复合材料切削表面粗糙度测试方法的研究

利用先进的TalyScan150型表面粗糙度测试仪，采用不同测试手段和不同测试参数对复合材料切削试样表面进行测量、计算，得出复合材料切削表面粗糙度；通过比较分析，得到了适用于复合材料切削表面粗糙度测试的手段及参数，建立了复合材料切削表面粗糙度的测试方法，该方法为全面评价复合材料表面质量提供了测试基础。     

异形竖板传热元件壁面温度的精确测量

结合异形竖板降膜蒸发器，研究了异形竖板传热元件壁面温度的测量方法。从整个测温系统入手，分别阐述了测温元件的选择、热电偶的焊接及敷设等方法；并给出一种测量非等温场望面平均温度时，对称互补式热电偶敷设的新方法。达到了准确测量壁面温度的目的，对异形竖板降膜蒸发器的传热理论研究具有重要的意义。     

Elliptical model for surface topography prediction in five-axis flank milling

In five-axis flank milling operations, the intersecting surfaces of different cutting edges create roughness on the milled surfaces that cannot be ignored in situations with strict requirements, especially in aeronautical manufacturing. To focus on motion problems in milling operations, this paper presents a new model that utilizes elliptical paths as cutting edge trajectories on 3D surface topography machined by peripheral milling. First, the cutter parallel axis offset and location angle are considered, which change the location of the ellipse center and intersection point of the cutting edges. Then, through the proposed model, the predicted surface topography is obtained, and the factors that affect the development tendency of roughness are analyzed. Next, the effects of the cutter location position (CLP) geometric parameters, cutter parallel axis offset and curvature on the roughness are evaluated by a numerical simulation. Finally, machining tests are carried out to validate the model predictions, and the results show that the surface topography predictions correspond well with the experimental results.     

燃烧固体药柱内腔表面的典型裂纹及其力学行为

根据燃烧环境中高装填固体推进剂药柱内应力的分布特征,提出了药柱内腔表面的两种典型裂纹, 即横向表面裂纹和纵向表面裂纹, 并分别采用方坯药柱和圆盘药柱表面预制的裂纹进行了模拟。比较燃气作用下两种药柱的有限元分析结果, 明确了挤裂模式对于燃烧环境中固体药柱表面裂纹问题的适用性。这些结论与实验观测现象非常吻合, 对实际发动机工作环境中固体药柱表面裂纹的力学行为预示和故障分析有着重要的指导意义。     

三维表面微观形貌的表征参数和方法

近几年,由于计算能力、速度和图像、数据处理技术的不断提高,极大地推进了３Ｄ表面微观形貌测量仪的实用化和商品化,同时也增加了研究者对３Ｄ分析的兴趣。总结了近期文献中出现的３Ｄ分析方法和表征参数,如：基准表面、图形（ 像） 表征、参数表征以及Ｍｏｔｉｆ 和分形表征方法,旨在促进我国对３Ｄ表面研究的发展。最后提出了３Ｄ表征技术的任务和发展方向。     

微重力环境下的表面张力及无接触测量

表面张力是材料重要的物理化学参数之一, 尤其在微重力条件下, 由表面张力引起的科学现象一直备受关注. 静滴法是地面重力条件下进行熔体表面张力测量的主要方法, 该方法的测量结果精确, 但在微重力环境下该法应用尚存在一些问题. 本文基于对表面张力理论的思考, 阐述了对其测量方法的认识和见解, 并讨论了地面上采用静滴法对熔体的表面张力进行测量研究以及静滴法在微重力条件下应用的困难. 进而介绍了利用悬浮技术进行熔体表面张力测量的无接触测量方法, 特别介绍了电磁悬浮法, 该法避免了由于容器接触带入杂质所引起的误差, 尤其在微重力条件下消除了重力的影响, 测量精度得到显著提高.      

