7085铝合金残余应力及加工变形的数值仿真与试验

毛坯残余应力的测量以及零件的加工变形分析是航空整体结构件数控加工工艺研究的难题。应用MSC.Marc软件对某型飞机主起支撑接头的7085铝合金锻件毛坯的淬火-压缩工艺进行了数值仿真,获得了毛坯残余应力分布趋势;应用X射线衍射法与钻孔法测量了毛坯表层残余应力分布,提出了基于系数修正法的毛坯残余应力分析方法,通过最小二乘法（LSM）拟合仿真值与试验值以获得应力修正系数,并对毛坯残余应力分布的仿真结果进行修正,获得了实际毛坯的残余应力分布;由此进行了主起支撑接头缩比零件加工变形仿真与验证试验。研究结果表明：7085铝合金块状毛坯残余应力数值仿真结果与测试结果的趋势吻合,为应力修正提供了物理基础;相对于未修正的应力分布,基于修正后的应力分布仿真获得的变形结果精度提高了50%;7085-T7452铝合金的毛坯残余应力是导致主起支撑接头加工变形的主要因素。     

Friction moment analysis of space gyroscope bearing with ribbon cage under ultra-low oscillatory motion

This paper presents the model of calculating the total friction moment of space gyroscope ball bearings which usually work under ultra-low oscillatory motion and are very sensitive to the friction moment. The aim is to know the proportion of the friction moment caused by each frictional source in the bearing＇s total friction moment, which is helpful to optimize the bearing design to deduce the friction moment. In the model, the cage dynamic equations considering six degree-of-freedom and the balls dynamic equations considering two degree-of-freedom were solved.The good trends with different loads between the measured friction moments and computational results prove that the model under constant rate was validated. The computational results show that when the speed was set at 5 r/min, the bearing＇s maximum total friction moment when oscillation occurred was obviously larger than that occurred at a constant rate. At the onset of each oscillatory motion, the proportion of the friction moment caused by cage in the bearing＇s total friction moment was very high, and it increased with the increasing speed. The analyses of different cage thicknesses and different clearances between cage pocket and ball show that smaller thickness and clearance were preferred.     

An extrapolation approach for aeroengine’s transient control law design

Transient control law ensures that the aeroengine transits to the command operating state rapidly and reliably. Most of the existing approaches for transient control law design have complicated principle and arithmetic. As a result, those approaches are not convenient for application. This paper proposes an extrapolation approach based on the set-point parameters to construct the transient control law, which has a good practicability. In this approach, the transient main fuel control law for acceleration and deceleration process is designed based on the main fuel flow on steady operating state. In order to analyze the designing feature of the extrapolation approach, the simulation results of several different transient control laws designed by the same approach are compared together. The analysis indicates that the aeroengine has a good performance in the transient process and the designing feature of the extrapolation approach conforms to the elements of the turbofan aeroengine.     

航空发动机实时寿命监视及数据处理方法研究

ＡＥＲＯＥＮＧＩＮＥＬＩＦＥＭＯＮＩＴＯＲＩＮＧＡＮＤＲＥＡＬ－ＴＩＭＥＤＡＴＡＰＲＯＣＥＳＳＩＮＧＨｅＪｉｎｇｌａｎ，ＨｏｎｇＪｉｅ，ＬｉＱｉｈａｎ（４ｔｈＤｅｐｔ．ＢｅｉｊｉｎｇＵｎｉｖｅｒｓｉｔｙｏｆＡｅｒｏｎａｕｔｉｃｓａｎｄＡｓｔｒｏｎａｕ...     

酚醛树脂固化度的X射线衍射分析

发展使用Ｘ射线衍技术对酚醛树脂固化度进行研究，确定了酚醛树脂固化度与Ｘ射线散射最大值的 关系，得出了利用２θ角来标定树脂固化度的公式。该方法具有快速、无损、灵敏度主同的优点，并可适用于各种不同的酚醛树脂。     

飞机噪声预测和分析

根据中国民航规章中有关飞机适航噪声审定的要求和噪声预测原理建立了飞机噪声预测系统软件。该软件除可预测飞机适航噪声审定的起飞、进场和边线有效感觉噪声级外,还可计算巡航过程机体表面声压分布。各种噪声源的声功率在软件中均可单独计算,因此改变发动机和飞机参数可以考查这些参数对声功率的影响;对发动机和飞机设计有参考价值。通过算例计算出的起飞、进场和边线有效感觉噪声级与实测结果符合较好,能很好地满足工程应用需要。     

质子交换膜燃料电池及其空间应用

介绍了质子交换膜燃料电池(PEMFC)、可再生燃料电池(RFC)的工作原理、性能和空间应用特点，以及发展航空航天器用可再生PEMFC系统的必要性和可行性。讨论了PEMFC和可再生PEMFC系统所面临的技术难点。最后，针对我国的实际情况，提出了分阶段发展PEMFC和可再生PEMFC的建议。     

数控系统瞬时故障容错技术研究

本文研究的瞬时故障容错技术是以故障掩盖和故障恢复的思想为基础的新的提高可靠性的技术方法,建立了数控系统容错模型和层次结构,并结合弹(箭)上计算机,对故障进行实时在线检测和处理,以达到减小或消除瞬时故障对控制系统的影响的目的。     

相关噪声背景下相干信源DOA估计算法研究

根据信号和噪声的非圆对称特性,利用除第一个阵元外的其它阵元接收数据的共轭信息,对原阵列进行有效地扩展,提出了一种相关噪声背景下相干信源波达方向（DOA）估计的新算法。由于对阵列进行了虚拟扩展并运用斜投影算法将非相干信源与相干信源分开分辨,因此该算法具有很强的信源过载能力及阵元节省能力,在一定程度上提高了空间分辨率DOA估计的性能,并可对消空间具有非圆对称性的相关噪声,适用于低信噪比环境。仿真结果证明了算法理论的正确性和有效性。     

The gas pixel detector as a solar X-ray polarimeter and imager

The Sun is the nearest astrophysical source with a very intense emission in the X-ray band. The study of energetic events, such as solar flares, can help us to understand the behaviour of the magnetic field of our star. There are in the literature numerous studies published about polarization predictions, for a wide range of solar flares models involving the emission from thermal and/or non-thermal processes, but observations in the X-ray band have never been exhaustive.The gas pixel detector (GPD) was designed to achieve X-ray polarimetric measurements as well as X-ray images for far astrophysical sources. Here we present the possibility to employ this instrument for the observation of our Sun in the X-ray band.