Design and optimization of a novel electrically controlled high pressure fuel injection system for heavy fuel aircraft piston engine

The heavy fuel compression ignition engines are widely equipped as aircraft piston engines. The fuel injection system is one of the key technologies that determines the performance of engine. One of the main challenges is to precisely control the injected fuel quantity and flow rate in the presence of pressure fluctuation. This challenge is even more serious for heavy fuel. An original design for electrically controlled high pressure fuel injection system called Multi-Pumppressure-reservoirs fuel injection System(MPS) was demonstrated to reduce the pressure fluctuation and help keep injection stable. MPS was compared with an ordinary high pressure Common Rail fuel injection System(CRS). This work established one-dimensional AMESim and mathematical models for both CRS and MPS to study the effect of different structures and geometric parameters on the pressure fluctuations. The calculations show that the average fuel pressure fluctuation of MPS can be reduced by 57% for the crankshaft speed of 1900 r/min, and the pressure fluctuation before injection reduced by 100%. It is concluded that the pressure performance of MPS is less sensitive to pressure reservoir volume than that of CRS, and there is an opportunity for further volume reduction.     

基于FMI的飞行器分系统多源异构模型一体化仿真

针对飞行器设计领域各个分系统独立建模设计,产生的多源异构模型难以进行联合数学仿真的问题,提出了采用FMI构建多源异构模型的通用通信接口,从FMU模型封装与联合仿真两方面,给出了一种一体化仿真平台解决方案。以实际项目为背景,验证了平台的兼容性和扩展性。为控制专业的设计工作提供了新的平台,解决了各分系统研发单位之间模型级交流的困难与障碍。同时使控制专业设计人员仅需要了解分系统原理,而无需完全细致了解模型内部结构甚至自行建模,就可以进行设计验证工作,缩短了产品研制周期。     

基于S型测试工作量函数的软件可靠性增长模型

软件测试工作量随时间的变化情况对于软件可靠性增长曲线的形状具有显著影响,因此将测试工作量函数(TEF,Testing Effort Function)引入软件可靠性增长模型(SRGM,Software Reliability Growth Model)中以提高软件可靠性评估性能.分析了软件结构特征及学习因素对实际测试过程的综合影响,研究增长速率为先增后减的S型增长趋势的TEF,提出两种S型TEF,即延迟S型TEF与变形S型TEF,并提出考虑延迟S型TEF的SRGM(DSTEF-SRGM)以及变形S型TEF的SRGM(ISTEF-SRGM).在两组真实失效数据集上,进行了这两种SRGM与经典SRGM及其它考虑TEF的SRGM的对比研究.结果表明,ISTEF-SRGM的模型拟合效果最优,同时验证了该模型具有优越的软件可靠性评估性能及模型适应性.      

超声速复杂流动中湍流模型的性能评估

对8°,16°,20°,24°超声速二维压缩拐角进行了数值模拟,系统评估了SA(Spalart-Allmaras), k-ω, SST(Shear Stress Transport)3种工程常用湍流模型对激波/边界层干扰复杂流动的模拟适用能力.对于"弱"干扰、小分离,工程常用湍流模型能够较准确地预测其压力、摩擦力、热流分布,而对于"强"干扰、大分离则会造成较大的偏差.同时,随着分离区的增大,各湍流模型的适用性能差别更加明显,数值方法也有一定的影响.      

高超声速飞行器后体/尾喷管优化设计

结合试验设计方法、替代模型技术和遗传算法构建一套改进的优化方法,并将其应用于高超声速飞行器后体/尾喷管的一体化设计.在构建优化方法时,针对替代模型采用渐近全局策略提高精度;针对遗传算法,采用实数编码、多目标定级排序和改进小生境技术.在后体/尾喷管的一体化设计应用中,结合高精度的计算流体力学(CFD,Computational Fluid Dynamics)求解,以两个设计点的推力和升力为目标,以力矩为约束,得到优化问题的Pareto最优前沿面,优化结果在综合性能方面有很大提升.该优化方法可进一步推广应用于更复杂的优化设计当中.      

