基于Web services的软件集成技术研究

本文对Web services技术的基本特点进行了探讨,并应用ENOVIA Web service和SOAP的开放特性,设计了直升机设计数据在全生命周期管理系统与第三方软件系统之间交换的接口,解决了设计信息跨平台通讯和系统的灵活集成问题。     

共轴式直升机旋翼气动干扰对航向操纵的影响

利用共轴式旋翼风洞实验结果，结合轻型共轴式直升机M16飞行中的现象，分析了上下旋翼气动干扰对共轴式直升机过渡飞行中航向操纵的影响。介绍了直升机由悬停转入垂直上升、平飞中加减速和转入爬升与下滑等过程中，由于上下旋翼干扰发生了变化，使直升机航向发生偏转后飞机的反应情况，以及在这种情况下应进行的相应操纵。所得结果对研究共轴式直升机的操稳特性有重要意义。     

直升机涡环状态试验数据处理研究

采用神经网络误差反向传播算法,以旋翼涡环状态试验数据为基础,研究了桨叶负扭度对直升机涡环状态特性的影响,分析了负扭度变化对旋翼扭矩、拉力平均值及脉动幅度的影响。计算结果表明,神经网络模型能够准确预测桨叶负扭度对直升机涡环状态的影响。     

直升机“地面共振”力学模型的探讨

 <正> I_B 桨叶绕垂直铰的转动惯量I_(?),I_(?),I_(?) 机身绕过其重心O的x,y,z 轴的转动惯量ι 桨叶长度m_B 单片桨叶的质量     

Modeling novel methodologies for unmanned aerial systems–Applications to the UAS-S4 Ehecatl and the UAS-S45 Bálaam

The rising demand for Unmanned Aerial Systems(UASs) to perform tasks in hostile environments has emphasized the need for their simulation models for the preliminary evaluations of their missions. The efficiency of the UAS model is directly related to its capacity to estimate its flight dynamics with minimum computational resources. The literature describes several techniques to estimate accurate aircraft flight dynamics. Most of them are based on system identification. This paper presents an alternative methodology to obtain complete model of the S4 and S45 unmanned aerial systems. The UAS-S4 and the UAS-S45 models were divided into four sub-models, each corresponding to a specific discipline: aerodynamics, propulsion, mass and inertia, and actuator. The‘‘aerodynamic" sub-model was built using the Fderivatives in-house code, which is an improvement of the classical DATCOM procedure. The ‘‘propulsion" sub-model was obtained by coupling a two-stroke engine model based on the ideal Otto cycle and a Blade Element Theory(BET) analysis of the propeller. The ‘‘mass and the inertia" sub-model was designed utilizing the Raymer and DATCOM methodologies. A sub-model of an actuator using servomotor characteristics was employed to complete the model. The total model was then checked by validation of each submodel with numerical and experimental data. The results indicate that the obtained model was accurate and could be used to design a flight simulator.     

某型直升机维修保障能力生成模式研究

某型直升机是陆航部队近年来新装备的主力作战机型,目前正处于装备部队初期的故障高发阶段,而部队有限的装备维修保障能力直接制约了该型机战斗力的形成。本文结合前期对某型直升机的自身技术特点及其装备维修保障的研究,综合使用单位反映的各种问题,深入剖析了制约其维修保障能力形成的原因,以期为后续新装备快速形成装备维修保障能力提供借鉴。     

Real-time object tracking via least squares transformation in spatial and Fourier domains for unmanned aerial vehicles

This paper addresses the problem of real-time object tracking for unmanned aerial vehicles. We consider the task of object tracking as a classification problem. Training a good classifier always needs a huge number of samples, which is always time-consuming and not suitable for realtime applications. In this paper, we transform the large-scale least-squares problem in the spatial domain to a series of small-scale least-squares problems with constraints in the Fourier domain using the correlation filter technique. Then, this problem is efficiently solved by two stages. In the first stage, a fast method based on recursive least squares is used to solve the correlation filter problem without constraints in the Fourier domain. In the second stage, a weight matrix is constructed to prune the solution attained in the first stage to approach the constraints in the spatial domain. Then, the pruned classifier is used for tracking. To evaluate proposed tracker's performance, comprehensive experiments are conducted on challenging aerial sequences in the UAV123 dataset. Experimental results demonstrate that proposed approach achieves a state-ofthe-art tracking performance in aerial sequences and operates at a mean speed of beyond 40 frames/s. For further analysis of proposed tracker's robustness, extensive experiments are also performed on recent benchmarks OTB50, OTB100, and VOT2016.     

直升机超短波通信链路分析

通过对超短波通信链路的分析,得出直升机超短波通信链路模型;以实现超短波电台通信距离要求为目标,分析通信链路中影响通信距离的各因素及其影响程度,并根据直升机实际情况,对机上配置多部超短波电台及与其他机载设备的电磁兼容性方面提出改善建议。     

直升机风险科目“斜坡起降”驾驶要领探讨

直升机在执行“紧急救援”和“抗震救灾”等特殊任务过程中往往不得已要进行风险科目“斜坡起降”。在这种情况下，操作上稍有不慎就会酿成重大事故，有的新机型在进行“斜坡起降”这一科目试验时甚至请国外飞行员来完成这项工作。文章就直升机“仰坡起降”、“顺坡起降”、“左横坡起降”和“右横坡起降”的操作要领作几点阐述，供飞行试验工程技术人员和飞行人员参考。     

无人机高速DS/FH混合扩频通信系统关键模块设计

针对UAV(Unmanned Aerial Vehicle,无人机)测控链路高抗干扰需求,给出了实现跳频速率20 000次/s的扩跳混合无人机测控数据链系统实现方案.系统采用跳频频率并行捕获模式.跳频源设计采用直接频率合成、DDS(Direct Digital Synthesis,直接数字频率合成)和PLL (Phase-Locked Loop,锁相环)相结合的混合频率合成技术.利用相位响应滤波器,通过正交调制技术完成MSK(Minimum Shift Keying,最小频移键控)、GMSK (GaussianMinimum Shift Keying,高斯最小频移键控)调制.通过推导得出2 bit差分解调输出与载波频率选择有关,且为四分之数据率的整数倍关系.然后通过实例分析给出了跳频频率间隔选取方法,即跳频间隔应当将临近跳频的主瓣分开,同时跳频载波频率应当设在其他跳频频谱的零点处.最后总结了高速扩跳频系统参数设计一般步骤.