高超声速条件下星光传输模拟方法与仿真

以高超声速飞行器为研究对象,建立了高速流场下的星光传输模拟仿真方法,定性、定量地研究平台气动光学效应对星光导航的影响。采用基于k-ω/SST两方程湍流模型的雷诺平均法计算星敏感器安装在飞行器不同位置处（头部、中部和尾部）的外流场密度分布,进而得到流场的空间折射率分布。在此基础上,利用几何光学法计算星光由高速层流流场引起的光程差、点扩散函数、像偏移等光学传输效应,得出经过层流流场的星光降晰图。同时运用统计光学理论计算高速湍流流场引起的星光出瞳面的波像差、密度均方差、相位均方差、Strehl比等光学传输效应,得出经过湍流流场的星光降晰图。仿真结果与理论分析吻合,从而为研究星光在高超声速流场中传输的机理提供了可靠的技术手段。     

钢管混凝土柱极限承载力分析的分段合成法

在计算钢管混凝土受压构件弹塑性极限承载力的合成法基础上,提出了一种新的数值计算方法--分段合成法,计算假设仅包括平截面假设和考虑紧箍力影响的钢管混凝土的应力-应变关系,取消了原合成法中对柱变形曲线的假设,积分时不仅需要在截面上划分单元而且还需沿杆长划分单元,因而可考虑柱多个截面的平衡条件.与原合成法相比,该方法不仅适用于轴压构件和两端偏心距相等的偏压构件,而且还适用于两端偏心距不等的偏压构件的弹塑性极限承载力计算.利用提出的方法和程序,计算了圆形截面钢管混凝土轴压长柱、两端偏心距相等的偏压长柱以及两端偏心距不等的偏压长柱的弹塑性极限承载力,理论分析结果与文献中的理论结果和试验结果均吻合良好.     

Attitude Control Considering Variable Input Saturation Limit for a Spacecraft Equipped with Flywheels

A new attitude controller is proposed for spacecraft whose actuator has variable input saturation limit. There are three identical flywheels orthogonally mounted on board. Each rotor is driven by a brushless DC motor (BLDCM). Models of spacecraft attitude dynamics and flywheel rotor driving motor electromechanics are discussed in detail. The controller design is similar to saturation limit linear assignment. An auxiliary parameter and a boundary coefficient are imported into the controller to guarantee system stability and improve control performance. A time-varying and state-dependent flywheel output torque saturation limit model is established. Stability of the closed-loop control system and asymptotic convergence of system states are proved via Lyapunov methods and LaSalle invariance principle. Boundedness of the auxiliary parameter ensures that the control objective can be achieved, while the boundary parameter’s value makes a balance between system control performance and flywheel utilization efficiency. Compared with existing controllers, the newly developed controller with variable torque saturation limit can bring smoother control and faster system response. Numerical simulations validate the effectiveness of the controller.     

Analysis of data of “Clementine” and “KAGUYA” missions and “ULCN” and “KSC-1162” catalogues

In this paper an analysis of data coordinate systems from selenographic catalogues and space missions was carried out. The lunar macrorelief models were made on basis of the software package ASNI USTU using method of the spherical harmonic expansion. These models accurately describe the global features of the lunar figure. To construct these models the following sources of topographic information were used: “Clementine” and “KАGUYА” (Selena, Japan mission) missions, “KSC-1162” (Kazan selenocentric catalogue), “Kiev” (selenodesic catalogue), “SAI” (Chuikova (1975)), “Bills, Ferrari”, “ULCN” (The Unified Lunar Control Network 2005). Direct comparison hypsometric information “KSС-1162” catalogue data with “Clementine” mission was carried out. These researches confirmed a good agreement of the hypsometric information of compared systems. The normalized coefficients were obtained on basis of the hypsometric information expansion for eight sources. The displacement of the lunar center of mass (LCM) relatively to the lunar center of figure (LCF) was obtained by using topographic data selenodetical catalogues and space missions.     

