运载火箭测控系统技术与发展

针对中国新一代运载火箭发射轨道多样、外部环境日益复杂、上行控制和空间环境安全要求逐步提高等发展特点,以及高码率、高覆盖、高精度的测控需求,研究了天基测控、多音组合编码安控、高效遥测和测控数传一体化等几种运载火箭测控新技术的应用前景;从工程的角度,提出了中国运载火箭测控系统发展思路和天地一体化的测控体系结构;并就测控系统资源配置与使用模式、新型测控体制和测控手段、遥测和安控频段等重点发展方向简述了作者的观点。     

海洋环境与疲劳载荷联合作用下喷丸超高强度钢损伤机制

舰载机起落架结构既要遭受海洋大气、海上盐雾和海浪飞溅等严酷海洋环境的侵蚀作用,又要承受较大的弹射起飞/拦阻着舰载荷,在海洋环境与疲劳载荷联合作用下超高强度钢起落架结构承载能力显著劣化,对使用安全构成严重挑战。针对超高强度钢喷丸和未喷丸两种试验件,基于舰载机服役的海洋环境,开展了腐蚀+疲劳交替试验和预腐蚀疲劳试验研究,得到了疲劳寿命变化规律,通过粗糙度、晶粒度、显微硬度、残余应力和疲劳断口分析,揭示了喷丸对疲劳寿命增强的作用机制、腐蚀+疲劳损伤交替作用机制和预腐蚀疲劳损伤作用机制。结果表明,喷丸强化后疲劳寿命平均增幅为93.1%;对于喷丸试验件,深度约为20 μm的轻微点蚀,导致疲劳寿命衰减幅度达到30%;喷丸强化与腐蚀两者之间存在着此消彼长的竞争机制;腐蚀+疲劳交替作用损伤机制对该型超高强度钢造成的疲劳寿命衰减要比预腐蚀疲劳损伤机制严重得多,加速腐蚀试验时间相同的条件下前者疲劳寿命为后者的47%~54%。     

压电智能结构的实验研究

在复合材料表层铺设压电元件，利用压电元件能够实现力学量和电学量之间相互转化的独特性能，可将其用作传感器和驱动器，赋予材料和结构传感及动作的能力。本研究的压电材料采用锆钛酸铅压电陶瓷，基体材料采用玻璃纤维－环氧树脂复合材料，与外部信号采集和控制系统结合，构成了智能结构实验系统。本文对这一系统的损伤诊断和损伤主动控制功能进行了实验研究。该结构一方面可对冲击、过载等可能造成损伤的原因进行监测，并诊断裂缝、连接松动等损伤的产生和位置，另一方面还可自适应地驱动结构中的压电驱动器，改善结构应力状态，防止损伤的扩展。     

Solar and magnetic control on night-time enhancement in TEC near the crest of the Equatorial Ionization Anomaly

The ionospheric Total Electron Content (TECs), derived by dual frequency signals from the Global Positioning System (GPS) recorded near the Indian equatorial anomaly region, Bhopal (23.2°N, 77.4°E, Geomagnetic 14.2°N) were analyzed for the period of January, 2005 to February, 2008. The work deals with monthly, diurnal, solar and magnetic activity variations on night-time enhancement in TEC. From a total of 157 night-time enhancements, 75 occur during pre-midnight and 82 post-midnight hours. The occurrence of night-time enhancement in TEC is utmost during summer months, followed by equinox and winter months. The occurrence of night-time enhancement in TEC decreases with increase in solar and magnetic activities. We observed that peak size and half amplitude duration are positively correlated, while time of occurrence of night-time enhancement in TEC and time of peak enhancement are negatively correlated with solar activity. The peak size, half amplitude duration, time of peak enhancement and time of occurrence of night-time enhancement in TEC shows negative correlation with magnetic activity. The results have been compared with the earlier ones and discussed in terms of possible source mechanism responsible for the enhancement at anomaly crest region.     

Modeling and analysis of Earth’s gravity field measurement performance by inner-formation flying system

