卫星接地方式的分析与思考

接地是卫星正常工作的基本要求之一,也是决定其EMC性能的关键因素,本文将介绍星上常用的几种接地方式及目前低压母线卫星上广泛使用的一种接地模式,进而结合国内外现状,提出一种高压母线下卫星的接地方案,最后通过具体案例来说明接地的重要性,以期引起航天科技工作者对这方面的更多关注.     

上面级天文导航恒星视位置计算方法研究

恒星视位置计算是上面级天文导航星库建立的基础。首先,在国际天文联合协会(IAU)工具箱的基础上,介绍了恒星视位置计算中的各个数学模型,并设计了视位置计算的算法;然后,对某些特定星表进行处理,获得相应恒星的标准星历信息,对这些恒星采用本文的视位置算法进行视位置计算;最后,将计算结果与专业的天文软件及中国天文年历进行比较,来验证本文视位置算法的精度。计算结果表明:本文提出的视位置算法具有较高的精度(0.03″级别),满足上面级天文导航的要求。另外,本文通过对视位置误差的分析,给出了各种误差因素对视位置计算精度的影响。     

激光跟踪仪在某型飞机制造中的应用研究

阐述了激光跟踪仪组成、测量原理及误差补偿方法。利用激光跟踪仪分别在某型飞机后机身总装、大部件对接和质量检测工位构建了空间测量系统。实现了部件装配平台运动闭环控制,完成了飞机大部件预总装动态调姿引导,对飞机部件装配质量进行了定量监控,大幅度提高了飞机装配效率和质量。     

Improvement of the GRACE star camera data based on the revision of the combination method

The new release of the sensor and instrument data (Level-1B release 02) of the Gravity Recovery and Climate Experiment (GRACE) had a substantial impact on the improvement of the overall accuracy of the gravity field models. This has implied that improvements on the sensor data level can still significantly contribute to arriving closer to the GRACE baseline accuracy. The recent analysis of the GRACE star camera data (SCA1B RL02) revealed their unexpectedly higher noise. As the star camera (SCA) data are essential for the processing of the K-band ranging data and the accelerometer data, thorough investigation of the data set was needed. We fully reexamined the SCA data processing from Level-1A to Level-1B with focus on the combination method of the data delivered by the two SCA heads. In the first step, we produced and compared our own combined attitude solution by applying two different combination methods on the SCA Level-1A data. The first method introduces the information about the anisotropic accuracy of the star camera measurement in terms of a weighing matrix. This method was applied in the official processing as well. The alternative method merges only the well determined SCA boresight directions. This method was implemented on the GRACE SCA data for the first time. Both methods were expected to provide optimal solution characteristic by the full accuracy about all three axes, which was confirmed. In the second step, we analyzed the differences between the official SCA1B RL02 data generated by the Jet Propulsion Laboratory (JPL) and our solution. SCA1B RL02 contains systematically higher noise of about a factor 3–4. The data analysis revealed that the reason is the incorrect implementation of algorithms in the JPL processing routines. After correct implementation of the combination method, significant improvement within the whole spectrum was achieved. Based on these results, the official reprocessing of the SCA data is suggested, as the SCA attitude data are one of the key observations needed for the gravity field recovery.     

长航时环境下高精度组合导航方法研究与仿真

研究了一种利用捷联惯导、星敏感器和北斗接收机进行长航时高精度组合导航的方法.对捷联惯导系统误差、星敏感器安装误差、北斗定位误差分别进行建模,将星敏感器输出的载体姿态角、北斗接收机输出的载体位置与捷联惯导输出的对应参数分别相减作为量测,推导获得组合导航量测方程.针对长航时环境下可能面临量测噪声统计特性的不确定问题,采用简化的Sage-Husa自适应滤波算法进行组合导航滤波设计.仿真结果表明,该组合导航方法的定位精度达到±11.86m,定姿精度达到±0.27′,并且对量测噪声统计特性的突变具有较强的鲁棒性.     

一种采用双视场星敏感器的飞行器姿态角快速、高精度测量方法

针对姿态经常机动的飞行器之间建立激光通信问题,研究了一种针对这种飞行器的姿态角高精度、快速测量新方法.这种姿态角测量方法采用一种由宽、窄两种视场组成的双视场星敏感器,并以0轨道飞行器应用为例进行了姿态角测量仿真:其中的宽视场用于识别北极星,窄视场用于跟踪北极星;通过对北极星方向矢量测量值与其理论值进行比较精确求出了偏航、俯仰和滚动三个姿态角.分析表明,姿态角的角分辨率小于1″;测量过程不需要耗时的星图数据库搜索,一帧图像就可以完成一次快速测量.     

一体化小型星敏感器

星敏感器是当前广泛应用于航天器姿态确定的高精度光学敏感器。小型化、低功耗、高实时性是现阶段星敏感器发展的共同特点。本文介绍了一种由我所研制的一体化小型星敏感器 ,包括主要技术指标、工作原理和系统组成等     

Modified gradiometer technique applied to Double Star (TC-1)

On TC-1 (Tan Ce 1), the equatorial spacecraft of the Double Star mission, a strong spin-synchronized magnetic interference from the solar panels was observed. In-flight correction techniques for spinning spacecraft that are based on minimizing spin tones in the spin-aligned component and in the magnitude of the ambient magnetic field are therefore not possible in this case. However, due to the fortunate situation that the spacecraft carries two flux-gate magnetometers on the same boom (at 0.5 m distance from each other), the spacecraft field effects could be removed from the spin-averaged data to achieve 0.2 nT relative accuracy, by using a gradiometer technique. Methodology and results are presented. The obtained accuracy allows the use of the data in multi-spacecraft studies together with the Cluster satellites.     

简化飞行控制律模型设计与应用方法研究

为了在战斗机总体设计中引入飞控系统对性能和品质的协调作用,提出了简化飞行控制律设计和验证的方法,并将其应用到飞机的选型过程中。首先针对飞机概念设计与初步方案设计阶段的特点,建立了适应飞机总体设计要求的简化飞行控制律模型;然后用最优二次型跟踪器和特征结构配置方法对飞机进行控制律设计,用神经网络方法进行调参设计;最后用等效系统拟配和Simulink数值仿真方法进行验证。通过算例说明上述方法是可行的,而且能够反映飞机总体飞行的特点,简单易行,因此可以为实际飞行控制律初步设计提供参考。     

一种结合角距特征的改进栅格星图识别算法

针对栅格算法易受邻域星点影响导致误匹配的问题,提出了一种结合角距特征的改进栅格星图识别算法。首先介绍了改进栅格算法的原理,其次设计了融合栅格识别模式和星角距识别模式的算法实现流程,最后开展了基于不同视角下的大视场仿真星图的算法试验验证和性能分析。结果表明,由于角距特征具有旋转不变性和不易受观测星邻域星点分布影响等特点,结合角距特征对失效观测星进行再匹配的改进栅格算法,在兼顾存储量需求小、运行速度快等优势的同时,识别率和鲁棒性也得到了提升,最高识别率可达98.88%,在位置噪声干扰以及缺失星干扰下,改进算法的识别率仍可保持在95%,说明算法鲁棒性强,具有较好的应用前景。