空间核电推进系统比质量优化建模及其木星探测应用分析

空间核电推进(Nuclear Electric Propulsion,NEP)系统是一种将核热能转换成电能,并驱动大功率电推力器而产生推力的革命性空间推进技术。和传统推进技术相比,NEP具有高比冲、大功率、长寿命等技术优势,非常适合未来大规模深空探测任务。基于NEP系统组成和小推力轨道理论,建立了以有效载荷为目标的NEP系统比质量优化模型。该模型能够解析NEP航天器的轨道运行时间、比质量、功率与有效载荷比的复杂耦合关系,为任务优化提供了计算依据。最后,利用该模型对NEP系统完成NASA "Juno号"航天任务进行了技术指标评估分析。计算表明,当NEP系统比质量达到4.8 kg/kWe时,其能将"Juno号"航天任务的地木转移时间由2 266 d缩短至665 d,有效载荷由160 kg提高到1 179 kg,极大地提高了航天器的探测能力,为任务方案的可行性论证和后续设计提供参考。     

航班旅客的二氧化碳补偿算法研究

研究了航空旅客的碳排放分摊问题,即碳补偿问题,通过算法说明按照业载分摊与按照总重分摊哪种适于旅客。二氧化碳排放数量与燃油消耗数量对应。以A320—200为例,计算说明了在标准情况下飞机燃油消耗数量与二氧化碳补偿的定量关系,从而确定碳补偿方案。在算法基础上,设计了通用计算程序,对输出结果进行了分析。     

光学遥感卫星杂散光扫描测试系统测控设计

文章介绍了一种光学遥感卫星杂散光扫描测试系统,用于发射前整星条件下对光学载荷杂散光抑制能力的模拟、分析及验证测试。根据卫星的杂散光测试特点,对杂散光扫描测试系统进行了安全性、有序性、有效性、准确性、重现性、完整性和通信控制等测控设计,并推导了光束扫描子系统的控制方程。对杂散光扫描系统的控制准确性进行检测,结果表明:光束扫描位置精度优于10 mm,方位角精度优于0.2°,俯仰角精度优于0.1°。     

中国首次火星探测工程有效载荷总体设计

简要介绍了中国首次火星探测工程的科学目标与有效载荷的配置,有效载荷分系统的总体技术方案,包括有效载荷供配电、遥测遥控、科学数据处理、在轨自主运控,以及有效载荷分系统在轨基本工作流程安排。针对火星环绕器有效载荷功能复杂、安装位置分散等特点,配置了独立的载荷控制器设备,通过总线网络将有效载荷分系统组成有机整体,实现与环绕器平台的统一电接口。针对火星车有效载荷在重量、体积、能源等方面的严格限制,通过最大限度地将各有效载荷主控电子学控制单元集成于一台载荷控制器设备中,实现了对有效载荷的集中控制和管理。     

基于嵌套饱和的四旋翼无人机吊挂负载控制器设计

针对四旋翼无人机吊挂负载系统飞行中的摆角抑制问题,考虑过快位置机动容易引起吊挂大幅度摆动,提出了一种基于嵌套饱和的四旋翼无人机吊挂负载控制器。首先,利用扩张状态观测器估计干扰,设计具有强抗扰能力的垂直位置控制器;其次,基于简化模型通过构建李雅普诺夫函数,设计控制摆角收敛的抑摆控制器;最后,基于一种嵌套饱和控制方法,设计了限制机动速度的水平位置控制器。与已有控制方法的仿真对比表明,该控制器不但能保证四旋翼无人机吊挂负载系统稳定飞行,还能在大幅度位置机动指令下有效减小最大摆幅。     

一种运载火箭时变结构模态参数辨识的确定性演化方法

针对运载火箭的时变结构模态参数辨识问题进行研究,基于时变自回归滑动平均(TARMA)模型,提出一种时变结构模态参数辨识的确定性演化方法。该方法利用小波基函数的良好局部函数拟合能力,将墨西哥帽小波函数作为TARMA模型时变系数的空间基底,构建了基于小波函数的泛函序列时变自回归滑动平均(FS-TARMA)模型,并发展了两步最小二乘估计方法,实现了时变系数的解耦估计。通过有限单元法,建立了阿里安V号芯级运载火箭时变有限元模型,对所提辨识方法进行了验证,结果表明:墨西哥帽小波基FS-TARMA方法能够有效地辨识系统的时变模态参数;与传统傅里叶基FS-TARMA方法相比,具有更好的辨识精度,并且能够准确地反映出模态局部细节特征。     

Modeling and simulation of a time-varying inertia aircraft in aerial refueling

Studied in this paper is dynamic modeling and simulation application of the receiver aircraft with the time-varying mass and inertia property in an integrated simulation environment which includes two other significant factors, i.e., a hose–drogue assembly dynamic model with the variable-length property and the wind effect due to the tanker's trailing vortices. By extending equations of motion of a fixed weight aircraft derived by Lewis et al., a new set of equations of motion for a receiver in aerial refueling is derived. The equations include the time-varying mass and inertia property due to fuel transfer and the fuel consumption by engines, and the fuel tanks have a rectangle shape rather than a mass point. They are derived in terms of the translational and rotational position and velocity of the receiver with respect to an inertial reference frame. A linear quadratic regulator(LQR) controller is designed based on a group of linearized equations under the initial receiver mass condition. The equations of motion of the receiver with a LQR controller are implemented in the integrated simulation environment for autonomous approaching and station-keeping of the receiver in simulations.     

高空长航时无人机任务设备/飞行综合控制技术

首先对无人机和任务设备的发展作了简要介绍，并介绍了高空长航时无人侦察机的国内外发展现状，着重对高空长航时无人侦察机任务设备／飞行综合控制中综合控制、运动补偿、组合导航、三维定位和目标识别等关键技术进行了分析，说明了目前对高空长航时无人机的任务设备／飞行综合控制进行研究的必要性和可行性。     

Invariant and energy analysis of an axially retracting beam

The mechanism of a retracting cantilevered beam has been investigated by the invariant and energy-based analysis. The time-varying parameter partial differential equation governing the transverse vibrations of a beam with retracting motion is derived based on the momentum theorem. The assumed-mode method is used to truncate the governing partial differential equation into a set of ordinary differential equations (ODEs) with time-dependent coefficients. It is found that if the order of truncation is not less than the order of the initial conditions, the assumed-mode method can yield accurate results. The energy transfers among assumed modes are discussed during retrac-tion. The total energy varying with time has been investigated by numerical and analytical methods, and the results have good agreement with each other. For the transverse vibrations of the axially retracting beam, the adiabatic invariant is derived by both the averaging method and the Bessel function method.     

Two new multi-phase reliability growth models from the perspective of time between failures and their applications

Aviation products would go through a multi-phase improvement in reliability performance during the research and development process. In the literature, most of the existing reliability growth models assume a constant failure intensity in each test phase, which inevitably limits the scope of the application. To address this problem, we propose two new models considering time-varying failure intensity in each stage. The proposed models borrow the idea from the accelerated failure-time models. It is assumed that time between failures follow the log-location-scale distribution and the scale parameters in each phase do not change, which forms the basis for integrating the data from all test stages. For the test-find-test scenario, an improvement factor is introduced to construct the relationship between two successive location parameters. Whereas for the test-fix-test scenario, the instantaneous cumulative time between failures is assumed to be consistent with Duane model and derive the formulation of location parameter. Likelihood ratio test is further utilized to test whether the assumption of constant failure intensity in each phase is suitable. Several applications with real reliability growth data show that the assumptions are reasonable and the proposed models outperform the existing models.