The Earth’s gravity field can be measured with high precision by constructing the purely gravitational orbit of the inner-satellite in Inner-formation Flying System (IFS), which is independently proposed by Chinese scholars and offers a new way to carry out gravity field measurement by satellite without accelerometers. In IFS, for the purpose of quickly evaluating the highest degree of recovered gravity field model and geoid error as well as analyzing the influence of system parameters on gravity field measurement, an analytical formula was established by spectral analysis method. The formula can reflect the analytical relationship between gravity field measurement performance and system parameters such as orbit altitude, the inner-satellite orbit determination error, the inner-satellite residual disturbances, data sampling interval and total measurement time. This analytical formula was then corrected by four factors introduced from numerical simulation of IFS gravity field measurement. By comparing computation results from corrected analytical formula and the actual gravity field measurement performance by CHAMP, the correctness and rationality of this analytical formula were verified. Based on this analytical formula, the influences of system parameters on IFS gravity field measurement were analyzed. It is known that gravity field measurement performance is a monotone decreasing function of orbit altitude, the inner-satellite orbit determination error, the inner-satellite residual disturbances, data sampling interval and the reciprocal of total measurement time. There is a match relationship between the inner-satellite orbit determination error and residual disturbances, in other words, the change rate of gravity field measurement performance with one of them is seriously restricted by their relative size. The analytical formula can be used to quantitatively evaluate gravity field measurement performance fast and design IFS parameters optimally. It is noted that the analytical formula and corresponding conclusions are applied to any gravity satellite which measures gravity field by satellite perturbation orbit.     

Space technology transfer: Spin-off cases from Japan

Government organizations have to justify high expenditure during periods of financial crisis such as the one we are experiencing today. Space agencies have attempted to increase the returns on their investments in space missions by encouraging the commercial use of advanced technologies. This paper describes two technology transfer (TT) cases promoted by JAXA, in order to identify the organizational models and determinants of TT. The development of a TT process from space to Earth not only benefits the aerospace industry but also the network of national companies. The aim of the paper is to investigate who the actors are and the nature of their role, as well as the determinants of the TT process in the Japanese space sector. The case studies confirm the typical path of transfer as ‘Earth–space–Earth’.     

用中国传统文化建构当代大学生思想政治教育体系

中国传统化是中华民族在生息繁衍中形成的理论化和非理论化的，并转而影响整个社会的，具有稳定的共同精神、心理状态、思维方式和价值取向等精神成果的浓缩；它对于建构当代大学生思想政治教育体系具有重要的指向价值。     

Gas exchange rates of potato stands for bioregenerative life support

Plants can provide a means for removing carbon dioxide (CO₂) while generating oxygen (O₂) and clean water for life support systems in space. To study this, 20 m² stands of potato (Solanum tuberosum L.) plants were grown in a large (113 m³ vol.), atmospherically closed chamber. Photosynthetic uptake of CO₂ by the stands was detected about 10 DAP (days after planting), after which photosynthetic rates rose rapidly as stand ground cover and total light interception increased. Photosynthetic rates peaked ca. 50 DAP near 45 μmol CO₂ m⁻² s⁻¹ under 865 μmol m⁻² s⁻¹ PPF (average photosynthetic photon flux), and near 35 μmol CO₂ m⁻² s⁻¹ under 655 μmol m⁻² s⁻¹ PPF. Short term changes in PPF caused a linear response in stand photosynthetic rates up to 1100 μmol m⁻² s⁻¹ PPF, with a light compensation point of 185 μmol m⁻² s⁻¹ PPF. Comparisons of stand photosynthetic rates at different CO₂ concentrations showed a classic C₃ response, with saturation occurring near 1200 μmol mol⁻¹ CO₂ and compensation near 100 μmol mol⁻¹ CO₂. In one study, the photoperiod was changed from 12 h light/12 h dark to continuous light at 58 DAP. This caused a decrease in net photosynthetic rates within 48 h and eventual damage (scorching) of upper canopy leaves, suggesting the abrupt change stressed the plants and/or caused feedback effects on photosynthesis. Dark period (night) respiration rates increased during early growth as standing biomass increased and peaked near 9 μmol CO₂ m⁻² s⁻¹ ca. 50 DAP, after which rates declined gradually with age. Stand transpiration showed a rapid rise with canopy ground cover and peaked ca. 50 DAP near 8.9 L m⁻² d⁻¹ under 860 μmol m⁻² s⁻¹ PPF and near 6.3 L m⁻² d⁻¹ under 650 μmol m⁻² s⁻¹ PPF. Based on the best photosynthetic rates from these studies, approximately 25 m² of potato plants under continuous cultivation would be required to support the CO₂ removal and O₂ requirements for one person.     

一类离散系统流行病动力学模型研究

从经典的SIS流行病模型中获知很多离散的动力学模型也有相同的形式,那么选其中的一个离散的动力学模型进行分析研究。不变集为区间[0,1];有两个参数,p,θ∈[0,1]对每一个动力学现象是敏感的,且当p和θ在渐进的变化过程中,p比θ更敏感。半衰期分叉的出现,显示一个稳定的半衰期分叉或者唯一一个稳定点,原点总是一个不稳定点,数值模拟验证了结论。     

PLC在电梯控制系统中的应用

本文给出了电梯ＰＬＣ控制系统的结构框图，提供了电梯ＰＬＣ控制系统设计及改造的方法和流程图，对主要梯形图程序设计进行了说明。