低功率激光-TIG电弧复合焊接不锈钢熔深研究

建立了一套低功率YAG脉冲激光-TIG电弧复合热源焊接系统,并用本系统对不锈钢1Cr18Ni9Ti进行焊接.研究了3种热源作用下不锈钢的焊缝熔深.通过引入焊缝有效热输入概念,对复合热源影响熔深的机理进行了分析.     

An equivalent ground thermal test method for single-phase fluid loop space radiator

Thermal vacuum test is widely used for the ground validation of spacecraft thermal control system. However, the conduction and convection can be simulated in normal ground pressure environment completely. By the employment of pumped fluid loops’ thermal control technology on spacecraft, conduction and convection become the main heat transfer behavior between radiator and inside cabin. As long as the heat transfer behavior between radiator and outer space can be equivalently simulated in normal pressure, the thermal vacuum test can be substituted by the normal ground pressure thermal test. In this paper, an equivalent normal pressure thermal test method for the spacecraft single-phase fluid loop radiator is proposed. The heat radiation between radiator and outer space has been equivalently simulated by combination of a group of refrigerators and thermal electrical cooler(TEC) array. By adjusting the heat rejection of each device, the relationship between heat flux and surface temperature of the radiator can be maintained. To verify this method,a validating system has been built up and the experiments have been carried out. The results indicate that the proposed equivalent ground thermal test method can simulate the heat rejection performance of radiator correctly and the temperature error between in-orbit theory value and experiment result of the radiator is less than 0.5 C, except for the equipment startup period. This provides a potential method for the thermal test of space systems especially for extra-large spacecraft which employs single-phase fluid loop radiator as thermal control approach.     

基于区域的卷积神经网络在空对地车辆检测中的应用

针对传统空对地车辆检测算法在光照变换、场景变化时检测效果不佳的问题,提出了基于区域卷积神经网络Faster RCNN模型的空对地车辆检测方法,介绍了Faster RCNN模型以及模型训练过程.实验结果表明,基于Faster RCNN的空对地车辆检测方法是可行的,对不同光照和场景下的车辆检测可以取得较好的效果.     

航空表面涂层技术的应用与发展

航空表面涂层技术是航空制造技术的重要组成部分,涂层材料与涂层制造技术创新对提高航空零部件产品性能、降低能源消耗、提升产品可靠性及服役寿命具有重要意义.主要对涉及航空工业领域热障涂层、复合材料表面环境障涂层、高温可磨耗封严涂层及纳米涂层技术的应用现状与研究进展进行了阐述.     

高性能纤维增强树脂基复合材料3D打印及其应用探索

纤维增强树脂基复合材料具有优异的力学性能,能够实现轻质、高性能结构的制造,但传统的成型工艺过程复杂、成本高,难以实现纤维回收利用,限制了纤维增强树脂基复合材料的广泛应用.3D打印技术是一种新兴的零件成形工艺,将3D打印技术应用于纤维增强树脂基复合材料的制造,为实现复合材料低成本、绿色制造提供了可能性.综述了纤维增强树脂基复合材料3D打印技术研究的发展现状,提出了一种高性能连续纤维增强热塑性复合材料3D打印工艺及其回收再制造策略.     

基于深度图像的人体关节点定位方法

提出了一个基于深度图像的人体关节点定位的方法:首先将图像中的人体区域分割出来,然后利用随机森林分类器对逐个像素点进行分类,得到身体的各个部件并寻找关节点的位置。通过实验发现,本方法准确性较高并具有一定实时性。分类的准确率为 68%,相较 Kinect技术(40%)达到了较高的分类水平。预测人体关节点位置的平均时间为每帧 150ms,符合实用性要求。     

空间相机热平衡试验温度预测方法改进及应用

为实现对航天器热平衡试验平衡温度的预测,建立了热平衡温度预测的方程式,对影响预测结果的各参数进行了分析。首先,由节点网络法推导出平衡温度表达式,介绍了其基于非线性最小二乘法的求解过程,建立了平衡温度的迭代方程;其次,结合大量的试验数据,对影响迭代结果的3个因素进行了统计分析,并最终确定了各因素的合理取值范围;最后,利用温度预测程序对某空间相机热平衡试验中低温工况的平衡温度进行了预测,并与试验结束后的结果进行了对比。结果表明,预测温度与试验数据的误差为±1℃（在3%之内）,满足精度要求,对热平衡温度准确的预测有效的缩短了试验时间,节省试验费用。     

星载可展开天线热振动数值分析

根据非耦合动力学理论及有限元方法,研究分析了星载可展开天线的热振动。利用半正弦波温度冲击模拟热动力荷载,对天线典型节点的热振动位移和应力以及形面精度进行了数值分析。研究表明,急剧变化的温度荷载将导致该天线结构发生热振动,热振动响应明显大于静力学响应。     

Occurrence of equatorial plasma bubbles over Kolhapur

This paper reports the nightglow observations of OI 630.0 nm emissions, made by using all sky imager operating at low latitude station Kolhapur (16.8°N, 74.2°E and dip lat. 10.6°N) during high sunspot number years of 24th solar cycle. The images are analyzed to study the nocturnal, seasonal and solar activity dependence occurrence of plasma bubbles. We observed EPBs in images regularly during a limited period 19:30 to 02:30 LT and reach maximum probability of occurrence at 22:30 LT. The observation pattern of EPBs shows nearly no occurrence during the month of May and it maximizes during the period October–April. The equinox and solstice seasonal variations in the occurrence of plasma bubbles show nearly equal and large differences, respectively, between years of 2010–11 and 2011–12.     

A comprehensive numerical model investigating the thermal-dynamic performance of scientific balloon

The increase of balloon applications makes it necessary for a comprehensive understanding of the thermal and dynamic performance of scientific balloons. This paper proposed a novel numerical model to investigate the thermal and dynamic characteristics of scientific balloon in both ascending and floating conditions. The novel model consists of a dynamic model and thermal model, the dynamic model was solved numerically by a computer program developed with Matlab/Simulink to calculate the velocity and trajectory, the thermal model was solved by the Fluent program to find out the balloon film temperature distribution and inner Helium gas velocity and temperature field. These models were verified by comparing the numerical results with experimental data. Then the thermal and dynamic behavior of a scientific balloon in a real environment were simulated and discussed in details.