Secondary instability of separated shear layers

The process through which a laminar flow undergoes transition to turbulence is of great fundamental and practical interest. Such a process is hugely complex as there are many diverse routes for a laminar flow to become turbulent flow. The transition process is usually initiated by flow instabilities—a primary instability stage followed by a secondary instability stage. This forms a rational framework for the early stage of a transition process and it is crucially important to understand the physics of instabilities leading to turbulence. This article reviews the results of studies on secondary instability of separated shear layers in separation bubbles and summaries the current status of our understanding in this area.     

适应弯扭隔肋的涡轮叶片转接段建模方法

针对涡轮冷却叶片弯扭冷却通道转接段的特点,提出了关联的转接段建模方法,通过曲线网格法生成工具片体裁剪叶身内型实体得到转接段,并以此为基础完成转接段建模,满足转接段与弯扭隔肋G1光滑转接的要求。详细分析了该方法的原理;提取了关键参数;利用UG(Unigraphics NX)二次开发平台开发了转接段的参数化建模模块,实现了适应弯扭隔肋的转接段建模。     

基于Transition SST模型的高雷诺数圆柱绕流数值研究

为了研究高雷诺数下圆柱绕流边界层的转捩现象和圆柱尾迹近壁区的流动特征,首先通过在典型雷诺数下采用Transition SST四方程转捩模型模拟圆柱绕流得到的结果与实验结果及采用SST k-ω两方程湍流模型模拟结果的对比分析,验证了Transition SST模型在模拟高雷诺数下圆柱绕流的优越性,并较为准确地预测出了圆柱绕流边界层的转捩现象及尾迹近壁区的流动特征。然后分别对亚临界区、临界区、超临界区和过临界区的圆柱绕流问题进行了数值模拟,分析了不同雷诺数下圆柱绕流的流场结构及圆柱表面压力系数、摩擦力系数的变化规律,研究了圆柱绕流近壁区的流动特征、边界层转捩的流动机理、转捩位置及其随雷诺数的变化规律。结果表明,亚临界区二维圆柱绕流边界层发生层流分离,无分离泡和转捩现象;临界区和超临界区二维圆柱绕流边界层先产生了分离泡现象,之后流动发生了转捩并在转捩后发生湍流分离;过临界区二维圆柱绕流边界层流动在转捩之后发生湍流分离,无分离泡现象;在临界区、超临界区和过临界区,二维圆柱绕流边界层转捩位置随雷诺数增大向前驻点移动。     

过渡金属/稀土金属氧化物纳米粒子催化AP热分解研究

1引言纳米材料由于特殊的表面特性而作为催化剂被广泛地研究。按一定的比例将不同的催化剂进行掺杂混合,有可能获得优于单一催化剂的催化性能。如Cu-Zn纳米催化剂就可替代昂贵的铂或钯催化剂实现对某些有机化合物氢化反应的催化[1]。随着纳米技术的发展,纳米过渡金属氧化物[2](     

横列式双倾转旋翼机控制系统研究CSCD

针对横列式双倾转旋翼机平飞加速过渡过程中的标称速度轨迹跟踪问题,提出了通过升力占比划分过渡阶段,实现标称轨迹的工程化设计。基于经典PID理论,分别设计了各过渡阶段各通道控制律和控制参数,提出了总距余弦分配的操纵分配方法,并解决了过渡过程中严重的纵垂向耦合问题。仿真结果表明,该纵向控制策略在强干扰下仍可以实现对象飞行器的平稳过渡。     

Remarks on “A new non-specificity measure in evidence theory based on belief intervals”

Two types of uncertainty co-exist in the theory of evidence: discord and non-specificity. From 90s, many mathematical expressions have arisen to quantify these two parts in an evidence. An important aspect of each measure presented is the verification of a coherent set of properties. About non-specificity, so far only one measure verifies an important set of those properties. Very recently, a new measure of non-specificity based on belief intervals has been presented as an alternative measure that quantifies a similar set of properties (Yang et al., 2016). It is shown that the new measure really does not verify two of those important properties. Some errors have been found in their corresponding proofs in the original publication.     

三向碳/碳材料转捩压力的测量

为评估三向碳/碳材料的烧蚀性能，在北京空气动力研究所研制的FD—04F电弧加热器上对三向碳／碳材料进行了滑行试验，测出了三向碳／碳材料的转接压力。试验结果表明：滑行试验在测量转接压力方面是有效的，并给出了三向碳／碳模型的转授压力数据和最终外形形状。     

基于IDDES方法和γ-Re_θ转捩模型的粗糙颗粒诱导高速边界层强制转捩模拟

采用γ-Re_θ转捩模型与IDDES (Improved Delayed Detached Eddy Simulation)相结合的方法对BAM6QT (Boeing/AFOSR Mach-6 Quiet Tunnel)中的马赫6来流条件下粗糙颗粒诱导转捩情况进行了数值模拟研究,通过与试验测量的压力脉动均方根值、脉动主频和边界层内的皮托压分布的定量对比及与文献中DNS (Direct Numerical Simulation)流场结构的定性对比,表明该方法可以捕捉粗糙单元诱导出的流向涡,能够模拟颗粒前缘分离激波和弓形激波之间的震荡现象,能够模拟流向涡向下游的发展失稳过程及其脉动发展过程。计算结果表明流向涡结构在粗糙颗粒下游40倍颗粒直径位置开始破碎,非定常扰动能也在该点附近增长达到最大值。粗糙单元诱导出了明显的条带涡结构,其中低速条带处于边界层上层,在向下游发展的过程中逐渐扩散至边界层外缘并耗散掉。高速条带位于边界层底部,在向下游发展的同时往展向两侧拓展,最终展向上多条高速条带接触并互相耦合,导致最后条带涡结构的破碎和尾迹区边界层的转捩。     

Transition control of a tail-sitter unmanned aerial vehicle with L1 neural network adaptive control

The main task of this work is to design a control system for a small tail-sitter Unmanned Aerial Vehicle(UAV) during the transition process. Although reasonable control performance can be obtained through a well-tuned single PID or cascade PID control architecture under nominal conditions, large or fast time-varying disturbances and a wide range of changes in the equilibrium point bring nonlinear characteristics to the transition control during the transition process, which leads to control prec...