启动过程压缩空气储能向心涡轮三维流动特性研究

为研究压缩空气储能系统的向心涡轮启动过程内部流动损失特性，本文采用全三维计算流体动力学（CFD）模型对其启动过程过程进行了数值模拟，与实验结果对比表明，虽然该模型在启动初始阶段与转速稳定阶段存在一定误差，但仍能够整体上反映启动过程的效率变化特征。在此基础上，进一步分析了启动过程中动叶通道内损失区及流场变化特征，结果发现，动叶进口攻角是影响内部流场主要因素：在启动初始阶段，叶轮进口攻角较大，动叶载荷集中在叶片前缘，形成明显的通道分离涡与前缘涡；在快速启动段，攻角减小，动叶载荷沿弦长分布更为均匀，通道分离涡及前缘涡逐渐减小并向叶片吸力面迁移。在整个启动阶段，动叶通道内高损失区也随着通道分离涡逐渐迁移且变小，并向相邻叶片吸力面集中。     

Finite time non-singular sliding mode control for spinning tether system with prescribed performance under artificial gravity mission

In this paper, the spinning tether system (STS) is applied to produce the artificial gravity overload with a proposed spin-up scheme in elliptical transfer orbits. To improve the comfort of the astronauts during spinning, the combined control scheme with tension and thrust is designed for spin-up. Then, based on the novel performance function and sliding mode technology, a finite time prescribed performance controller is proposed to track angular velocity for the desired artificial gravity overload. Compared with the existing works, the tracking error is controlled within the preset transient performance and converged to the origin within finite time even in the presence of unknown external disturbance. The stability of closed-loop tracking system is proved by Lyapunov theorem. Finally, the numerical simulations are given to demonstrate the effectiveness and robustness of the proposed controllers in the artificial gravity mission.     

变循环发动机风车起动建模及仿真研究

为了满足变循环发动机风车起动性能仿真的需求，建立了变循环发动机部件级风车起动模型。针对旋转部件等熵效率不连续的问题，提出使用换算扭矩代替等熵效率的方法，给出了旋转部件全转速特性拓展方法。提出了考虑点火及燃烧稳定性的燃烧室稳定性模型。考虑了变循环发动机的8个可调参数，采用差分进化算法对变循环发动机的风车及风车起动性能进行了优化。结果表明，风车状态时，变循环发动机在单外涵模态具有更高的核心机物理转速，有利于点火之后核心机物理转速快速趋于其慢车值。单外涵模态时，变循环发动机在风车状态的可调参数仅与飞行马赫数有关，为了保持较高的核心机物理转速，后涵道引射器外涵面积需随飞行马赫数的增加而减少，其余参数皆固定在其最佳值。飞行高度6km、马赫数0.8时，变循环发动机在单外涵模态下的风车起动时间为1.4s。风车起动过程中燃油流量的增长主要受燃烧稳定性所约束。通过对可调参数的优化，可使变循环发动机在风车起动过程中的关键性能参数最大程度的逼近其限制值，从而减少风车起动时间。     

An improved altimeter-derived gravity anomaly from shipborne gravity based on the mean sea surface height constraint factors method

Coastal marine gravity modeling faces challenges due to the degradation of the quality and poor coverage of altimeter data in coastal regions. The effective fusion of shipborne gravity data and altimeter-derived marine gravity data can make shipborne gravity data more useful for the accurate estimation of altimeter-derived coastal marine gravity. A mean sea surface height constraint factor (MSSHCF) method based on the ordinary kriging method and the remove-restore technique is proposed to fuse altimeter-derived gravity model with shipborne gravity data. In this method, all data are standardized during the interpolation process to reduce the error and mean sea surface as a vertical variable is added to the semi-variance function in ordinary kriging to obtain the residual shipborne gravity as corrected data source. The coastal marine gravity models V2.1 and V3.1 which fused altimeter-derived gravity data with shipborne gravity data and V1.1 without shipborne gravity data at a spatial resolution of 1′×1′ can be obtained. Validation experiments show that the accuracy of the gravity model V3.1 obtained by the MSSHCF method more closely agrees with the validated gravity model DTU17 and SS V31 than the model V2.1 obtained by the ordinary kriging interpolation method and the V1.1 model. Our results were validated against shipborne gravity data; the accuracy of model V3.1 was 4.95 % higher than the model V1.1 in South China Sea area A and 2.48 % higher in South China Sea area B. Meanwhile, the accuracy of model V3.1 was 2.07 % higher than model V2.1 in South China Sea area A and 2.42 % higher in South China Sea area B. The effects of distance from the coast and sea depth on the marine gravity model were also evaluated. The results show that the gravity model V3.1 has higher accuracy with the change in ocean distance and depth than the V2.1 and V1.1 gravity models. Thus, our study shows that the MSSHCF method effectively refines coastal altimeter-derived gravity using shipborne gravity data.     

电动膨胀循环液氧甲烷变推力发动机动态特性研究

电动泵压式液体火箭发动机受到了广泛的关注，然而电池有限的输出功率和过于沉重的质量成为限制电动泵压式发动机发展的重要因素。为此本文提出了一种电机驱动燃料泵和涡轮驱动氧泵的电动膨胀循环液体火箭发动机方案，并着重研究了该型发动机的动态响应特性。首先给出了20 kN级电动膨胀循环发动机的技术指标和部组件参数，进一步基于AMESim平台建立了全系统动力学模型，验证了方案的可行性和部组件动力学模型的准确性，并深入研究了单点工况和调节工况的动态响应特性。结果表明，针对启动过程而言，涡轮泵调整时间较电动泵长，这降低了系统响应速度，但工况越高，系统响应速度越快；高工况启动时，甲烷在冷却通道内的剧烈相变和跨临界状态的不连续物性相互耦合易引发系统振荡；就调节过程而言，推力调节时普遍存在超调或凹坑现象，且系统在两相同工况之间调节时，正调响应速度快于负调，这也导致阶跃幅值相等条件下的系统调整时间随目标工况升高而缩短。     

Autonomous navigation for lunar final approach based on gravity gradient measurements

Lunar final approach navigation is critical for pin-point lunar landing in future missions. This study investigates the use of lunar gravity gradient measurements for autonomous navigation of a lunar probe during the final approach phase. As the spacecraft approaches the Moon, the strength of gravity gradient signals improves. A spaceborne gravity gradiometer can precisely measure local gravity gradients, and the latest lunar gravity model GL1500E is used to provide reference values. The employed truncation degree and order of the gravity model are increased stepwise considering the decreasing altitude of the spacecraft in order to reach a compromise between computational costs and model accuracy. An iterative Kalman filter is developed for coupled orbit and attitude estimation using gravity gradient measurements and attitude quaternions obtained from star sensors. A simulated spacecraft with a gradiometer noise level of 0.01 E is considered. Simulation results show that the spacecraft’s position converges rapidly and achieves an accuracy of less than 100 m at the last epoch.