基于THz大气窗口的金星地表遥感研究

文章以金星快车VIRTIS载荷相关数据为出发点,验证金星大气模型相适应参数及其窗口。并通过模型参数中的THz频谱分布,阐述实现金星地表遥感探测科学目标的THz相适应理论基础,并提出多功能金星遥感构想。     

Simultaneous determination of aerosol- and surface characteristics from top-of-atmosphere reflectance using MERIS on board of ENVISAT

The determination of aerosol optical thickness (AOT) from nadir scanning multi-spectral radiometers, like SeaWiFS, MERIS or MODIS, requires the separation of spectral atmospheric and surface properties. Since SeaWiFS and MERIS do not provide information at 2.1 μm, like MODIS, the estimation of the surface reflectance cannot be made by the cross correlation approach described by Kaufman et al., 1997. The BAER approach (Bremen AErosol Retrieval), von Hoyningen-Huene et al., 2003, uses a linear mixing model of spectra for ‘green vegetation’ and ‘bare soil’, tuned by the NDVI, determining an apparent surface to enable this separation of aerosol and surface properties from VIS and NIR channels. Thus AOT can be derived over a wide range of land surfaces for wavelengths <0.67 μm. Using MERIS L1 data over Europe, the AOT retrieved is comparable with ground-based observations, provided by AERONET. Regional variation of AOT can be observed, showing the atmospheric variability for clear sky conditions by: large scale variation of aerosol turbidity, regional pollution, urban regions, effects of contrails and cases of aerosol-cloud interaction. Simultaneously with the spectral AOT also spectral surface reflectance is obtained, where all atmospheric influences have been considered (molecules, aerosols and absorbing gases (O₃)) for channels with wavelengths <0.67 μm. The AOT is extrapolated by Angström power law to NIR channels and the atmospheric correction for land surface properties is performed, enabling the further investigation of land use and spectral land properties.     

Surface integrity and fatigue behavior when turning γ-TiAl alloy with optimized PVD-coated carbide inserts

This paper presents a comprehensive investigation on the effects of tool and turning parameters on surface integrity and fatigue behavior in turning c-Ti Al alloy. The wear of inserts surface, cutting forces, and surface roughness were studied to optimize PVD-coated carbide inserts.Surface topography, residual stresses, microhardness, and microstructure were analyzed to characterize the surfaces layer under different turning parameters. Surface integrity and fatigue life tests of c-Ti Al alloy were conducted under turning and turning-polishing processes. The results show that compared to CNMG120412-MF4, CNMG120408-SM is more suitable because it obtained low cutting force, surface roughness, and tool wear. With increasing the cutting speed and depth, the depths of the compressive residual stress layer, hardening layer, and plastic deformation layer increased. For turning and turning-polishing specimens, the compressive residual stress was relaxed by less than 20%–30% after 10~7 cycles. The fatigue life of a turning-polishing specimen with R_a= 0.15 mm has increased 3 times from that of a turning specimen with R_a= 0.43 mm.     

曲面积分在三重积分中的应用

得到了把一类三重积分化为曲面积分的一个定理，并给出定理的一些应用。     

某型导弹前支脚协调零件加工工艺研究

叙述某型导弹的新型结构－－斜燕尾槽配合的具有高协调要求的镀镍、机加工的工艺方法。改进后的“镀前加工协调尺寸预先补偿法”，已成功应用于某型导弹的批产。在同类协调零件制造过程中，该种方法具有较大的借鉴作用。     

30CrMnSiA钢管外圆磁力研磨工艺的研究

采用化学粘结Ｆｅ＋ＳｉＣ磁性料对３０ＣｒＭｎＳｉＡ钢管外圆进行磁力研磨试验，研究了磨料成分、粒度以及研磨时间与研磨后表面粗糙度的关系，试验所得到的研磨表面粗糙度达到了Ｒａ０．０５μｍ。     

CM-SAF surface radiation budget: First results with AVHRR data

In the phase of redefinition of the EUMETSAT ground segment seven so called Satellite Application Facilities (SAF) each of them serving dedicated user groups have been established in Europe. The SAF on climate monitoring (CM-SAF) will deliver a comprehensive set of climate variables, including from different cloud products, radiation budget at the top of the atmosphere, surface radiation budget and tropospheric humidity. A consistent dataset of cloud and radiation products in a high spatial resolution on a uniform grid is derived. The CM-SAF is a joint project of the German Meteorological Service, EUMETSAT and five other European Meteorological Services. It is dedicated to produce climate datasets using data from instruments onboard of METEOSAT Second Generation and polar orbiting satellites NOAA and METOP. After the development phase, the CM-SAF has started its initial operational phase in the end of 2003. In this context, the algorithms have been implemented at the processing centres and the processing of satellite data from the polar orbiting satellites of NOAA has commenced. This paper gives an overview of the first products of surface radiative fluxes and their validation with selected surface sites.     

捷联姿态解算宏汇编软件

编制捷联姿态解算软件是捷联惯性姿态参考系统研制中的重要一环。由于对计算的实时性和精度都有较高的要求，又在专用的弹上计算机上进行，所以增加了制作的难度。从变量取值范围、比例因子确定、字长选择、程序结构等几方面介绍了捷联姿态解算软件的编制情况。该软件是在导弹计算机上用ＴＭＳ３２０Ｃ２５宏汇编语言编制的。该软件经过地面实物试验，验证了其正确性。     

卫星表面材料体、面电阻率测试方法及电压对体、面电阻率影响的研究

对卫星表面材料的体电阻率、面电阻率的测试方法进行了研究,并设计了测量电极系统,测量了常用热控涂层的体、面电阻率,研究了测量电压对测量结果的影响。