典型卫星轨道的位移损伤剂量计算与分析

位移损伤剂量是评估电子元器件在轨发生位移损伤导致性能退化的重要参数。文章首先给出了位移损伤剂量的等效原理和计算方法,即用位移损伤等效注量来表征卫星轨道带电粒子导致的位移损伤剂量;之后分别采用3种不同的太阳质子注量模型,计算了典型大椭圆轨道的位移损伤等效注量,并结合计算结果对不同模型的特点和适用性进行了分析;其后针对4种典型卫星轨道,计算了不同飞行寿命期内的位移损伤等效注量,发现不同轨道的位移损伤剂量有较大差异,并结合空间带电粒子辐射环境分布特点及卫星轨道参数等分析了差异的产生原因;最后,分析不同的太阳质子注量预估方法对位移损伤剂量计算结果的影响,总结了不同轨道、不同飞行寿命情况下卫星经受的带电粒子辐射环境的严酷程度。研究结果可为卫星内部元器件位移损伤效应防护工作提供参考。     

Modified energy cascade model adapted for a multicrop Lunar greenhouse prototype

Models are required to accurately predict mass and energy balances in a bioregenerative life support system. A modified energy cascade model was used to predict outputs of a multi-crop (tomatoes, potatoes, lettuce and strawberries) Lunar greenhouse prototype. The model performance was evaluated against measured data obtained from several system closure experiments. The model predictions corresponded well to those obtained from experimental measurements for the overall system closure test period (five months), especially for biomass produced (0.7% underestimated), water consumption (0.3% overestimated) and condensate production (0.5% overestimated). However, the model was less accurate when the results were compared with data obtained from a shorter experimental time period, with 31%, 48% and 51% error for biomass uptake, water consumption, and condensate production, respectively, which were obtained under more complex crop production patterns (e.g. tall tomato plants covering part of the lettuce production zones). These results, together with a model sensitivity analysis highlighted the necessity of periodic characterization of the environmental parameters (e.g. light levels, air leakage) in the Lunar greenhouse.     

隐式耦合求解燃烧室内喷雾两相流场

在任意非结构网格下,采用开源程序对某型涡喷发动机环形燃烧室内的喷雾燃烧过程进行数值模拟.首先选用k-ε双方程模型、EBU(eddy break up)-Arrhenius紊流燃烧模型、颗粒随机轨道模型等模拟流场中的物理过程.然后用隐式耦合算法求解气相流动、拉格朗日方法跟踪液滴相在流动区域的运动,并考虑气相与液滴相的完全双向耦合作用.仿真实验得到的 燃烧室内温度分布、马赫数分布、速度分布、压力分布均较合理,温度分布与文献中的基本一致,这表明隐式耦合方法能够较好地模拟燃烧室内流场,反映其内部流动特点.      

交互式多模型粒子滤波优化重采样算法

针对标准交互式多模型粒子滤波(IMMPF)算法中存在粒子退化及多样性匮乏问题,提出了交互式多模型粒子滤波优化重采样(IMMPFOR)算法,利用线性优化理论改善模型中具有小权值的粒子精度。该算法的新颖性体现在给定量测信息条件下,利用线性优化方法及模型交互概率将每个模型中拥有小权值的粒子替换成新的粒子。新的粒子既包含本模型中粒子信息,又包含了本模型与其他模型交互后的粒子信息。目标跟踪的仿真结果证明:每个模型新产生的粒子集合可以准确地近似真实状态后验概率密度函数,系统的估计精度与标准IMMPF算法相比有较大提升。     

交叉航路飞行间隔安全评估研究

在交叉航路上初步研究了碰撞风险模型,从冲突区域模型、概率论模型、Event模型、Reich及其改进模型等5种碰撞风险模型的角度,分析了各个模型的使用范围及建模思想,并在此基础上分析了飞行间隔安全评估未来的研究方向：基于CNS性能的飞行间隔安全评估,防撞系统如何减少碰撞风险以及人为因素对碰撞风险的影响,为今后的研究奠定了基础。