导航卫星光压建模及表面光学特性参数影响分析

为分析某导航卫星（为表述方便,下文称为B导航卫星或B卫星）的表面光学特性参数变化产生的影响,本文首先参考GPS光压建模方法,结合B卫星的结构、控制及轨道特点,构建了一种适合B卫星的分析型光压模型。在该光压模型的约束下,分析表面光学特性参数变化产生的影响。最后利用建立的光压模型进行轨道预报,与精密星历等实际数据比较,验证了模型并分析了表面光学特性参数对轨道预报的影响。     

Surface latent heat flux anomalies quasi-synchronous with ionospheric disturbances before the 2007 Pu’er earthquake in China

One of various mechanisms of pre-earthquake lithosphere–atmosphere–ionosphere coupling as possible explanation of the seismo-ionospheric effects is connected with the release of latent heat. Abnormal variations of ionospheric electromagnetic parameters possibly related to the 2007 Ms 6.4 Pu’er earthquake in China were reported. This paper attempts to examine whether there were abnormal changes of surface latent heat flux (SLHF) linked with this pre-earthquake ionospheric disturbances. The spatio-temporal statistical analyzes of multi-years SLHF data from USA NCEP/NCAR Reanalysis Project reveal that local SLHF enhancements appeared 11, 10 and 7 days before the Pu’er earthquake, respectively. As contrasted to the formerly reported local ionospheric Ne enhancement 9 days before the shock observed by DEMETER satellite, it is discovered that the SLHF and Ne anomalies are quasi-synchronous and have good spatial correspondence with the epicentre and the local active faults. This is valuable for understanding the seismogenic coupling processes and for recognizing earthquake anomaly with multiple parameters from integrated Earth observation system.     

Hybrid method for crater detection based on topography reconstruction from optical images and the new LU78287GT catalogue of Lunar impact craters

Impact craters are ubiquitous and well-studied structures of high geological relevance on the surfaces of the Earth’s Moon, the terrestrial planets, the asteroids and the satellites of the outer planets. Therefore, it is not surprising that crater detection algorithms (CDAs) are one of the most studied subjects of image processing and analysis in lunar and planetary science. In this paper we are proposing a Hybrid CDA: a modified DEM (digital elevation map) reconstruction method used as a step in an existing CDA based on Hough transform. The new Hybrid CDA consists of: (1) reconstruction of topography from optical images using a shape from shading approach; (2) utilization of the DEM-based CDA; (3) correction of brightness and contrast of optical images used in order to be more suitable for evaluation of detections. An additional result of this work is a new method for evaluation of topography reconstruction algorithms, using a DEM-based CDA and an earlier approach for evaluation of CDAs. The new Hybrid CDA was tested using two Chandrayaan-1 Moon Mineralogy Mapper (M³) images and two excerpts of the Lunar Reconnaissance Orbiter (LRO) Wide Angle Camera (WAC) global optical image mosaic. As a result, the number of craters inside these four regions increased considerably from 1754 (as available in the previous LU60645GT catalogue) to 19 396 craters (as available in the resulting new LU78287GT catalogue). This confirmed the practical applicability of the new Hybrid CDA, which can be used in order to considerably extend current crater catalogues.     

纤维表面处理对PBO/ 环氧界面性能的影响

为提高PBO纤维/环氧树脂的剪切强度,采用聚合物涂层法对PBO纤维进行表面改性。通过NOL环复合材料层间剪切强度测试,研究不同浓度的表面涂层处理液、不同浸渍工艺对复合材料层间剪切强度的影响。结果表明:PBO纤维表面经不同涂层处理液处理后,层间剪切强度均高于未经表面处理的;当PBO纤维经过以涂层A为一浴浸渍液、涂层B为二浴浸渍液的两次浸渍工艺处理后,层间剪切强度最高,比未经表面处理的提高了61%。     

激光选区熔化制备钛合金点阵材料无损表征

通过激光选区熔化制备BCC和DOD结构的钛合金金属点阵,使用Micro–CT对两种结构的钛合金点阵材料进行扫描和三维重建。Micro–CT图像清晰地显示金属点阵内部结构,BCC和DOD单胞整齐地以周期性进行排列,且内部存在少量圆形、椭圆形缺陷。通过将实际样品三维数据与CATIA数模进行比对,发现钛合金点阵在制备过程中出现一定程度翘曲。此外使用共聚焦显微镜并基于Micro–CT图像对BCC和DOD两种金属点阵进行表面粗糙度测定。结果表明,Micro–CT在钛合金点阵材料内部结构、缺陷、制备误差、粗糙度测试等表征方面具有显著的应用价值。     

碳化材料三维烧蚀热响应有限元计算研究

针对碳化烧蚀热防护材料三维温度场计算问题进行了研究。采用弹簧松弛法模拟防热层表面后退运动,应用化学反应动力学模型描述材料内部热解过程,内部温度场计算模型考虑了防热材料的热传导、热解吸热、热解气体在碳化层内的流动以及热解气体与碳化层之间的热交换。对控制方程采用有限元方法进行离散,时间方向采用Newton-GMRES隐式迭代推进求解。将计算结果与经典程序的计算结果及实验数据进行了比对,初步验证了计算方法的可靠性,并通过球头算例展示了程序对三维问题的良好处理能力。     

C─8587A型多参数表面粗糙度测量仪参数运算软件分析

介绍了C-8587A型多参数表面粗糙度测量仪各项参数的定义、测量、数学模型、流程控制、功能特点，用单片机实现仪器的各项功能，利用宏汇编语言的编程技巧得以实现，表现了仪器的优越性。     

钛合金高压气瓶表面裂纹程序载荷谱试验的结果和分析

本文介绍两个带有疲劳表面裂纹的钛合金高压气瓶在程序载荷谱下的试验结果,并对它作了简单的分析。结果表明,即使气瓶具有“最大可能出现”的表面裂纹,它在公路运输及地面贮存保压过程中也是安全的。利用我们推导的表面裂纹半经验公式,参考NASA的K_(TH)/K_I实验数据,估计了在使用载荷作用下,气瓶在水介质中贮存保压较长时间裂纹不产生扩展的临界尺寸。     

Grinding behavior and surface appearance of（TiC_p＋ TiB_w）/Ti-6Al-4V titanium matrix composites

（TiCp＋ TiBw）/Ti-6Al-4V titanium matrix composites（PTMCs） have broad application prospects in the aviation and nuclear field. However, it is a typical difficult-to-cut material due to high hardness of the reinforcements, high strength and low thermal conductivity of Ti-6Al-4V alloy matrix. Grinding experiments with vitrified CBN wheels were conducted to analyze comparatively the grinding performance of PTMCs and Ti-6Al-4V alloy. Grinding force and force ratios, specific grinding energy, grinding temperature, surface roughness, ground surface appearance were discussed. The results show that the normal grinding force and the force ratios of PTMCs are much larger than that of Ti-6Al-4V alloy. Low depth of cut and high workpiece speed are generally beneficial to achieve the precision ground surface for PTMCs. The hard reinforcements of PTMCs are mainly removed in the ductile mode during grinding. However, the removal phenomenon of the reinforcements due to brittle fracture still exists, which contributes to the lower specific grinding energy and grinding temperature of PTMCs than Ti-6Al-4V alloy.     

航空发动机表面工程应用的问题与思考

我国航空发动机的研制和发展与世界先进水平存在较大差距,而表面工程应用方面的问题是诸多制约因素之一。在简单介绍现代表面工程技术发展及在我国航空发动机制造领域的应用现状基础上,重点对存在的问题进行探讨,分析原因,并提出解决措施。