纳米孔硅质绝热材料

介绍了纳米孔硅质绝热材料的绝热机理及发展概况，同时简要介绍了其生产工艺，并对其主要物化性能、热学性能及其它应用特点作了较为详细的说明。     

CubeSats detumbling using only embedded asymmetric magnetorquers

After deployment from a rocket, a CubeSat is detumbled using magnetorquer rods bringing the norm to the point where the reaction wheels take over to reduce the angular velocity to null. Therefore, utilizing reaction wheels for satellite detumbling at higher initial velocities is vital but they are heavy and occupy significant space on a spacecraft having challenging control. To address this challenge, this paper features a disruptive approach that conducts the control only by the PCB-integrated magnetorquers with various geometries using a diverse non-unity track width ratio. The trace widths are parametrized such that the optimal torque to power dissipation ratio is investigated. The optimizations are then simulated for various geometric distributions and validated through comprehensive measurement setups that establish a framework for selecting the best-case coil configuration according to mission requirements. The detumbling rates of multiple asymmetric coil configurations are compared with the embedded designs in published literature and state of the art. It is found that the proposed asymmetric embedded magnetorquers can detumble the vehicle at high initial angular velocities. Lastly, the simulation results of thermal analysis are validated for selecting the application-specific optimal coils configuration. At the end, the proposed system is compared with the embedded magnetorquers available in the literature and commercial attitude control systems.     

Experimental study on dynamic behavior of mechanically pumped two-phase loop with a novel accumulator in simulated space environment

Mechanically pumped two-phase loop (MPTL) which is a prominent two-phase heat transfer technology presents a promising prospect in thermal control for space payload. However, transient behavior of MPTL caused by phase-change and heat sources load-on/off in simulated space environment is rarely reported. In the present study, one MPTL setup was designed and constructed, and experimentally studied. Particularly, a novel two-phase thermally-controlled accumulator integrated with passive cooling measure and three capillary structures was designed as the temperature-control device. Dynamic behavior of the start-up, temperature control, and temperature adjustment were monitored; meanwhile, thermodynamic behavior within the proposed accumulator, the operating behavior as well as the heat and mass transfer behavior between the main loop and the accumulator were revealed. The results show that the fluid management function of the capillary structures for the novel accumulator is verified. The working point of the MPTL system can be adjusted by changing the temperature control point of the accumulator and it is little influenced by external heat flux and heat sources on/off. Pressure-drop oscillations which are manifested as fluctuations of temperature and pressure can be observed after phase changing due to the compressible volume within the accumulator and the negative-slope portion of the internal pressure.     

Dynamic thermal coupling modeling and analysis of wet electro-hydrostatic actuator

The electro-hydrostatic actuator(EHA) used in more electric aircraft(MEA) has been extensively studied due to its advantages of high reliability and high integration. However, this high integration results in a small heat dissipation area, leading to high-temperature problems. Generally,to reduce the temperature, a wet cooling method of using the pump leakage oil to cool the motor is adopted, which can also increase the difficulty of accurately predicting the system temperature in the early desi...     

复合材料气瓶热防护材料隔热性能试验研究

以复合材料气瓶热防护材料的耐高温及隔热性能为研究对象，通过真空舱模拟上面级飞行段的真空环境，采用石英灯阵模拟热源，对两种热防护方案开展真空热试验，分析了不同材料（组合）、多层隔热组件不同单元的隔热性能及其差异产生的原因。结果表明两种防热方案都可使气瓶壁面温度满足不超过70 ℃的温度要求，其中“柔性隔热毡+中温多层”组合防热结构的耐温和隔热性能更优，并通过理论计算与试验值对比验证了热仿真计算中的不确定性，试验结果可为后续型号防热设计提供参考。     

CFRP蜂窝夹层结构板埋件集群区域的热应力失效模式分析及补强设计

航天结构中,蜂窝板常采用在内部镶嵌埋件的方式使其与其他部件连接.为了分析CFRP蜂窝夹层结构板埋件集群区域面板在温度应力作用下失效的原因,进行了失稳破坏应力理论计算和数值分析,由分析结果发现是面板失稳导致了结构破坏.提出了加厚面板和局部加强两种补强方法并分析了其可行性和效率,通过对比发现局部补强的方法更加可行和高效.最...     

Design and analysis of a novel hybrid cooling method of high-speed high-power permanent magnet assisted synchronous reluctance starter/generator in aviation applications

To improve the heat dissipation performance, this paper proposes a novel hybrid cooling method for high-speed high-power Permanent Magnet assisted Synchronous Reluctance Starter/Generator (PMaSynR S/G) in aerospace applications. The hybrid cooling structure with oil circulation in the housing, oil spray at winding ends and rotor end surface is firstly proposed for the PMaSynR S/G. Then the accurate loss calculation of the PMaSynR S/G is proposed, which includes air gap friction loss under oil spray cooling, copper loss, stator and rotor core loss, permanent magnet eddy current loss and bearing loss. The parameter sensitivity analysis of the hybrid cooling structure is proposed, while the equivalent thermal network model of the PMaSynR S/G is established considering the uneven spraying at the winding ends. Finally, the effectiveness of the proposed hybrid cooling method is demonstrated on a 40 kW/24000 r/min PMaSynR S/G experimental platform.     

Selective thermal emission and infrared camouflage based on layered media

Infrared camouflage based on artificial thermal metasurfaces has recently attracted significant attention. By eliminating thermal radiation differences between the object and the background, it is possible to hide a given object from infrared detection. Infrared camouflage is an important element that increases the survivability of aircraft and missiles, by reducing target susceptibility to infrared guided threats. Herein, a simple and practicable design is theoretically presented based on a multilayer film for infrared stealth, with distinctive advantages of scalability, flexible fabrication, and structural simplicity. The multilayer medium consists of silicon substrate, carbon layer and zinc sulfide film, the optical properties of which are determined by transfer matrix method. By locally changing the thickness of the coating film, the spatial tunability and continuity in thermal emission are demonstrated. A continuous change of emissive power is further obtained and consequently implemented to achieve thermal camouflage functionality. In addition, other functionalities, like thermal illusion and thermal coding, are demonstrated by thickness-engineered multilayer films.     

基于气凝胶的防隔热一体化材料研究进展北大核心CSCD

新型高速飞行器的快速发展对热防护系统提出了更高要求,基于气凝胶的防隔热一体化材料对提升热防护系统的防隔热性能和结构效率有重要意义。本文基于防热层材料的不同,分类概述了基于气凝胶的防隔热一体化材料的研究进展、结构形式和性能特点,并简要阐述未来防隔热一体化材料发展需要解决的问题。     

蜂窝增强低密度硅基烧蚀防热材料性能

高速再入飞行器通常采用烧蚀防热材料作为外表面大面积的热防护材料。本文对两种蜂窝增强低密度硅基烧蚀防热材料的力学性能、热物理性能和烧蚀性能进行了测试,并结合试验结果对烧蚀机理进行了研究分析。结果表明,材料的密度越高、拉伸强度就越高,但拉伸模量相近;两种材料的隔热性能参数都较低。两种材料在不同热流密度条件下的电弧风洞烧蚀后退速率都较低,在部分烧蚀条件下有轻微膨胀。两种材料的烧蚀背温都较低,烧蚀表面形貌良好,能满足设计指标要求,是一种适用范围较广的烧蚀防热材料。