瞬态平面热源法热物理性能测量精度和适用范围的标定——常温下标准材料奥氏体不锈钢的热物理性能对比测试

瞬态平面热源法作为一种非稳态热物理性能测试技术，其测量范围、测量精度和试验参数的确定是正确评价和应用这种测试技术的前提条件。本文详细描述了采用瞬态平面热源法测量装置对热物理性能标准材料奥氏体不锈钢所进行的比对测试，并由此考察这种测试方法和测试装置的测量精度和适用范围。     

Solar Sources of Heliospheric Energetic Electron Events—Shocks or Flares?

Electrons with near-relativistic (E≳30 keV, NrR) and relativistic (E≳0.3 MeV) energies are often observed as discrete events in the inner heliosphere following solar transient activity. Several acceleration mechanisms have been proposed for the production of those electrons. One candidate is acceleration at MHD shocks driven by coronal mass ejections (CMEs) with speeds ≳1000 km s⁻¹. Many NrR electron events are temporally associated only with flares while others are associated with flares as well as with CMEs or with radio type II shock waves. Since CME onsets and associated flares are roughly simultaneous, distinguishing the sources of electron events is a serious challenge. On a phenomenological basis two classes of solar electron events were known several decades ago, but recent observations have presented a more complex picture. We review early and recent observational results to deduce different electron event classes and their viable acceleration mechanisms, defined broadly as shocks versus flares. The NrR and relativistic electrons are treated separately. Topics covered are: solar electron injection delays from flare impulsive phases; comparisons of electron intensities and spectra with flares, CMEs and accompanying solar energetic proton (SEP) events; multiple spacecraft observations; two-phase electron events; coronal flares; shock-associated (SA) events; electron spectral invariance; and solar electron intensity size distributions. This evidence suggests that CME-driven shocks are statistically the dominant acceleration mechanism of relativistic events, but most NrR electron events result from flares. Determining the solar origin of a given NrR or relativistic electron event remains a difficult proposition, and suggestions for future work are given.     

考虑气体扩散渗透的隔热材料瞬态隔热性能数值模拟

高超声速飞行器机动飞行时环境压力变化导致隔热材料沿厚度方向存在压力梯度,进而引起隔
热材料内气体的扩散渗透,影响隔热材料隔热性能。为研究气体扩散渗透对隔热材料隔热性能的影响,建立了
隔热材料内气体扩散渗透模型,采用罗斯兰德近似、有限体积法建立了隔热材料内扩散渗透及辐射导热传热计
算模型,对气体扩散渗透条件下的瞬态隔热性能进行了数值模拟。算例模拟结果表明:对2 cm 厚纳米隔热材
料,在外界气压为0. 1 MPa,绝热面为真空的状况下,当渗透率大于10-14 m2 时,气体扩散渗透开始影响隔热材
料内传热,导致隔热性能降低,气体黏性系数对气体扩散渗透有显著影响,随着黏性系数降低,气体扩散渗流现
象显著;衰减系数对绝热面温度响应有显著影响,随着衰减系数增大,绝热面温度响应显著降低。     

一种弹性低密度耐高温隔热涂层

针对固体火箭发动机实际使用的热环境要求,研制了一种弹性低密度耐高温隔热涂层,通过石英 灯辐射和电弧风洞试验对其进行了防热性能考核。该涂层密度为0. 62 g/ cm3,伸长率为25%,热导率为0． 18 W/ (m·K);在401℃时DSC 失重率仅为6. 6%;验证考核表明,采用1. 0 mm 涂层时,壳体与涂层界面温度最高 为77. 3℃,壳体背温度最高为44. 5℃。     

An equivalent ground thermal test method for single-phase fluid loop space radiator

Thermal vacuum test is widely used for the ground validation of spacecraft thermal control system. However, the conduction and convection can be simulated in normal ground pressure environment completely. By the employment of pumped fluid loops’ thermal control technology on spacecraft, conduction and convection become the main heat transfer behavior between radiator and inside cabin. As long as the heat transfer behavior between radiator and outer space can be equivalently simulated in normal pressure, the thermal vacuum test can be substituted by the normal ground pressure thermal test. In this paper, an equivalent normal pressure thermal test method for the spacecraft single-phase fluid loop radiator is proposed. The heat radiation between radiator and outer space has been equivalently simulated by combination of a group of refrigerators and thermal electrical cooler(TEC) array. By adjusting the heat rejection of each device, the relationship between heat flux and surface temperature of the radiator can be maintained. To verify this method,a validating system has been built up and the experiments have been carried out. The results indicate that the proposed equivalent ground thermal test method can simulate the heat rejection performance of radiator correctly and the temperature error between in-orbit theory value and experiment result of the radiator is less than 0.5 C, except for the equipment startup period. This provides a potential method for the thermal test of space systems especially for extra-large spacecraft which employs single-phase fluid loop radiator as thermal control approach.     

