静止轨道卫星通信链路的预算与分析

星地链路计算作为卫星通信的重要技术，是卫星通信系统设计的基础和理论依据，直接决定了卫星通信系统的链路通信质量。由于影响卫星链路的因素很多，设计中存在一处不合理即使得整条星地链路不可用，造成巨大的损失。而且在实际设计中无法做到最理想的链路状态，往往需要在某方面有所取舍，这也是链路计算中的一大难点。基于目前国际通用的链路计算方法，将星地链路上下行拆分，独立计算，综合分析，再结合实际工程经验，分析和计算实际工程案例，针对不同的链路配置给出相应合理的设计方法，可作为静止轨道通信卫星星地链路计算分析的参考。     

A time-frequency analysis of the thermal radiation background anomalies caused by large earthquakes: A case study of the Wenchuan 8.0 earthquake

Strong earthquakes have an impact on the regional thermal radiation background, which has been both observed and confirmed. This effect produces anomalies in the thermal radiation background (TRBA) and increases the difficulty of extracting a thermal radiation anomaly (TRA) that is associated with an earthquake occurring during the same time period. The extraction and identification of such anomalies has been ignored by previous studies. In this study, we investigate the time-frequency analysis (TFA) method, together with the wavelet filtering of the Daubechies method and the relative power spectrum analysis of the Fourier Welch method to extract and analyse the TRBA caused by the 2008 Wenchuan Ms 8.0 earthquake and the TRA of the 2013 Minxian-Zhangxian Ms 6.6 earthquake using data concerning the brightness temperature of a black body (TBB) from the Fengyun-2 series of geostationary meteorological satellites developed by China. The result showed that this method can effectively extract and analyse the TRBA caused by the Wenchuan earthquake and the TRA of the Minxian-Zhangxian earthquake form a complex background environment. Furthermore, we discussed the impact of the earthquake on the TRBA and segmented the process. The impact is mainly reflected by three aspects; the characteristic period of the TRBA changes, the TRBA occurs at the same time every year, which is identical to the time at which the earthquake anomaly occurred, and the impact process is in stages. We also summarized the correlation between the characteristic parameters of a TRA and the regional thermal radiation background, geography, and climatic factors.     

A surface parametric control and global optimization method for axial flow compressor blades

An aerodynamic optimization method for axial flow compressor blades available for engineering is developed in this paper. Bezier surface is adopted as parameterization method to control the suction surface of the blades, which brings the following advantages:(A) significantly reducing design variables;(B) easy to ensure the mechanical strength of rotating blades;(C) better physical understanding;(D) easy to achieve smooth surface. The Improved Artificial Bee Colony(IABC) algorithm, which significantly increases the convergence speed and global optimization ability, is adopted to find the optimal result. A new engineering optimization tool is constructed by combining the surface parametric control method, the IABC algorithm, with a verified Computational Fluid Dynamics(CFD) simulation method, and it has been successfully applied in the aerodynamic optimization for a single-row transonic rotor(Rotor 37) and a single-stage transonic axialflow compressor(Stage 35). With the constraint that the relative change in the flow rate is less than0.5% and the total pressure ratio does not decrease, within the acceptable time in engineering, the adiabatic efficiency of Rotor 37 at design point increases by 1.02%, while its surge margin 0.84%,and the adiabatic efficiency of Stage 35 0.54%, while its surge margin 1.11% after optimization, to verify the effectiveness and potential in engineering of this new tool for optimization of axial compressor blade.     

空间相机中与大口径透镜有关的结构设计分析

某空间相机镜头在光学设计时,因透过率、吸收率等原因,为了满足光学系统要求,经过各方面平衡后,其中有一片透镜比正常径厚比设计的偏薄些。在镜头总体结构设计时,单独对该镜片及与之相配的结构件进行了有限元分析和实验检测,发现不同的结构形式对镜片面形影响不同。为了解决这一问题,在实验中进行了探讨,以保证整个相机系统满足空间相机的实用要求。     

飞行器表面红外辐射的模型以及红外特征分析(英文)

隐身最重要的技术之一是评估飞行器被红外探测器接收到的红外辐射强度。本文针对飞行器表面红外辐射特征计算的问题提出一个方法。首先通过分析飞行器表面气动加热、发动机热部件等主要热源,建立了CFD计算模型并获得了飞行表面的温度场。并结合反向蒙特卡洛方法建立求解飞行器表面复杂几何外形的红外辐射模型。通过数值模拟,比较了飞行器主要部件在水平和侧向上红外辐射强度所占的比重;并针对飞行器主要部件冷却对红外辐射强度的影响效果进行了研究。计算结果表明:在水平方向降低飞行器头部、垂尾、机翼部件表面温度10K能降低红外辐射强度大于8%;而在侧方向降低飞行器头部、垂尾、机翼部件表面温度10K能降低红外辐射强度小于8%。计算结果可为隐身设计提供参考。     

