A new steering approach for VSCMGs with high precision

A new variable speed control moment gyro (VSCMG) steering law is proposed in order to achieve higher torque precision. The dynamics of VSCMGs is established, and two work modes are then designed according to command torque:control momentum gyro (CMG)/reaction wheel (RW) hybrid mode for the large torque case and RW single mode for the small. When working in the CMG/RW hybrid mode, the steering law deals with the gimbal dead-zone nonlinearity through compensation by RW sub-mode. This is in contrast to the conventional CMG singularity avoidance and wheel speed equalization, as well as the proof of definitely hyperbolic singular property of the CMG sub-mode. When working in the RW single mode, the motion of gimbals will be locked. Both the transition from CMG/RW hybrid mode to RW single mode and the reverse are studied. During the transition, wheel speed equalization and singularity avoidance of both the CMG and RW sub-modes are considered. A steering law for the RWs with locked gimbals is presented. It is shown by simulations that the VSCMGs with this new steering law could reach a better torque precision than the normal CMGs in the case of both large and small torques.     

叶尖粗糙度与倾角对光纤传感器输出特性影响

航空发动机涡轮叶片叶尖间隙变化影响发动机效率也蕴含丰富的发动机健康状态信息。实际叶尖间隙变化表现为3维变化,且叶尖表面受高温气流剥蚀等影响表面粗糙度发生变化。为探究其对光纤传感器测量叶尖间隙精度的影响,利用ZEMAX光学仿真软件分析了双圈同轴式光纤传感器在叶尖表面粗糙度变化和倾角变化影响下的输出特性,并搭建3维叶尖间隙静态标定平台对上述影响进行试验。结果表明:粗糙度和倾角增大均导致传感器灵敏度降低、零点位置后移。该结果为实现叶尖间隙变化的3维精确测量提供理论和试验依据。     

太阳同步轨道卫星光学特性

为了分析太阳同步轨道卫星的光学特性,对FY-1卫星的可见光和红外波段光学信号进行了仿真计算和模拟试验验证.通过对外部辐射及内部热源的分析,计算了卫星的温度场,采用随机起伏表面算法模拟表面覆盖材料外表面,通过阴影遮挡判断及双向反射分布函数(BRDF, Bi-directional Reflectance Distribution Function)模型计算卫星对外部辐射的反射特性,编程计算得到在可见光0.4~1.0μm和红外8~14 μm,14~16 μm波段下卫星的光学特性.结果表明红外辐射亮度与表面温度相关,8~14 μm最大约90 W/(m²·sr)、14~16 μm最大约20 W/(m²·sr).空间可见光辐射强度具有明显的镜面反射效应,卫星主体峰值2 200 W/sr.通过地面模拟测量空间目标的温度和红外辐射验证了温度及红外辐射仿真计算模型,可见光辐射强度仿真计算结果与地面模型卫星测量结果误差在20%以内.     

北斗/GNSS高精度时频终端测试方法探讨

基于虚拟仪器技术、网络技术和批量化测量技术,探讨北斗/GNSS高精度时频应用终端的测试手段;提出应用测试模块化和VXI/PXI/LXI总线技术的测试设计方案,该方案具有多路标准时间频率参考信号一致性设计和网络远程测试校准设计;同时,提出北斗/GNSS高精度时频终端测试校准系统的结构设计及其应用模式。这将能有效提高北斗/GNSS时频终端测试的集成化和智能化水平。     

自动阻抗调配器的校准技术探讨

自动阻抗调配器在微电子行业应用越来越广泛,但是目前国内还没有计量技术机构开展该类仪器的计量校准工作,本文介绍了其机械结构、工作原理,设计了控制模型,组建了校准系统,实现了主要参数矢量重复性、驻波比和插入损耗的校准工作。     

Digital signal processing and numerical analysis for radar in geophysical applications

Numerical solutions for signal processing are described in this work as a contribution to study of echo detection methods for ionospheric sounder design. The ionospheric sounder is a high frequency radar for geophysical applications. The main detection approach has been done by implementing the spread-spectrum techniques using coding methods to improve the radar’s range resolution by transmitting low power. Digital signal processing has been performed and the numerical methods were checked. An algorithm was proposed and its computational complexity was calculated.     

