硝胺推进剂界面键合的表征研究

从红外光谱分析，表面（界面）自由能测定、光电子能谱分析等方面，研究了键合剂，包覆固体填料颗粒对界面增强的效果，并与静态力学性能的数据进行了对比，结果表明；取代酰胺类键合剂对ＨＭＸ间的作用力为氢键。效果倨于醇胺，多元胺类化合物，其中一种键合剂对ＨＭＸ的浸润可以在热力学和动力学两方面达到较好的统一，键合效果并不仅仅取决于包覆度的大小，还与键合剂附着在ＨＭＸ表面上形成的界面层或预包覆层的性质有关。     

Remote estimation of the structure of the surface layer of Mercury

Results of the optical observations of Mercury and the Moon confirm the close similarity of photometric properties of the bodies. Undoubtedly, the surface of Mercury, which is subjected to the same processes, is covered by a mantle of shattered rocks – the regolith. The structure of the reflecting layer determines the photometric and polarization characteristics of the surface of a planetary body. Despite the general similarity of the integral optical properties of the surfaces of Mercury and the Moon, specific characteristics of the media of these celestial bodies manifest themselves as identifiable differences in the details of the measured parameters: Mercury’s regolith is smoother than of the Moon, probably contains a greater fines fraction, and has greater maturity.     

测量超光滑表面粗糙度参数的反散射计算研究

介绍一种高分辨力、无接触式测量超光滑表面粗糙度参数的反散射计算测量技术。实现该技术的测量装置的角分辨力为0.1°。它可以测量导体或非导体表面纳米级精确度的粗糙度。     

镜反射凹面及相互可视表面的轨道外热流计算

通过对空间表面所受外热流以及镜反射表面所具有的特性的分析，提出了采用蒙特卡罗法计算镜反射凹面及镜反射相互可视表面的轨道热流的方法，并对半球凹面和两相互垂直可视平板的轨道热流进行了计算。     

Inconel718多通道放电烧蚀铣削加工技术研究

为了提高高温合金Inconel718电火花放电烧蚀加工效率,改善工件表面质量,使用多通道放电烧蚀加工新方法对Inconel718进行多通道放电烧蚀铣削加工试验。研究表明:在多通道放电烧蚀加工过程中,放电通道的个数是随机的;在一个脉冲放电周期中,随着通道数目的增加,电压波形呈阶梯下降,总回路电流波形呈阶梯上升。对比常规电火花烧蚀加工,多通道放电烧蚀加工的总回路电流提高,使得材料蚀除率提高73.7%;同时,多通道放电分散放电能量,使得多通道放电烧蚀加工后工件表面粗糙度较常规电火花烧蚀加工下降14.6%,工件表面微裂纹变少,裂纹的宽度和长度变小。     

刀具磨损对TC11铣削表面粗糙度与残余应力的影响

为了研究TC11钛合金铣削加工过程中刀具磨损对加工表面质量的影响规律,设计了刀具磨损与铣削表面粗糙度、表面残余应力的试验。结果表明:TC11钛合金铣削加工过程中的刀具磨损可以分为:初期磨损、正常磨损、剧烈磨损三个阶段。当刀具处于"初期磨损"时,TC11铣削表面粗糙度随切削时间逐渐减小,铣削表面残余应力也呈减小趋势;当刀具处于"正常磨损"阶段时,铣削表面粗糙度和铣削表面残余应力都呈增加趋势,但增加的速度平稳;当刀具进入"剧烈磨损"阶段时,铣削表面粗糙度迅速增大,表面残余应力也较前两个阶段显著增加。另外,试验过程中的TC11铣削表面残余应力均表现为压应力。     

星用介质材料表面充放电效应试验研究

航天器表面介质材料易遭受表面充放电危害。利用30keV单能电子对几种不同的航天介质材料进行了表面充放电模拟试验,测量了不同电子通量辐照下的表面充电电位以及放电脉冲。试验结果表明,聚酰亚胺薄膜在接地处理不当时表面可充至千伏以上,易发生表面放电,且辐照强度越大,放电频率越高。表面镀铝的聚酰亚胺薄膜在不接地时,铝膜成为悬浮导体更加剧了放电的危害。而通过渗碳处理的聚酰亚胺薄膜,其良好的导电性能可有效抵御nA/cm~2量级电子的表面充电。聚四氟乙烯天线罩表面未进行防静电处理时,表面充电电位可达万伏量级,极易发生放电。     

Thermoelastohydrodynamic analysis of misaligned bearings with texture on journal surface under high-speed and heavy-load conditions

Hydrodynamic journal bearings are used to support the planetary gears in the transmission system of a Geared Turbo Fan engine, and they operate under severe working conditions, such as misalignment, high speed, and heavy load. Surface texture is regarded as an effective approach to improve mechanical properties under severe working conditions. However, the effects of surface texture on misaligned journal bearings under severe conditions have not been well studied. Therefore, a thermoelastohydrodynamic(TEHD) lubricating model with a textured and misaligned journal is presented in this study. Solid deformation, heat transfer between oil and the bearing, and heat convection between air and the bearing are considered in the model. The effects of cavitation and viscosity-temperature are also taken into account. The impacts of surface texture parameters and the misalignment angle on lubricating properties are investigated in the model. Results indicate that the bearing lubricating performance is greatly improved by optimal surface texture considering journal misalignment. The maximum oil film pressure and load-carrying capacity of a journal bearing increase with journal misalignment. Meanwhile, the oil film temperature increases sharply while considering misalignment.     

Experimental study of effect of post processing on fracture toughness and fatigue crack growth performance of selective laser melting Ti-6Al-4V

For Ti-6Al-4V, a titanium alloy increasingly used in aerospace structure, selective laser melting (SLM) is an attractive additive manufacturing technology, which is attributed to its complex construction capability with high accuracy and good surface quality. In order to obtain qualified mechanical properties, SLM parameters and post processing should be tailored for diverse service conditions. Fracture toughness and fatigue crack growth (FCG) behavior are critical characteristics for damage tolerance evaluation of such metallic structures, and they are affected by post processing technologies significantly. The objective of this study is to obtain the fracture toughness and fatigue crack growth behavior of Ti-6Al-4V manufactured by SLM, and to evaluate the influence of post-SLM thermomechanical treatment and surface machining. Fracture toughness and FCG tests were performed for SLM Ti-6Al-4V in three types of post processing status: as-built, heat treated and hot isostatically pressed (HIPed), respectively. Specimens with as-built and machined surface were tested. The microstructure and fractography were analyzed as well in order to investigate the relevance among manufacture process, microstructure and mechanical properties. The results demonstrate that as-built SLM Ti-6Al-4V presents poor ductility and FCG behavior due to martensitic microstructure and residual stresses. Both heat treatment and hot isostatic pressing improve the plane-stress fracture toughness and FCG performance considerably, while surface machining shows slight effect.     

铣削参数对7055-T6铝合金耐腐蚀性的影响

文摘研究了铣削工艺参数对切削力、表面粗糙度、轮廓与形貌、自腐蚀电位和电流密度的影响。结果表明:随着切削速度的增大,切削力与表面粗糙度呈现先增大后减小再增大的变化规律;随着轴向切深的增加,切削力与表面粗糙度都呈增大的趋势;铣削后刀面对已加工表面的挤压改善了铝合金的腐蚀性能;切削转速为4 000 r/min,轴向切深为0.25 mm时,加工表面耐腐蚀性能最优;在较大的轴向切深下,已加工表面易产生微裂纹,而导致腐蚀加剧。