基于非参数假设检验的程序缺陷定位方法

调查了西门子测试集中的程序失败用例的规模和谓词评估偏差的分布.结果表明,中心极限定理的前提和参数假设检验的假设条件无法得到普遍满足.所以,已有的基于参数假设检验的方法存在潜在的问题.针对这一现象,提出了基于非参数假设检验定位程序缺陷的方法.实验结果表明,该方法在非正态分布的样本集上仍具有较好的适用性,且在缺陷定位效率上优于已有的基于程序谓词的缺陷定位技术.同时比较了基于2种常用的非参数假设检验模型的缺陷定位方法的效率.一种方法基于Kolmogorov-Smirnov检验,另一种方法基于Cramér-von-Mises准则.比较结果表明,在西门子测试集上,基于Kolmogorov-Smirnov检验的方法在缺陷定位效率上优于基于Cramér-von-Mises准则的方法.     

Identifying areas of high economic-potential copper mineralization using ASTER data in the Urumieh–Dokhtar Volcanic Belt,Iran

This study investigates the application of spectral image processing methods to ASTER data for mapping hydrothermal alteration zones associated with porphyry copper mineralization and related host rock. The study area is located in the southeastern segment of the Urumieh–Dokhtar Volcanic Belt of Iran. This area has been selected because it is a potential zone for exploration of new porphyry copper deposits. Spectral transform approaches, namely principal component analysis, band ratio and minimum noise fraction were used for mapping hydrothermally altered rocks and lithological units at regional scale. Spectral mapping methods, including spectral angle mapper, linear spectral unmixing, matched filtering and mixture tuned matched filtering were applied to differentiate hydrothermal alteration zones associated with porphyry copper mineralization such as phyllic, argillic and propylitic mineral assemblages.     

空间碎片现状与清理

分析了空间碎片的严峻现状和空间碎片的10个来源,指出轨道碰撞是产生碎片最多的因素;介绍了空间碎片的观测方法、原理和观测系统的概况,包括正在兴建的观测系统——“空间篱笆”。最后,根据不同轨道高度和空间碎片的数量与大小,提出空间碎片清理原则、要求和9种清理方法。     

Aerodynamic design of tractor propeller for high-performance distributed electric propulsion aircraft

Aiming to maximize the aerodynamic performance of the Distributed Electric Propulsion (DEP) aircraft, a hybrid design framework which focuses on the aerodynamic performance of the propeller/wing integration has been developed and validated numerically. Variable-fidelity modelling for propeller aerodynamics has been used to achieve computational efficiency with reasonable accuracy. By optimizing the aerodynamic loading distributions on the tractor propeller disk, the induced slipstream is redistributed into a form that is beneficial for the wing downstream, based on which the propeller blade geometry is generated through a rapid inversed design procedure. As compared with the Minimum Induced Loss (MIL) propeller at a specified thrust level, significant improvements of both the lift-to-drag ratio of the wing and the propeller/wing integrated aerodynamic efficiency is achieved, which shows great promise to deliver aerodynamic benefits for the wing within the propeller slipstream without any additional devices.     

倾转旋翼飞行器发动机短舱 倾转角度 -速度包线分析

针对倾转旋翼飞行器过渡飞行中的变体、变速特点提出了一种确定倾转旋翼飞行器从直升机模式向固定翼飞机模式过渡的发动机短舱倾转角度-速度包线分析方法.该方法从低速段包线和高速段包线两方面开展研究,分析倾转过程中旋翼和机翼的气动力匹配关系,以机翼失速限制确定低速段的发动机短舱倾转角度-速度包线,以旋翼可用功率限制确定高速段的发动机短舱倾转角度-速度包线.最后以XV-15倾转旋翼飞行器为样机,计算分析其发动机短舱倾转角度-速度包线,并与XV-15的发动机短舱倾转角度-速度包线进行对比验证.结果表明,建立的倾转旋翼飞行器发动机短舱倾转角度-速度包线确定方法合理有效.