论火工装置的抽样试验与可靠性评估问题

对航天器用的火工装置,提出运用序贯检验方法制定其抽样试验方案以及运用贝叶斯方法评定其可靠性的建议。算例表明,文章所提建议适用于解决小子样成败型产品的可靠性设计、试验和验证等问题,对节省产品研制经费有重要意义。     

数控系统在S域和P域的分析设计方法

讨论一种典型的采样控制系统──直接数字控制（ＤＤＣ）系统（简称数控系统）在Ｓ域和Ｐ域的分析设计方法。根据采样控制系统理论,从数控系统在Ｚ平面的稳定性判据出发,利用ｔｕｓｔｉｎ变换（Ｐ变换）,通过Ｚ平面、Ｓ平面和Ｐ平面之间的映像关系,导出数控系统在Ｓ域和Ｐ域的稳定性判据,进而提出了数控系统在Ｓ域和Ｐ域的分析设计方法,并详细说明了这两种设计方法的具体方法与步骤。     

数据收集系统下行频偏校准与点频值计算

风云二号（ＦＹ－２）卫星在轨运行期间本振源必定产生一定的频率偏移,这就影响了数据收集平台接收系统（ＤＣＰＲ）相应于各种平台的报文锁相环路的频率捕获范围,严重时将无法解调出各种平台收集的气象数据,整个系统也将无法正常工作。为解决上述问题,介绍了ＤＣＰＲ下行频偏校准及点频值计算的方法。通过ＦＹ－２卫星在轨测试表明,在随机干扰比较严重的情况下,ＤＣＰＲ对各种平台报文接收解调的成功率优于９８％,取得了令人满意的结果。     

太赫兹脉冲计量技术

太赫兹(以下简称THz)波位于微波到红外光学的过渡区域,具有重要的学术价值,在民用和国防等领域有着广泛的应用。高速器件产生或传输的超快脉冲宽度已达皮秒量级,带宽已进入太赫兹频段。传统技术和方法无法解决此类器件的校准问题,而结合光电技术的时域电光取样(EOS)技术则为太赫兹脉冲计量提供了有效的手段,本文对此类新技术进行了全面的概述。     

离心机精度对加速度计二次项标定精度的影响

离心机是标定高精度加速度计二次项系数(k2)的主要设备之一,其精度水平对k2标定精度具有重要影响。为揭示这种影响规律,指导测试设计,在常用的加速度计多项式模型基础上,建立了k2标定精度与离心机精度之间的数学模型,并利用MATLAB仿真。仿真结果表明,k2标定精度受离心机精度及其输出加速度幅度共同影响。在给定离心机精度的情况下,需要根据k2精度目标来设计离心机输出加速度范围,以免影响测试结果。     

Relevant experience learning: A deep reinforcement learning method for UAV autonomous motion planning in complex unknown environments

Unmanned Aerial Vehicles (UAVs) play a vital role in military warfare. In a variety of battlefield mission scenarios, UAVs are required to safely fly to designated locations without human intervention. Therefore, finding a suitable method to solve the UAV Autonomous Motion Planning (AMP) problem can improve the success rate of UAV missions to a certain extent. In recent years, many studies have used Deep Reinforcement Learning (DRL) methods to address the AMP problem and have achieved good results. From the perspective of sampling, this paper designs a sampling method with double-screening, combines it with the Deep Deterministic Policy Gradient (DDPG) algorithm, and proposes the Relevant Experience Learning-DDPG (REL-DDPG) algorithm. The REL-DDPG algorithm uses a Prioritized Experience Replay (PER) mechanism to break the correlation of continuous experiences in the experience pool, finds the experiences most similar to the current state to learn according to the theory in human education, and expands the influence of the learning process on action selection at the current state. All experiments are applied in a complex unknown simulation environment constructed based on the parameters of a real UAV. The training experiments show that REL-DDPG improves the convergence speed and the convergence result compared to the state-of-the-art DDPG algorithm, while the testing experiments show the applicability of the algorithm and investigate the performance under different parameter conditions.     

一种校准空间蓄电池在不同加速度状态下电特性的装置CSCD

在飞行器发射升空之前,需对空间蓄电池进行一系列的测试。而地球上的环境和在太空中的环境存在很大的不同,尤其是太空的失重环境,在地球上很难长时间的模拟,以达到测试的目的。这样在地面上的测试数据可能与实际工作所得有所偏差。针对这种情况,文章提出了一种校准空间蓄电池在不同加速状态下电特性的装置。     

RCS测试系统几何量参数综合校准技术研究

本文针对RCS测试系统的计量需求,阐述了RCS测试系统几何量参数校准技术研究情况。围绕雷达反射面型面参数、设备空间几何位置参数、定标体几何参数的有限目标开展了校准技术研究,研制了RCS测试系统的几何参数综合校准系统,并在国内几个典型的RCS测试系统进行了应用验证,初步建立了RCS测试系统几何量参数量值溯源体系,为国内RCS测试系统的量值统一、数据准确打下了坚实的技术基础。     

一种阵列天线逐通道相关在线标校法

由于发送端和接收端时钟的不一致性,导致低信噪比下阵列天线卫星移动通信的逐通道相关标校有很大的难度。在考虑易实现性和简易性基础上,提出了一种可以解决低信噪比下通道校正的多周期长时累积方法。该校准信号为由地面标校站产生的BPSK调制扩频信号,可以减少卫星设计的复杂度,且在不中断用户数据传输的基础上实现在线标校。该方法通过对接收信号打标、速率匹配等措施来解决收发时钟不一致导致的码偏和频偏问题。研究结果可以为阵列天线卫星通信技术提供支持。     

星间链路发射机时延零值的数字标定算法

The traditional absolute calibration based on oscilloscopic observation is not suitable for crosslink transmitter. A new calibration algorithm is developed by using a digital signal processing technique. The output signal of crosslink transmitter and the pulse per second signal are sampled in synchronization. At first, the delay reference is determined according to straight line fitting for the signal level stepping segment. The sampling data of crosslink transmitting signal is decimated and then phase acquisition processing is made to determine the initial synchronization point. A fine search for the start of the pseudo random code has been processed between front and rear of the initial synchronization point. Finally, the transmitter delay can be obtained according to the sampling frequency and the calibration delay of the test cable and attenuator. Compared with the oscilloscopic observation method, the analysis and test results show that the proposed technique has overcome the faults caused by whole chip ambiguity and the calibration accuracy can be improved by an order of magnitude.