The role of AVDR in linear cascade testing

Linear cascade testing plays an important role in the research and development of turbomachinery and is widely used over the world.The ideal cascade model of a turbomachinery blade row is two-dimensional.In actual linear cascade testing, the flow through the test section converges due to the development of the boundary layer and secondary flow along the sidewall surfaces of the test section.Axial velocity density ratio(AVDR) is adopted to account for the deviation of the tested cascade flow from the ideal 2D model.Among numerous published cascade works, the influence of AVDR on cascade performance is seen to be complicated with many affecting factors, such as those related to cascade/blade geometry and flow conditions.Also, controlling AVDR is limited by the facility capability.Furthermore, real blade-to-blade flow in turbomachines is usually associated with AVDR greater than unity due to limited span of blades between the hub and shroud such that cascade testing without reducing AVDR could be favored sometimes.All these facets add complexity and diversification to the matter.The current paper reviews previous studies and results on AVDR.Consolidated understanding on the role of AVDR and recommendations on how to deal with it in linear cascade testing are provided.      

转子叶片加工误差对1.5级跨声速压气机气动性能的影响

压气机叶片加工误差不可避免,将在一定程度上影响压气机的气动性能.为研究叶片加工误差对跨声速压气机气动性能的影响,以燃气轮机进口1.5级跨声速压气机为对象,通过三坐标测量跨声速转子叶片叶型数据,获得了加工误差分布特征;针对实测转子叶片,采用三维CFD数值模拟方法,研究了轮廓度、位置度和扭转角综合误差对压气机转子和级特性线...     

分数槽集中绕组永磁同步电机设计与分析

分数槽集中绕组永磁同步电机由于转矩密度高、弱磁性能好、齿槽转矩小和效率高等特点,广泛应用于航空航天、电动汽车等领域。本文研究了机载雷达伺服系统用分数槽集中绕组永磁同步电机,建立了电机的解析模型,分析了长径比、裂比、磁密系数等设计参数对电机性能的影响规律。结果表明,电机的输出转矩和质量分别与定子外径D3os,D2os成正比,绕组端部比重与长径比λ成反比,综合转矩密度和绕组端部比重两个因素,λ宜在0.2~0.4范围内选择。当定子裂比γ增加时,转矩密度先增大后减小,为使转矩密度最大,γ宜在0.6~0.8范围内选择。当磁密系数χ增加时,输出转矩先增大后减小,为使输出转矩最大,χ宜设计在1.75附近。基于理论分析和仿真计算,文中设计并加工了一台45槽38极分数槽集中绕组永磁同步电机,最后通过实验测试了其性能。     

限带白噪声随机过程的雨流幅值概率密度函数模型

对17种不同带宽系数的限带白噪声随机过程进行了雨流循环计数统计,提出了一个限带白噪声随机过程的雨流幅值概率密度函数(Probability density function,PDF)模型。该模型是Rayleigh分布和Weibull分布的线性组合,其中待定系数均为随机过程谱参数的函数。采用该模型对这17种随机过程的雨流幅值概率密度函数进行了公式拟合,探究了模型中待定参数与随机过程谱参数之间的关系,确定了模型表达式。对照随机过程的雨流计数统计结果,将该模型与Dirlik模型的预测精度进行了比较,结果表明该模型的预测效果优于Dirlik模型。     

针刺炭布/网胎复合织物的组分形态及性能研究

将T-300炭纤维平纹布和聚丙烯腈（PAN）预氧化纤维网胎预复合,接力层叠、针刺、炭化后制备了炭布/网胎复合织物.在分析复合织物组分形态的基础上,研究了针刺深度和针刺密度对复合织物性能的影响.研究结果表明,随针刺深度增大,复合织物密度增大,X-Y向和Z向拉伸强度均存在极值;随针刺密度增加,复合织物X-Y向拉伸强度下降,而复合织物密度和Z向拉伸强度则存在极值.     

Analysis of the ionosphere/plasmasphere electron content variability during strong geomagnetic storm

The ionosphere/plasmasphere electron content (PEC) variations during strong geomagnetic storms in November 2004 were estimated by combining of mid-latitude Kharkov incoherent scatter radar observations and GPS TEC data derived from global TEC maps. The comparison between two independent measurements was performed by analysis of the height-temporal distribution for specific location corresponding to the mid-latitudes of Europe. The percentage contribution of PEC to GPS TEC indicated the clear dependence from the time with maximal values (more than 70%) during night-time. During day-time the lesser values (30–45%) were observed for quiet geomagnetic conditions and rather high values of the PEC contribution to GPS TEC (up to 90%) were observed during strong negative storm. These changes can be explained by the competing effects of electric fields and winds, which tend to raise the layer to the region with lower loss rate and movement of the ionospheric plasma to the plasmasphere.     

非高斯随机振动的模拟方法

随机振动台根据功率谱密度（PSD,Power Spectral Density）生成的信号为高斯信号,而实际振动环境有时是非高斯的,因此随机振动实验常常无法准确模拟产品在真实振动环境下的失效情况。通过两个案例分别对均方根值（RMS,Root Mean Square）不随时间变化和随时间变化的非高斯随机振动进行了模拟方法研究。案例1利用Hermite多项式法对高斯信号进行了转换,在保证功率谱密度不变的同时得到了具有指定峭度的RMS不随时间变化的非高斯信号,但该方法对于输入的峭度有限制,当输入峭度大于10时,误差达到了20%。案例2利用一种新方法对实测的RMS随时间变化的非高斯振动进行了模拟,模拟后得到的非高斯信号和实测信号具有相同的功率谱密度、峭度以及概率分布,验证了新方法的准确性。     

基于双磁钢转子的大力矩飞轮用电机设计

针对卫星快速敏捷和大角度机动的需求,设计了一种基于双磁钢转子的大力矩飞轮用永磁电机。介绍了大力矩飞轮用电机的工作原理和结构构成,给出了主要尺寸的设计准则,并在Maxwell 环境下对双磁钢转子的永磁直流电动机进行了有限元分析。     

纹影干涉图的图像处理方法研究

本文利用计算机存贮量大、运算能力强的特点研究了一种分析纹影干涉图,计算密度场的图像算法。这套算法包括使用低通滤波技术消除干涉图背景中的高频噪声,使用 Hilditch 算法细化宽度多于一个像素的干涉条纹,使用模式识别方法提取干涉条纹的位移量,最后应用数值积分技术求解密度场的空间分布。这里研究的图像处理方法提高了纹影干涉图定量分析的精度、加快了实验结果的处理速度,给出了直观可靠的数值结果,是一种实用有效的图像算法。     

定数截尾试验下双参数指数寿命分布尺度参数的EB估计

本文讨论了在无替换定效截尾试验方案下,当产品寿命为双参数指数分布时,尺度参数(失效率)久的经验Bayes(简记EB)估计问题及其收敛速度。设在给定λ,μ下,产品寿命T服从双参数指数分布,其概率密度为 受试产品有n个,试验中前r个产品依次出现的失效时间为t_(1)≤t_(2)≤……≤t_(r)。令 则(x,y)为(μ,λ)的充分统计量。记(x,y)的联合边缘密度为f(x,y),若取二次损失函数,则λ的Bayes点估计为 利用密度函数及其偏导数的核估计,构造出λ的EB估计为 φ_(1n)(x,y)与φ_(1m)(x,y)的Bayes风险分别为 在一定的正则性条件下,我们证明了 这表明,λ的EB估计的收敛速度q可任意接近于1/2。