舰载机着舰减震新技术研究

 在航空母舰上引入降落区的概念,考虑航空母舰的运动模型,建立了舰载机在该降落区上降落时的简化分析模型;推导出了基于该分析模型的运动微分方程及相关参数的表达式,采用数值分析方法解出飞机垂直撞击舰面降落区这一过程的动态响应,给出机身载荷-时间历程曲线和舰面垂支反力-时间历程曲线等。与原模型分析结果相比,机身受载和舰面垂直反力峰值减小分别37.3％和37.2％,有效地减小了舰载机着舰的冲击载荷。     

飞机综合航电系统总体设计综合评估方法

 航空电子系统的费用 效能是飞机总体系统效能的重要组成部分,也是降低飞机寿命周期费用的关键之一。在航空电子系统的总体设计阶段,传统的系统评估和优化方法主要针对的是独立子系统/设备的费用或效能指标。综合航电系统设计方案的费用 效能重要指标包括：可支付性、构型能力、任务能力、可靠性、维修性、测试性和技术风险,以组合的方式获得了相应的综合评估准则,给出了计算公式。以某新研航电系统作为实例演示了综合评估方法的实施情况,演示的重点集中于总体设计方案的可视化量化评估分析。该综合评估方法已显示出其在实际工程设计中的可行性和应用价值。     

运用低自由度协同优化的机翼结构气动多学科设计优化

 为了解决协同优化方法(CO)协调困难和计算量过大的问题,提出了低自由度协同优化方法(LDFCO)。LDFCO的系统级优化通过调整共享设计变量和辅助设计变量,使系统目标最优,并满足一致性约束条件。子系统优化通过调整局部设计变量,使子系统目标最优,并满足局部约束条件。子系统目标有2种形式：最小化本子系统的一致性约束函数和直接与系统目标有关的状态变量的加权和,或最小化一种不同于前者的一致性约束函数。着重研究了如何利用常规LDFCO/V1和基于代理模型的LDFCO/V1求解机翼的气动/结构多学科设计优化问题,并与CO方法进行了对比,结果表明常规LDFCO/V1和基于代理模型的LDFCO/V1都能成功地应用到机翼的多学科设计优化中,验证了LDFCO/V1的可行性和有效性。     

近地小推力转移轨道的加权组合制导策略

 研究了近地小推力转移轨道的制导问题,给出了一种基于局部最优控制律的自主制导算法。推导出了各改进春分点根数对应的局部最优控制律;通过最优推力分配和目标偏差两个策略,对各局部最优控制律进行动态加权组合,从而有效减少了制导律的设计参数。在此基础上,针对燃料最省转移轨道,定义了一种新的发动机开关函数。采用遗传/逐次二次规划混合优化算法计算了最优制导参数。与传统算法相比,该制导算法是一种闭环制导算法,能够实现飞行器的自主制导,并且制导过程中无需对制导参数进行更新。以地球低轨到高轨的小推力转移为例,采用该方法分别求解了时间和燃料最省转移问题,并与传统算法进行了比较分析。数值结果验证了该算法的有效性。     

自动测试系统适配器自动设计技术

 针对当前自动测试系统（ATS）适配器设计中存在的“自动化程度较低、缺乏通用性”的不足,开发了ATS通用适配器自动设计技术。建立了一整套通用适配器自动设计流程,在依次完成通用端口设计、UUT测点资源匹配、适配器开关网络设计、相关工程设计后即可实现自动设计一个通用适配器的目的。以某机载通讯设备自动测试系统为例,采用该技术可缩短ATS适配器开发周期至原来的1/3,降低开发成本,提高设计的标准化、通用化程度,适配器需要量由5个减为1个。     

Simulation and Analysis of Crashworthiness of Fuel Tank for Helicopters

Crashworthiness requirement of fuel tanks is one of the important requirements in helicopter designs. The relations among the protection frame, textile layer and rubber layer of the fuel tank are introduced. Two appropriate FE models are established, one is for an uncovered helicopter fuel tank without protection frame, and the other is for fuel tank with protection frame. The dynamic responses of the two types of fuel tanks impinging on the ground with velocities of 17.3 m/s are numerically simulated for the purpose of analyzing energy-absorbing capabilities of the textile layer and protection frame. The feasibility of the current crashworthiness design of the fuel tank is examined though comparing the dynamic response behaviors of the two fuel tanks.     

Advances and challenges on springback control for creep age forming of aluminum alloy

Creep age forming(CAF) is an advanced forming technology that combines creep deformation and age hardening processes. When compared with the conventional forming technologies including roll bending and shot-peen forming, CAF has many advantages of low residual stress,excellent dimensional stability, good service performance and short production cycle. It is an optimal technique for precise manufacturing for shape and properties of large-scale complicated thinwalled components of light-weight and...     

Convex optimization of asteroid landing trajectories driven by solar radiation pressure

High-area/mass ratio landers driven by Solar Radiation Pressure(SRP) have potential applications for future asteroid landing missions. This paper develops a new convex optimization-based method for planning trajectories driven by SRP. A Minimum Landing Error(MLE) control problem is formulated to enable planning SRP-controlled trajectories with different flight times. It is transformed into Second Order Cone Programming(SOCP) successfully by a series of different convexification technologies. A t...     

Neural Network aided PMSM multi-objective design and optimization for more-electric aircraft applications

This study uses the Neural Network(NN) technique to optimize design of surfacemounted Permanent Magnet Synchronous Motors(PMSMs) for More-Electric Aircraft(MEA)applications. The key role of NN is to provide dedicated correction factors for the analytical PMSM mass and loss estimation within the entire design space. Based on that, a globally optimal design can be quickly obtained. Matching the analytical estimation with Finite-Element Analysis(FEA) is the main research target of training the NN. ...     

单目视觉三维运动位姿测量方法研究

针对基于点特征的单目视觉位姿测量,研究了一种基于不共面5个编码特征点的单目视觉解算算法,利用大靶面高分辨率相机采集运动物体姿态图像,利用目标物体上编码特征点间的几何约束关系,通过正交迭代解算算法完成目标物体的位姿测量。实验结果表明：位移测量不确定度优于0.5mm,姿态测量不确定度优于0.05°,可满足航空航天领域试验测量要求。