The double-pulsar binary J0737–3039

A recent multibeam pulsar survey of the outer Galactic plane at Parkes has discovered the first-known double-pulsar binary, a very compact double neutron star system in which both stars are observable as radio pulsars. In this review, we briefly describe the discovery and the studies which have been enabled by the unique properties of the system. These range from the most precise confirmation yet of the theory of general relativity, with the possibility of even more new tests and the measurement of second-order post-Newtonian effects, to studies of the magnetospheres and emission properties of the two pulsars. The discovery also results in a significant increase in the expected rate of occurrence of the mergers of double neutron star systems, and hence the rate of detection of such events by the new ground-based gravitational wave detectors.     

Reconstructed 3-d magnetic field structure and hard X-ray two ribbons for 2000 Bastille-day event

The Bastille-day event in 2000 produced energetic 3B/X5.6 flare with a halo CME, which had great geo-effects consequently. This event has been studied extensively and it is considered that it follows the two-ribbon flare model. The flare/CME event was triggered by an erupting filament and TRACE observations showed formation of giant arcade structures during the flare process. Hard X-ray (HXR) two ribbons revealed for the first time in this flare event (Masuda et al., 2001). The reconstruction of 3-D coronal magnetic fields revealed a magnetic flux rope structure, for the first time, from extrapolation of observed photospheric vector magnetogram data and the flux rope structure was co-spatial with portion of the filament and a UV bright lane (Yan et al., 2001a, 2001b). Here we review some recent work related to the flux rope structure and the HXR two ribbons by comparing their locations and the flux temporal profiles during the flare process so as to understand the energy release and particle accelerations. It is proposed that the rope instability may have triggered the flare event, and reconnection may occur during this process. The drifting pulsation structure in the decimetric frequency range is considered to manifest the rope ejection, or the initial phase of the coronal mass ejection. The HXR two ribbons were distributed along the flux rope and the rope foot points coincide with HXR sources. The energy dissipation from IPS observations occurred within about 100 R _⋅ is consistent with the estimate for the flux rope system. This revised version was published online in August 2006 with corrections to the Cover Date.     

一个简单有效的磁记录纠错系统

介绍一种简单有效的纠错编码方法 ,用于资源卫星高密度数字磁记录器 ,使误码率由 10 -6降低到 10 -11,同时介绍它的基本工作原理、实现方案及试验结果。     

用Visual FoxPro进行动态界面的设计

本文介绍用 Visual FoxPro的定时器。标签、按钮等控件和控件的属性、方法、事件等在界面上设计动态字幕、动态按钮等若干动态效果的方法。     

FY-2气象卫星在轨管理工程测控关键技术(上)

介绍了风云二号(FY—2)地球静止轨道自旋气象卫星工程测控的关键技术。分析了位置保持、姿态确定、星蚀和日凌的原理，给出了位置保持、姿态控制策略和地影、月影、日凌预报算法。并提出了一种检验定姿结果正确性的方法，提供了相应的工程计算参数。这些策略都已成功地用于FY—2卫星的在轨管理工程测控。     

ZN3火箭姿态测量用太阳角计

本文给出了用于ＺＮ３火箭姿态测量太阳角计的原理和测量结果，讨论了背景抑制和标定方法，分析了误差来源。该仪器采用选取适当探测波段和比值测量方法较好地消除了地外太阳辐照和大气消光的影响，也有效地抑制了背景辐射的干扰，大大提高了测量精度。实测结果表明，火箭姿态角测量的均方根误差约为０．７°。这一方法适用于各种自旋稳定飞行器的姿态测量。     

卫星抗辐射加固技术

分析了FY－1C卫星运行轨道空间辐射环境，介绍了整星、单机、器件抗辐射要求。卫星研制过程中，对各单抗和系统在技术设计、元器件设计、软件编制等的抗辐射加固设计要求。特别对有CPU和存储器的单粒子翻转效应（SEU）和闩锁效应（SEL）试验。仪器和系统的软件均用故障注入的方法完成了抗SEU的仿真试验。     

斜切反喷管流场的数值模拟

为了在级间分离期间提供反推力，许多固体火箭发动机前端都装有一组斜切反喷管。由于反喷管的气动型面具有许多尖点，并且在超声速区有一个台阶，喷管内存在一系列激波，而且亚声速区和超声速区互相混杂。本文用时间相关法数值模拟了反喷管流场，控制议程用Ｍａｃ Ｃｏｒｍａｃｋ显格式求数值解，边界参数采用物理边界条件和从双特征线方法推导来的有效的特征方法为计算，为于固壁边界点，在不同的区域采用不同的方法对计算方程组求     

中国地区MAGSAT卫星标量和矢量磁异常图

使用MAGSAT卫星资料,编绘中国及邻近地区的卫星磁异常图(10°N—60°N,70°E—140°E)。为了提取地壳异常场,必须从观测资料中消除主磁场、磁层场,感应场和电离层场。本文选用GSFC(12/83)地磁场模型,消除主磁场,磁层场和感应场。为了进一步消除电离层场的影响,改善相邻轨道磁异常的一致性,用纬度的二次多项式拟合每一条轨道的初始地壳异常,并从初始地壳磁异常值减去这一拟合值,从而获得最后的地壳异常值(△X,△Y,△Z,△F)。把研究地区分成1°×1°的网格,将每个网格内的磁异常进行平均,以获得网格中心点的异常值。根据这些网点值绘制中国及邻近地区的卫星标量和矢量磁异常图。等值线间隔为2nT。为了检验卫星磁异常图的可靠性,将卫星资料分成黎明组、黄昏组和联合组,分别进行处理和绘制卫星磁异常图。结果表明:根据上述资料绘制的卫星磁异常图有很好的一致性。中国地区的卫星磁异常值位于—10nT—10nT。卫星磁异常与区域构造特征有较好的一致性;塔里木地台、扬子地台和中朝地台是正磁异常区,西藏高原是负磁异常区。卫星磁异常反映出下地壳磁化强度的横向不均匀性。     

强场脉冲充磁退磁装置

介绍了充电电容器通过磁路瞬时放电产生强磁场的原理 ,选择回路参数可实现高矫顽力类永磁材料的充磁或者退磁 ,介绍了所研制的脉冲充磁退磁装置的性能。