Designing method of acceleration and deceleration control schedule for variable cycle engine

Studies show that different geometries of a Variable Cycle Engine (VCE) can be adjusted during the transient stage of the engine operation to improve the engine performance. However, this improvement increases the complexity of the acceleration and deceleration control schedule. In order to resolve this problem, the Transient-state Reverse Method (TRM) is established in the present study based on the Steady-state Reverse Method (SRM) and the Virtual Power Extraction Method (VPEM). The state factors in the component-based engine performance models are replaced by variable geometry parameters to establish the TRM for a double bypass VCE. Obtained results are compared with the conventional component-based model from different aspects, including the accuracy and the convergence rate. The TRM is then employed to optimize the control schedule of a VCE. Obtained results show that the accuracy and the convergence rate of the proposed method are consistent with that of the conventional model. On the other hand, it is found that the new-model-optimized control schedules reduce the acceleration and deceleration time by 45% and 54%, respectively. Meanwhile, the surge margin of compressors, fuel–air ratio and the turbine inlet temperature maintained are within the acceptable criteria. It is concluded that the proposed TRM is a powerful method to design the acceleration and deceleration control schedule of the VCE.     

金属加筋薄壁圆台结构二级布局优化设计方法

提出了一种金属加筋薄壁圆台结构的二级布局 优化方法。该方法首先采用试验设计选取结构布局变量的样本点,然后对每个样本点相应的 加筋薄壁结构进行强度和稳定性约束下的尺寸优化,获得对应的目标响应值;其后用布局变 量样本点和对应的响应面构造Kriging近似模型;最后用遗传算法对近似模型进行优化,得 到了加筋薄壁圆台的最优解。算例结果表明,该方法简单且优化效率高。     

复杂终端区进场交通流优化排序方法研究

为提高终端区时空资源利用率,增强空中交通 运行效率,研究了复杂终端区进场交通流优化排序问题。通过深入剖析终端区进场定位点、 航路航线、多跑道系统等资源运行特性,综合考虑尾流间隔、移交间隔、多跑道运行间隔等 各类约束限制,以及最小化航班延误时间、最大化跑道运行容量、最小化终端区飞行时间等 优化目标,建立了复杂终端区进场交通流优化排序模型,并采用带精英策略的非支配排序遗 传算法对所建模型进行求解。选取上海多机场组成的复杂终端区进行实例验证,仿真实验表 明提出的优化方法相比先到先服务方法(First come first serve,FCFS),航班总延误时间 减少20.7%,终端区等待时间减少60.7%,终端区进场交通流运行效率得到显著提升。     

资源约束突变的航天器观测快速重调度优化算法

针对航天器对地观测调度中资源约束发生突变的情况,提出了一种基于蚁群算法的启发式重调度算法。首先对重调度过程中的资源约束进行分析,给出了资源约束发生变化的重调度模型。然后,结合原调度优化结果,给出重调度任务集合更新方法,对任务集合进行剪裁。最终,基于最大限度利用原调度方案信息的思想,结合任务集合更新及优先级等启发式信息,给出了一种改进的重调度优化算法。数值计算结果表明,所设计的算法可以快速有效的提高重调度过程的收益。     

卫星姿控系统可重构性综合评价方法研究

针对可重构性评价需考虑系统资源、性能等多约束条件的问题,以卫星混合执行机构姿控系统为研究对象,建立了基于组合赋权法的卫星可重构性综合评价方法。首先,综合分析影响卫星姿控系统的指标因素,结合系统可重构性度量指标构建了综合评价指标体系;然后利用层次分析法和熵权法分别得到权重初值,以最小二乘法为工具建立确定具有主客观意义的优化组合评价权重;最后采用欧几里德距离为测度,计算各方案距离正负理想点的相对接近度并以此作为评价准则。针对多方案系统配置实例进行了验证计算,结果表明利用基于组合赋权法的评价方法能有效地对卫星姿态控制系统可重构性进行综合评估,具有较好的应用价值。     