涡扇发动机轴对称引射收敛喷管红外辐射特性

数值研究了涡扇发动机轴对称引射收敛喷管的红外辐射特性.排气系统的流场计算采用商用数值模拟软件,红外辐射特性计算采用自主开发的软件NUAA-IR,计算分析了轴对称收敛喷管和引射收敛喷管在3~5μm波段红外辐射特性以及喷管内不同固体壁面在探测方向上的红外辐射贡献.结果表明:引射收敛喷管的红外抑制作用主要在于引射加强了尾喷流与环境大气的掺混,减小了尾喷流的长度,降低了燃气流的红外辐射;引射收敛喷管对喷管内固体壁面的遮挡以及降温作用很小,只在方位角为20°方向上对内涵壁面、外涵内壁等中低温壁面有效;引射收敛喷管的总积分辐射强度在方位角为0°~15°范围内与收敛喷管几乎相等,在其他方位角范围内均小于收敛喷管,且在方位角为40°方向上降低幅度达到最大,约为34%.      

航空发动机燃烧室出口高温热电偶校准技术

在高温校准风洞上,对测量航空发动机燃烧室出口温度气冷式和非气冷式这两种形式的高温热电偶进行校准,确定了高温热电偶的辐射修正系数.校准实验结果表明:高温热电偶的辐射误差随气流速度和压力的增加而降低,而且气流温度与航空发动机机匣壁面温度的温差越大,辐射误差也越大.比较两种结构形式的高温热电偶,非冷却式高温热电偶的测量误差比气冷式高温热电偶的相对较小.      

热障涂层氧化行为研究进展

综述了国内外粘接层氧化行为的研究进展,介绍了粘接层氧化动力学,热生长氧化物( TGO) 组

成、结构和形成规律,以及亚稳态Al2O3 向稳态Al2O3 的转变规律,分析了MCrAlY 粘接层及基体合金中的各种

元素对TGO 形貌和成分的影响,指出了深入研究粘接层氧化行为的方法以及热障涂层性能的改善措施。

     

高能合成煤油GN-1性能研究 --“液体火箭推进”专刊

结合火箭发动机工程应用环境,研究了GN-1煤油高温高压热物性、安全特性、传热结焦性能以及点火延迟性能,并和现役火箭煤油作了对比分析。采用商业仪器对GN-1煤油在最高200℃、最高压力25MPa范围内的密度、黏度、定压比热容、导热系数、表面张力进行了实验测量。在实验数据的基础上,依据基团贡献法、基于比容平移法则的P-R方程、摩擦理论、广义对应态原理分别对GN-1煤油在最高350℃、最高压力60MPa范围内的密度、黏度、定压比热容、导热系数、表面张力进行了理论计算,建立了GN-1煤油的密度方程、黏度方程、导热系数方程,并将方程的计算值与实验值进行了对比,计算偏差较小。对GN-1煤油和火箭煤油的安全性能进行对比研究,GN-1煤油的闪点为40℃,自燃温度为305℃,高于火箭煤油(225℃);燃点为47℃,低于火箭煤油(82℃),GN-1煤油的爆炸极限范围为0.44%-2.9%（40℃）。GN-1煤油和火箭煤油的急性经口毒性LD50＞5000mg/kg,均属于第五级化合物（实际无毒）。在入口压力10 MPa,流速10 m·s-1,内壁温480℃条件下,GN-1煤油的传热系数比火箭煤油提高14.4%,建立了传热准则方程。GN-1煤油出口油温220℃时试验段平均结焦速率是出口油温150℃时的4.43倍,GN-1煤油不锈钢材质管路中试验段平均结焦为高合管材质管路中的22.3%。在970K-1105K温度范围内,GN-1煤油的点火延迟时间为320μs-471μs,是火箭煤油的55.6%-69.3%。相关研究可对发动机可靠设计及应用提供重要参考。     

蓄热式太阳能热光伏-热推进双模系统换热特性数值模拟研究

本文通过三维数值模拟研究蓄热式太阳能热光伏-热推进双模系统的蓄/释热特性和推进性能。在蓄热式太阳能热推进系统工程模型的基础上,通过射线光学的光路分析验证了聚光器设计的合理性,并获得吸热腔壁面能量分布情况,进一步研究了相变蓄热过程的影响因素。基于场协同原理对热光伏再生冷却结构进行了优化设计,使热光伏具有较好的散热特性,提高发电功率;通过整机流动换热仿真,分析了工质流体在推进器内部的换热情况,计算结果表明,蓄热式热推进器具有达到734s比冲和0.9N推力的推进性能,以及能够满足日蚀区微小卫星的供电和推力需求。