非对称波瓣下外扩张角对S型喷管气动热力性能影响

为了研究非对称波瓣下外扩张角对S型喷管气动热力性能的影响规律,以含非对称波瓣的S型喷管为研究对象,保持非对称波瓣长度、内扩张角、高宽比及上外扩张角不变,取定非对称波瓣下外扩张角依次为17.75°,22.75°,27.75°,32.75°,建立了一组具有不同下外扩张角的非对称波瓣S型喷管模型。通过数值求解Reynolds-Averaged Navier-Stokes(RANS)方程,得到了S型喷管气动热力性能随非对称波瓣下外扩张角的变化规律。研究结果表明:第一个弯道上游流场中,流向涡具有较强的混合能力,其核心区无量纲涡量值随非对称波瓣下外扩张角增大而逐渐增大;然而,在第一个弯道下游流场中,所有模型对应的流向涡核心区无量纲涡量值均已非常微弱。在S型喷管弯道区域,流道流向、截面形状发生巨大改变,使得内外涵流体混合效果显著提高,但混合流体的总压恢复系数却急剧下降。混合流体热混合效率值受下外扩张角影响不明显,但S型喷管下半部分内壁面温度随下外扩张角增大而逐渐上升。在S型喷管出口,下外扩张角为17.75°模型的总压恢复系数为0.9464,高于其他3种模型,并且相对于该截面上总压恢复系数最低值增加了0.55%。     

环氧类韧性耐烧蚀防热涂层的研制与表征

针对现有环氧类防热涂层韧性差、不耐烧蚀的缺点,设计了一种环氧类防热涂层--TR-48.测试了其基本性能及3-5个批次的典型性能,并与国外现有涂层进行了比较.结果证明:TR-48具有韧性好、强度高、耐烧蚀等特点;其中扭伸强度为8.7-11.2 MPa,伸长率为6.8%-12.2%,TG分析800℃残碳率为51%,800℃马弗炉烧蚀5 min残碳率为38%-47%.利用SEM、DSC表征了涂层的烧蚀过程,发现600-800℃存在烧结反应.利用液氧/煤油发动机和电弧风洞考核试验考核了涂层在高温、高速气流环境下的表现,结果表明该涂层具有较好的抗冲刷及防热性能.     

Sensitivity analyses of satellite propulsion components with their thermal modelling

Performing the sensitivity analyses of the contact conduction and the position of thermostat on the basis of the thermal model established, the study of thermal design is accomplished for the preparation of possible mechanical interface change of the satellite propulsion system depending on the satellite system design. A relatively simple thermal model is taken into consideration for the convenience of the analysis. A variety of the spacecraft bus voltages and the contact resistances are examined as well as the position of thermostat on propulsion components. As a consequence, even though the mechanical interface condition is changed on the same module, the successful thermal design could be achieved if we design the heater to have sufficiently large power with reference to the heritage value of contact resistance. Besides the reasonable performance on the thermal control is assured with the thermostat location errors, if the uncertainty in the position of thermostat is not quite large when assembling tank module.     

A comprehensive numerical model examining the thermal performance of airships

A novel computational model for analyzing the airship’s transient thermal performance under different environmental conditions was developed. Radiative heat transfer and natural convection inside the airship were modeled using the control volume method. The Semi-Implicit Method aiming at the Pressure-Linked Equations algorithm was adopted to solve the control equations. Such approach was able to take into account the solar irradiative heat flux, the infrared radiation at different locations, and the convection both inside and outside the airship. The simulation results, showing the detailed distributions of temperature and velocity on the envelope and inside the airship, were in good agreement with the experimental measurements. The influences of solar position and material radiative properties on temperature distribution, as well as natural convective flow inside airship, were further simulated and discussed.     

