12位串行A／D转换器MAX1247原理与应用

MAX1247是MAXIM公司推出的4通道12位串行A／D转换器，其内部具有SPI串行接口，高速、低功耗。本文详细介绍了MAXl247的工作原理、工作时序及与单片机系统的接口电路及有关的读写程序。     

Relationships between energetic storm particle events and interplanetary shocks driven by full and partial halo coronal mass ejections

We have analysed energetic storm particle (ESP) events in 116 interplanetary (IP) shocks driven by front-side full and partial halo coronal mass ejections (CMEs) with speeds $>$400 km s^?1during the years 1996–2015. We investigated the occurrence and relationships of ESP events with several parameters describing the IP shocks, and the associated CMEs, type II radio bursts, and solar energetic particle (SEP) events. Most of the shocks (57 %) were associated with an ESP event at proton energies $>$1 MeV.The shock transit speeds from the Sun to 1 AU of the shocks associated with an ESP event were significantly greater than those of the shocks without an ESP event, and best distinguished these two groups of shocks from each other. The occurrence and maximum intensity of the ESP events also had the strongest dependence on the shock transit speed compared to the other parameters investigated. The correlation coefficient between ESP peak intensities and shock transit speeds was highest (0.73 $\pm$ 0.04) at 6.2 MeV. Weaker dependences were found on the shock speed at 1 AU, Alfvénic and magnetosonic Mach numbers, shock compression ratio, and CME speed. On average all these parameters were significantly different for shocks capable to accelerate ESPs compared to shocks not associated with ESPs, while the differences in the shock normal angle and in the width and longitude of the CMEs were insignificant.The CME-driven shocks producing energetic decametric–hectometric (DH) type II radio bursts and high-intensity SEP events proved to produce also more frequently ESP events with larger particle flux enhancements than other shocks. Together with the shock transit speed, the characteristics of solar DH type II radio bursts and SEP events play an important role in the occurrence and maximum intensity of ESP events at 1 AU.     

白炽灯色温测量装置电路设计

介绍利用单片单板机接口电路完成对６Ｖ、３０Ｗ白炽灯光源与其对应的标准白炽灯光源的色温比对标定工作。     

航空发动机总温热电偶校检问题

由于航空总温热偶气动构件的复杂性，校验问题一直悬而未决。制成后的电偶热电特性迁移，及配套特性变化强调了配套校验是必要的。本文在着重分析了以上问题后，介绍了自行研制的已获国家专利的ＳＴＴ－１Ａ系列总温热电偶校验器。     

5A06铝合金超快变换极性VPTIG焊接工艺

研发了一种适用于铝合金材料的新型超快速变换变极性焊接工艺,以5A06为焊接对象,通过X射线探伤、拉伸试验、金相分析以及扫描电镜等手段对超快变换VPTIG焊接工艺进行了试验研究.试验结果表明,超快变换变极性,11G焊接工艺能够显著改善和提高5A06铝合金的焊接质量.     

A/D和D/A转换特性参数测试方法

简要介绍了A/D、D/A转换器的主要测试参数,着重讨论转换特性参数的测试方法及其在混合集成电路测试系统上的实现;同时还介绍了A/D、D/A转换器的一些其他测试方法。     

热处理真空淬火工艺的应用

超高强度钢在普通空气炉和盐炉中热处理后，零件表面氧化脱碳相对比较厚，再返回机加车间精加工，其高强度给机加带来不便。通过改进热处理工艺，采用保护气氛炉或真空炉淬火，在满足机械性能要求的前提下，实现少、无氧化热处理。     

TS-InSAR analysis for monitoring ground deformation in Lanzhou New District,the loess Plateau of China,from 2017 to 2019

Large-scale land creation projects involving the cutting of mountains to infill gullies for construction have been carried out in Lanzhou New District (LZND). However, there is an urgent need for comprehensive and detailed research on the spatiotemporal evolution of ground deformation in LZND. Based on Sentinel-1A SAR data, combined with the urban geological background, the ground deformation in LZND from 2017 to 2019 was analysed. Two independent, multi-temporal techniques, persistent scatterers interferometry (PS-InSAR) and the small baseline subset (SBAS-InSAR), were used to calculate the deformation time series, and the results were cross-verified. The time series-monitoring results of the SBAS and PS calculations exhibited strong consistency in LZND and verified the high reliability of the experimental results. The results showed the whole surface of the LZND from March 2017 to October 2019 maintained stability, and the deformation rate was primarily in the range of ?10 to 10 mm/year. However, ground deformation in the Xicha area was evident. The maximum annual deformation rates monitored by SBAS-InSAR and PS-InSAR were ?52.48 mm/year and ?56.35 mm/year, respectively. The most typical deformation areas include the built-up area and the land creation area. The surface subsidence area was concentrated in the filling area. The ground deformation range of LZND kept expanding and accelerating from 2017 to 2019. Land creation, urban construction, geology and precipitation were the primary factors contributing to local severe ground deformation. The results of this study provide reference for the regional urban planning in LZND.     

2A12 铝合金锻坯开裂故障分析

某产品用2A12铝合金锻坯在生产过程中发生开裂故障。本文对开裂锻坯进行了形貌观察与断口分析,并对比研究了热处理后开裂锻坯、未热处理锻坯和原材料铝棒。结果表明:开裂锻坯上的开裂模式为脆性开裂;开裂锻坯上的裂纹形成于热处理过程,形成原因应与锻造工艺控制不当导致锻坯在热处理过程中形成的粗晶有关。     

强五D飞机机尾罩下蒙皮铆钉松动、脱落原因浅析

分析了强五D飞机机尾罩下蒙皮铆钉松动、脱落的原因，提出了改进措施，并已应用于外场和成批生产。