钻取式自动采样机构螺旋钻杆结构参数的多目标优化

分析了螺旋钻杆的输出月壤原理和输出月壤阻力（阻力矩）以及综合考虑了螺旋槽内月壤对钻杆驱动力矩的影响、螺旋升角的取值范围和钻杆的轴向钻进功率后建立了钻杆驱动力矩、轴向加载力及功耗的模型。利用该模型分析了钻杆外径、螺旋槽深、槽宽比及螺旋升角等结构参数对钻杆驱动力矩和轴向加载力的影响,获得了钻杆结构参数对钻杆驱动力矩和轴向加载力的影响规律。以钻杆质量和功耗最小为双优化目标,以钻杆外径、螺旋槽深、槽宽比及螺旋升角等结构参数为设计变量,基于遗传算法对钻杆结构参数进行了优化,优化后的功耗较优化前降低了31.8%,钻杆质量减小了23.3%。总体减少了钻探风险,可为钻取式自动采样机构的设计提供理论依据。     

An error analysis and optimization method for combined measurement with binocular vision

The accurate measurement of surfaces of large aviation components is vital for the assessment of manufacturing and assembly quality of such components. To satisfy the measurement requirement of large-size components, most current researches pay more attention to combined measurement methods utilizing different measuring instruments, but the related researches on error analysis and optimization methods are not taken enough attention. This paper proposes a combined laser-assisted measurement method with feature enhancement techniques, and it also develops an error propagation model of the main factors affecting the overall measurement error in detail. Firstly, the surface of a large-size component is measured by the measurement system at multiple stations. Secondly, a control point coordinate system is established as a bridge to unify all local measurement data into the global coordinate system. To improve the overall measurement accuracy, the pixel extraction error as a key factor causing the overall measurement error is analyzed in detail. Next, the error propagation model is established, and some optimization strategies of layout for minimizing measurement error and transformation error are researched. Finally, experiments are carried out to verify the effectiveness of the proposed method. The results show that the measurement error of the proposed method reaches 0.073% and 0.14% with a 1D standard ruler and a flat plate, respectively.     

天琴计划轨道构型长期漂移特性分析

为了实现天琴计划航天器轨道构型的长期稳定漂移并满足轨道构型的稳定性指标,文章应用优化算法搜索航天器初始最优瞬时轨道要素。建立考虑摄动情况下航天器轨道动力学模型,对导致等边三角形轨道构型发生长周期漂移的轨道要素进行了分析,并且将这些要素作为轨道设计的待优化参量,应用粒子群（ParticleSwarmOptimization,PSO）智能寻优算法进行优化,应用最终优化得到的轨道要素进行轨道构型仿真。仿真结果表明,在不进行轨道控制的情况下,4年内轨道构型呼吸角变化小于1.5°,臂长变化小于1500km,臂长变化速率小于10km/s,初步满足轨道构型的稳定性指标。     

新型非接触式径向C4D传感器优化设计

基于电容耦合式非接触电导检测(C4D)技术,设计研发了一种新型径向结构的非接触式电导测量传感器。该传感器利用串联谐振的原理,引入电感模块以消除耦合电容对测量的不利影响,扩大了测量范围,提高了测量灵敏度。同时,用仿真与实验相结合的方法对传感器的电极张角进行了优化研究。在5.0、7.5、9.1、10.2和12.0 mm 5种不同内径的管道中进行了电导测量实验,电导测量相对误差均不超过5%,实验结果表明,所设计的新型非接触式径向C~4D电导测量传感器是可行和有效的。     

交互式多模型粒子滤波优化重采样算法

针对标准交互式多模型粒子滤波(IMMPF)算法中存在粒子退化及多样性匮乏问题,提出了交互式多模型粒子滤波优化重采样(IMMPFOR)算法,利用线性优化理论改善模型中具有小权值的粒子精度。该算法的新颖性体现在给定量测信息条件下,利用线性优化方法及模型交互概率将每个模型中拥有小权值的粒子替换成新的粒子。新的粒子既包含本模型中粒子信息,又包含了本模型与其他模型交互后的粒子信息。目标跟踪的仿真结果证明:每个模型新产生的粒子集合可以准确地近似真实状态后验概率密度函数,系统的估计精度与标准IMMPF算法相比有较大提升。