天宫一号目标飞行器氢镍蓄电池内部温度场仿真分析与验证

建立了氢镍蓄电池温度场热仿真模型,模拟氢镍蓄电池放电过程的温度。实测结果表明仿真计算值与实测结果一致性较佳,两者温差最大仅0．7℃,验证了热仿真模型的有效性。用该仿真模型对天宫一号（TG-1）目标飞行器40A·h氢镍蓄电池进行了热设计优化,根据优化结果研制了相应的电池。对电池内部温度的测试结果表明其内部最大温差约5℃,...     

柔性SiO2 气凝胶的制备

以甲基三乙氧基硅烷为前驱体,通过溶胶-凝胶法和超临界干燥制备块状柔性SiO2气凝胶.研究了前驱体浓度对材料化学组成、微观结构及柔韧性、热稳定性的影响.结果表明,甲基的存在降低了分子网络的交联密度,赋予了材料柔韧性.随着前驱体浓度降低,微观结构中颗粒堆积紧密程度下降,材料的柔韧性增强;同时分子中硅羟基增多,热稳定性提高.     

导热增强型相变材料温控试验

为满足高超声速飞行器舱内温度要求,提出了在舵轴热短路区域使用相变材料进行热耗散的方案.通过开展导热增强型相变材料温控试验,获得了不同试验方案对舵轴及周围金属壳体的降温效果.结果表明,导热增强型相变材料由于良好的导热性能,能够很好地发挥相变吸热能力,对降低舵轴热短路区域的局部高温具有显著效果;金属壳体内、外同时使用低温和中温相变装置,能够将舵轴周围金属壳体温度控制在允许工作温度范围内(150℃).本研究可为飞行器舵轴温控设计提供指导.     

Investigation of thermal protection system by forward-facing cavity and opposing jet combinatorial configuration

 This paper focuses on the usage of the forward-facing cavity and opposing jet combinatorial configuration as the thermal protection system (TPS) for hypersonic vehicles. A hemispherecone nose-tip with the combinatorial configuration is investigated numerically in hypersonic free stream. Some numerical results are validated by experiments. The flow field parameters, aerodynamic force and surface heat flux distribution are obtained. The influence of the opposing jet stagnation pressure on cooling efficiency of the combinatorial TPS is discussed. The detailed numerical results show that the aerodynamic heating is reduced remarkably by the combinatorial system. The recirculation region plays a pivotal role for the reduction of heat flux. The larger the stagnation pressure of opposing jet is, the more the heating reduction is. This kind of combinatorial system is suitable to be the TPS for the high-speed vehicles which need long-range and long time flight.     

置氢对TA15钛合金的变形及切削机理影响

为研究置氢处理对TA15钛合金变形及切削机理的影响,利用拉伸试验和车削测力试验对比不同置氢量下该合金的力学行为、切削力、锯齿切屑显微组织特征的差异.结果表明,高置氢量合金的屈强比减小,塑性提高,加工硬化严重;置氢促进了热软化效应的发生,氢含量越高,引起切削力下降的临界切削速度越低;同时从未置氢和低置氢组的锯齿切屑内能够...     

An archival study of extended X-ray emission from classical and recurrent novae

I discuss morphology and spectrum of the first resolved and detected classical nova shell in the X-rays – the remnant of GK Persei (1901). The existence of such a nebulosity brings about the possibility of other nova remnants emitting X-rays. I calculate that the X-ray luminosity should be about 10²⁶–10³³ ergs s⁻¹ on the onset of cooling for nova remnants. I have done an archival search on 250 classical and recurrent nova candidates using Chandra, XMM-Newton, ROSAT and ASCA databases. There is no significant extended emission detected which places an upper limit of F_x < × 10⁻¹² erg s⁻¹ cm⁻² (unabsorbed). Only exceptions are GK Per, RR Pic and DQ Her (all observed by Chandra ACIS-S and GK Per also by ROSAT HRI) where the latter two show marginal extended emission in the X-rays associated with emission knots (DQ Her) or an equatorial ring (RR Pic).