Systematic examination of the geomagnetic storm sudden commencement using multi resolution analysis

Geomagnetic storm sudden commencements (SSC) contain a wealth of information which is useful in many applications. It is important to point out that the SSCs used in this study are sampled at the rate of one sample per second in order get use of such high resolution data. In this paper, two studies are made on the geomagnetic SSC and an SSC onset automatic detection algorithm is introduced. The first study is about finding the relationship between the SSC rise time and its amplitude. Where it is found that there is a positive correlation between the amplitude and the amplitude gradient which is the amplitude divided by rise time. The second study is checking the spectrum of the SSC, starting from its onset until the end of the SSC rise time. This check had proved that the SSC contains both low and high frequency regions. This led us to introduce a new term, namely the SSC variation rate (VR). This VR is defined as the maximum rate of change of the field in the higher-frequency region of the SSC. These two studies were the guide to build an SSC automatic detector of one sample per second data using multi resolution analysis (MRA) of the discrete wavelet transform (DWT). The data set contains 134 SSCs with different VRs that were collected from the Circum-pan Pacific Magnetometer Network (CPMN). It is found that the standard deviation of the detection error is 41 s and that the average error is 9 s. From the calculated error distribution function, it is found that the detection error is within the range of −1.5 to 3 min. The detection process, as will be shown in the article, takes 70 s for one station and 3 min if the decision is related to the detection(s) of other stations. These results demonstrate the superiority of the proposed algorithm over other algorithms in which the detection error ranges between −8 and 5 min and the detection process takes 2–10 min. In addition to being faster and more accurate than the other algorithms, the proposed algorithm is the first algorithm that automatically detects the SSC onset times from high-resolution data unlike previous studies that focused on determining the SSC times automatically using one-minute resolution data.     

基于神经网络的维修保障流程影响度分析方法

针对维修保障能力的主要影响因素分析及其影响度的量化问题,以维修保障业务流程作为分析对象,通过建立业务流程参数与装备使用能力的关系函数,建立影响因素和影响度的分析方法,并给出影响程度、关键要素、关键影响要素以及综合影响度定义.以流程数量、效率和稳定性作为分析指标,利用MATLAB软件基于神经网络实现对关系函数的逼近求解,为装备制造企业提供确定关键流程和主要影响因素的系统实现.以某航空装备制造企业维修保障业务流程为例给出具体应用,与专家评价方法相比该方法可获得更为客观的分析结果.      

卫星编队对空间非合作目标测距相对导航精度分析

针对单颗卫星对空间非合作目标测距不能估计全部相对运动状态的问题,提出利用编队中多颗卫星同时测距相对导航。建立了相对运动状态估计的系统模型;推导了系统可观测矩阵;通过计算系统可观测度和采用无迹卡尔曼滤波（UKF）对目标相对运动状态进行估计,研究了观测矢量方向和数量与相对导航精度的关系。结果表明双星测距能估计全部相对运动状态,观测矢量夹角越大,相对导航精度越高,在编队尺寸远小于目标距离的前提下,多于两颗的卫星测距并不能明显提高相对导航精度。     

非接触检测大螺纹件的可行性

针对科研生产中大螺纹件检测费时费力、检测准确度不高的实际情况,提出以激光位移传感器作为非接触扫描测头,配以三坐标架框架及转台等附件,组建非接触检测大螺纹件的检测校准装置的方案。通过扫描螺纹牙型的实际轮廓,计算螺纹的综合参数,并与标准螺纹数据比对,判定螺纹的合格与否。同时,验证了该方法的可行性。