超塑成形工艺设计非常重要,本文在超塑成形压力计算时引入能量消耗控制策略,提出了一种压力－时间（Ｐ－Ｔ）曲线设计方法即恒能耗率法,实现了基于有际元数值模拟的超塑成形Ｐ－Ｔ曲线计算机辅助设计,文中对有关的压力控制算法及算式进行了较详细的介绍和推导,分别给出了半球壳自由胀形和圆筒形凹模约束成形过程的Ｐ－Ｔ曲线设计计算实例,并对计算结果进行了讨论,本文的研究拓宽了刚粘塑性有     

基于季节特性的航材备件定量订货模型

为达到降低库存费用、保障飞机持续适航的目的,建立定量订货模型,并通过对部分航材消耗数据的分析,提出利用中心移动平均法求得季节指数的方法,将其作为权系数对该模型进行修正,以提高航材采购数量的精确性。实验证明,该模型能有效地为航材备件的计划采购提供理论指导和决策支持。     

复合材料胶接损伤的指数监测方法

为了监测复合材料胶接损伤,基于主动Lamb波和时频分析,提出了一种复合材料损伤监测的指数法。通过对Lamb波信号进行时频分析,提取波形包络。通过计算得到损伤散射信号,选取对损伤敏感的直达波波包,将此波包在结构出现损伤后的能量变化值与损伤前的能量之比作为损伤指示。该方法不用选择特定的Lamb波模式,解决了Lamb波在复合材料结构中存在的频散、多模式及模式转换给信号分析带来的困难。同时在复合材料胶接的损伤演化试验中,对该方法进行了应用验证研究。结果表明:该方法可以用于复合材料胶接损伤的定性和定量分析。     

基于粗集理论的系统评估

讨论了基于粗集理论的系统综合评估和运用粗集理论进行系统评估指标体系的选择。给出了基于粗集理论进行系统综合评估的一般步骤，研究了运用粗集基本理论进行评估指标体系建立的方法，最后的实验结果验证了本文方法的有效性。     

光纤表面等离子体波传感器用于固化监测的研究(英文)

光纤表面等离子体波传感器在理论上具有较高的研究价值 ,并且因为结构简单、灵敏度高等特点在工程上得到广泛应用。使用光纤表面等离子体波来测试折射率 ,方法简单、灵敏。本文介绍了利用光纤表面等离子体波传感器使用这种方法对环氧树脂复合材料进行固化监测。文中对不同折射率的溶液进行了折射率测试的研究 ,并设计了一种用于折射率测量的性能稳定、操作方便的光纤传感探头及整套的测试系统 ,用以对固化过程中环氧树脂在不同阶段的折射率变化进行实测。测试结果表明 ,该系统工作稳定、可靠 ,测试结果符合实际情况