Thermomechanical coupling effect on characteristics of oxide film during ultrasonic vibration-assisted ELID grinding ZTA ceramics

Ultrasonic vibration-assisted ELID (UVA-ELID) grinding is utilized as a novel and highly efficient processing method for hard and brittle materials such as ceramics. In this study, the UVA-ELID grinding ZTA ceramics is employed to investigate the influence of thermomechanical loading on the characteristics of oxide film. Based on the fracture mechanics of material, the model of internal stress for oxide film damage is proposed. The thermomechanical loading is composed of mechanical force and the thermal stress generating from grinding temperature. The theoretical model is established for the mechanical force, thermal stress and internal stress respectively. Then the finite element analysis method is used to simulate the theoretical model. The mechanical force and grinding temperature is measured during the actual grinding test. During the grinding process, the effect of grinding wheel speed and grinding depth on the thermomechanical force and the characteristics of oxide film is analyzed. Compared with the conventional ELID (C-ELID) grinding, the mechanical force decreased by 25.6% and 22.4% with the increase of grinding wheel speed and grinding depth respectively, and the grinding temperature declined by 10.7% and 12.8% during the UVA-ELID grinding. The thermal stress in the latter decreased by 16.3% and 20.8% respectively, and internal stress reduced by 12.3% and 15.6%. It was experimentally found that the topographies of oxide layer on the surface of the wheel and the machined surface in the latter was better than that in the former. The results indicate that the action of ultrasonic vibration establish a significant effect on the processing. Subsequently, it should be well considered for future reference when processing the ZTA ceramics.     

Effect of ultrasonic vibration on finished quality in ultrasonic vibration assisted micromilling of Inconel718

Inconel718 was machined with the traditional micromilling (TMM) and ultrasonic vibration assisted micromilling (UVAMM) with the different technology parameters, whose surface quality and burrs formation were studied. The results show that TMM often forms pits, bumps and gullies in the size effect range. UVAMM effectively improves the surface quality compared with TMM. The surface defects are significantly reduced with the increase of feed per tooth (ƒ_z). When ƒ_z exceeds 4 μm, the effect of ultrasonic vibration on the surface quality is no longer obvious. The minimum burr size on the down milling side and the up milling side are 50.23 μm and 36.57 μm, respectively. The feasibility of vibration cutting in improving surface quality and suppressing burr size was verified. UVAMM effectively suppresses the formation of built-up edge, which can significantly improve the micromilling process. The cutting force is obtained through simulation and experiment. They are agreement in the change trend. The finite element simulation can be used to predict the cutting force. Compared with TMM, feeding force (F_x), radial force (F_y) and axial force (F_z) of UVAMM decrease by 7.6%, 11.5% and 1.3%, respectively.     

表面张力贮箱推进剂管理装置设计进展

推进剂管理装置是表面张力贮箱的核心部件。文章简要介绍了推进剂管理装置技术概况 ,综述了当前推进剂管理装置技术设计的进展情况 ;从使命需求、可靠性、长寿命、试验要求、系列化五个方面总结了已经获得应用的先进的推进剂管理装置技术设计 ,并结合具体实例进行了说明和评述。     

复合纳米自润滑金刚石砂轮磨削SiC陶瓷的试验研究

提出一种复合纳米自润滑金刚石砂轮的制备方法,并对制备的砂轮进行SiC陶瓷的磨削试验,分析砂轮表面不同质量分数的复合纳米颗粒对磨削性能的影响。使用MoS₂、TiO₂纳米颗粒作为自润滑砂轮基底的填充材料,采用复合纳米自润滑金刚石砂轮和传统金刚石砂轮进行磨削对比试验,研究复合纳米自润滑金刚石砂轮的润滑机制。研究结果表明,复合纳米自润滑金刚石砂轮自释放的纳米颗粒有效地参与了磨削区间的润滑,砂轮的法相力、切向力降低,提升了工件表面质量。在磨削深度为2～8μm内,复合纳米自润滑金刚石砂轮的具体表现为法向磨削力降低18.6%～38.7%、切向磨削力降低11.2%～28.6%,工件表面粗糙度降低13.9%～41.5%。根据本试验所得数据,当砂轮表面复合纳米颗粒质量分数为8%时,润滑性能和工件表面质量最佳。