基于Fibonacci搜索方法的航空发动机性能寻优

介绍了Fibonacci搜索方法应用于发动机性能优化中的原理,建立带两个出口面积、气流马赫数可变的引射器的涡喷发动机的总体性能计算模型,应用Fibonacci搜索方法在优化参数区间内对该发动机进行了最大推力、最低油耗、最低涡轮前温度模式的寻优.举例说明了Fibonacci搜索方法应用的具体过程.给出了不同高度、马赫数下的寻优结果.结果表明:最优目标性能满足的约束边界与飞行高度、马赫数密切相关.不同的飞行高度、马赫数对应了不同的最优控制策略.但不论飞行任务如何,根据该方法进行的优化控制所获得的目标性能是最佳的.该优化方法不仅适用于该类涡喷发动机,也为其他类型航空发动机的优化控制打下一定的基础.      

燃料分级对旋流火焰的动态特性影响研究

为深入研究分级旋流火焰特性,以分级旋流模型燃烧室为研究对象,对四个不同燃料分级比(Rf)条件下的分级旋流火焰进行了数值研究,在时均燃烧场特性分析的基础上进一步对燃料分级比为1和3两个工况进行了基于壁面建模的大涡模拟(WMLES)研究。结果表明:燃料分级比的改变会影响中心回流区(CRZ)的长度和宽度。燃烧室中截面的散点分布图能够显示出不同燃料分级比条件下的燃烧特征。燃料分级比为1时,燃烧室剪切层仅存在零散的涡破碎区;而燃料分级比为3时,伴随涡破碎区还出现了单螺旋分支进动涡核(PVC)。通过FFT变换获得的燃烧室内剪切层速度能谱主频与进动涡核的旋转频率相同,表明内剪切层速度脉动的产生与进动涡核有关。另外进动涡核会使流场内的燃料分布和燃烧模式发生周期性的变化,进而影响燃烧过程。调整燃料分级比在1附近,能够使分级火焰达到稳定燃烧降低排放的目标。     

基于离散粒子群算法的航空发动机总装工艺优化方法

为了提高航空发动机总装工作的效率与质量,加强对总装工序和总装机件的管控,量化不同总装人员工作任务量,提高发动机总装的一致性和可追溯性,提出了1种发动机总装分区优化方法。以改进的2进制粒子群算法为基础,平衡了发动机总装各区域的工作内容,最小化各总装区域的工作差异,增强了每个区域装配机件的关联度,提高了总装工作的并行度,从而提高了装配质量。以某型发动机总装区域划分工作为实例,通过上述算法进行了总装区域划分,量化了所有装配区域每一工序的具体装配内容,减小了不同装配区域间的机件差异,杜绝了缺件、剩件等装配问题。     

Optimization and verification of free flight separation similarity law in high-speed wind tunnel

Based on the similarity of separation time, a similarity law optimization method for high-speed weapon delivery test is derived. The typical separation state under wind load is simulated by the numerical method. The real separation data of aircraft, separation data of previous test methods, separation data of ideal wind tunnel test of previous methods, and simulation data of the proposed optimization method are obtained. A comparison of the data shows that the method proposed can improve the performance of tracking. Similarity law optimization starts with the development of motion equations and dynamic equations in the windless state to address the problems of mismatching between vertical and horizontal displacement, and to address the problems of separation trajectory distortion caused by insufficient gravity acceleration of the scaling model of existing light model. The ejection velocity of the model is taken as a factor/vector, and is adjusted reasonably to compensate the linear displacement insufficiency caused by the insufficient vertical acceleration of the light model method, so as to ensure the matching of the vertical and horizontal displacement of the projectile, and to improve the consistency between the test results of high-speed projection and the actual separation trajectory. The optimized similarity law is applicable to many existing free-throwing modes of high-speed wind tunnels. The optimized similarity law is not affected by the ejection velocity and hanging mode of the projectile. The optimized similarity law is suitable not only for the launching of the buried ammunition compartment and external stores, but also for the test design of projectile launching and gravity separation.     

基于拓扑优化和形状优化的桨叶结构设计

直升机旋翼桨叶剖面结构设计是研究旋翼动力学设计的基础。提出一种联合拓扑优化和形状优化的 两级优化设计方法,可用于桨叶剖面结构的设计。第一级优化以变密度法(SIMP)作为拓扑优化的材料插值方 法,以桨叶体积最小化为设计目标,约束桨叶节点位移和应力,建立桨叶的拓扑优化求解模型;第二级优化以重 构的桨叶模型为基础开展形状优化,降低局部应力集中以及找到合理的边界节点位置。对优化后的模型进行 有限元分析,结果表明:通过拓扑优化和形状优化的两级优化,能够得到满足强度和稳定性要求的结构布局,为 桨叶结构设计提供指导方案。     

汽车双横臂独立悬架参数优化与仿真研究

针对国内某轿车双横臂独立悬架系统，运用ADMAS／View模块建立了双横臂式悬架模型，利用ADMAS／Insight模块对建立的双横臂式独立悬架进行了优化分析。优化结果分析表明：通过悬架参数优化设计，使前悬架性能有了较大的提高。     

Mechanism parameters optimization of bionic frog jumping robot based on velocity directional manipulability measure

以速度方向可操作度作为跳跃性能的评价指标,从机构设计角度寻求改善仿蛙跳跃机器人跳跃性能的方法.在仿蛙跳跃机器人机构模型的基础上,建立了起跳阶段的运动学方程,得到机器人从关节空间到质心运动空间的速度映射关系,结合速度方向可操作度,利用优化算法对仿蛙跳跃机器人的机构参数进行优化,使机器人的跳跃性能达到最佳.优化结果表明,运用速度方向可操作度理论,对跳跃机器人机构参数进行优化研究是有效可行的.     

基于遗传算法的军事物流运输计划

针对军事物流运输中车辆装载和车辆路径的组合问题进行研究,建立车辆装载和车辆路径组合问题的目标优化模型。通过改进遗传算法对模型求解,得到了较为满意的结果,可以在满足多车型多品种货物配送约束的条件下,实现运输车辆最少、车辆满载率高、车辆运输路径最短的目标。     

Global aerodynamic design optimization based on data dimensionality reduction

In aerodynamic optimization, global optimization methods such as genetic algorithms are preferred in many cases because of their advantage on reaching global optimum. However, for complex problems in which large number of design variables are needed, the computational cost becomes prohibitive, and thus original global optimization strategies are required. To address this need, data dimensionality reduction method is combined with global optimization methods, thus forming a new global optimization system, aiming to improve the efficiency of conventional global optimization. The new optimization system involves applying Proper Orthogonal Decomposition (POD) in dimensionality reduction of design space while maintaining the generality of original design space. Besides, an acceleration approach for samples calculation in surrogate modeling is applied to reduce the computational time while providing sufficient accuracy. The optimizations of a transonic airfoil RAE2822 and the transonic wing ONERA M6 are performed to demonstrate the effectiveness of the proposed new optimization system. In both cases, we manage to reduce the number of design variables from 20 to 10 and from 42 to 20 respectively. The new design optimization system converges faster and it takes 1/3 of the total time of traditional optimization to converge to a better design, thus significantly reducing the overall optimization time and improving the efficiency of conventional global design optimization method.     

长矩形盒零件超塑性胀形工艺加载规律的优化

本文通过对长矩形盒零件的力学解析，得到了优化加载规律的数学表达形式。按此规律进行气压胀形，与恒压胀形实验结果相比，能有效地提高成形极限，并使厚度分布情况有明显的改善。