机载雷达罩热载荷仿真分析关键技术研究

研究了机载雷达罩热载荷仿真分析的3个关键技术,一是雷达罩及天线的CAD建模技术,并应用Fluent计算罩体外表面温度;二是建立雷达罩的多腔体热辐射模型,以得到雷达罩内表面的温度分布;三是温度插值技术,用以将流场计算得到的温度值插值到对应的热应力分析模型上。     

航空发动机燃烧室出口高温热电偶校准技术

在高温校准风洞上,对测量航空发动机燃烧室出口温度气冷式和非气冷式这两种形式的高温热电偶进行校准,确定了高温热电偶的辐射修正系数.校准实验结果表明:高温热电偶的辐射误差随气流速度和压力的增加而降低,而且气流温度与航空发动机机匣壁面温度的温差越大,辐射误差也越大.比较两种结构形式的高温热电偶,非冷却式高温热电偶的测量误差比气冷式高温热电偶的相对较小.      

基于响应面近似技术的平流层飞艇协同设计优化

针对平流层飞艇多学科设计优化问题,引入协同优化算法,分析基于响应面近似模型的协同优化方法CO/RSA的执行步骤和特点,并介绍响应面近似模型的构建方法;建立平流层飞艇各学科模型,并对学科间耦合关系进行分析;运用建立的气动/推进、结构、能源三个耦合子系统的学科分析模型和系统优化模型,以平流层飞艇总质量最小为优化目标,综合考虑浮重、推阻和能源平衡,采用CO/RSA方法对平流层飞艇进行设计优化.结果表明:所建立的平流层飞艇的MDO模型是合理的,CO/RSA算法应用于飞艇总体设计优化是有效的,研究结果可为平流层飞艇方案论证和方案设计提供参考.     

涡扇发动机轴对称引射收敛喷管红外辐射特性

数值研究了涡扇发动机轴对称引射收敛喷管的红外辐射特性.排气系统的流场计算采用商用数值模拟软件,红外辐射特性计算采用自主开发的软件NUAA-IR,计算分析了轴对称收敛喷管和引射收敛喷管在3~5μm波段红外辐射特性以及喷管内不同固体壁面在探测方向上的红外辐射贡献.结果表明:引射收敛喷管的红外抑制作用主要在于引射加强了尾喷流与环境大气的掺混,减小了尾喷流的长度,降低了燃气流的红外辐射;引射收敛喷管对喷管内固体壁面的遮挡以及降温作用很小,只在方位角为20°方向上对内涵壁面、外涵内壁等中低温壁面有效;引射收敛喷管的总积分辐射强度在方位角为0°~15°范围内与收敛喷管几乎相等,在其他方位角范围内均小于收敛喷管,且在方位角为40°方向上降低幅度达到最大,约为34%.      

Specific grinding energy and surface roughness of nanoparticle jet minimum quantity lubrication in grinding

Nanoparticles with the anti-wear and friction reducing features were applied as cooling lubricant in the grinding fluid. Dry grinding, flood grinding, minimal quantity of lubrication（MQL）, and nanoparticle jet MQL were used in the grinding experiments. The specific grinding energy of dry grinding, flood grinding and MQL were 84, 29.8, 45.5 J/mm³, respectively. The specific grinding energy significantly decreased to 32.7 J/mm³ in nanoparticle MQL. Compared with dry grinding, the surface roughness values of flood grinding, MQL, and nanoparticle jet MQL were significantly reduced with the surface topography profile values reduced by 11%, 2.5%, and 10%,respectively, and the ten point height of microcosmic unflatness values reduced by 1.5%, 0.5%,and 1.3%, respectively. These results verified the satisfactory lubrication effects of nanoparticle MQL. MoS₂, carbon nanotube（CNT）, and ZrO₂ nanoparticles were also added in the grinding fluid of nanoparticle jet MQL to analyze their grinding surface lubrication effects. The specific grinding energy of MoS₂ nanoparticle was only 32.7 J/mm³, which was 8.22% and 10.39% lower than those of the other two nanoparticles. Moreover, the surface roughness of workpiece was also smaller with MoS₂ nanoparticle, which indicated its remarkable lubrication effects. Furthermore,the role of MoS₂ particles in the grinding surface lubrication at different nanoparticle volume concentrations was analyzed. MoS₂ volume concentrations of 1%, 2%, and 3% were used.Experimental results revealed that the specific grinding energy and the workpiece surface roughness initially increased and then decreased as MoS₂ nanoparticle volume concentration increased.Satisfactory grinding surface lubrication effects were obtained with 2% MoS₂ nanoparticle volume concentration.