喷气燃料中微量悬浮物的过滤分离装置的研制

研制了喷气燃料中难分离微量悬浮物的过滤试验装置,通过标准试验手段来判断某喷气燃料中的悬浮物是否能够通过目前外场过滤系统过滤净化处理,减少目前普遍使用的用目视检查方法判断喷气燃料洁净度的误差。研制的标准滤芯满足设计要求。按照标准试验滤芯相似原理即过滤精度、流量和压差三方面相似设计的标准滤芯与小型滤芯和外场大滤芯效果相当,在5~9级范围内AbakusC颗粒计数仪测得的NAS1638污染度可以代替俄罗斯ПКЖ-904A颗粒计数仪测得的ΓOCT17216污染度。使用过滤试验装置有利于对喷气燃料质量管理和贮运过程中的洁净度进行科学评价。     

HB-2 high-velocity correlation model at high angles of attack in supersonic wind tunnel tests

Responding to a need for experimental data on a standard wind tunnel model at high angles of attack in the supersonic speed range, and in the absence of suitable reference data, a series of tests of two HB-2 standard models of different sizes was performed in the T-38 trisonic wind tunnel of Vojnotehnickˇi Institut(VTI), in the Mach number range 1.5–4.0, at angles of attack up to+30°. Tests were performed at relatively high Reynolds numbers of 2.2 millions to 4.5 millions(based on model forebody diameter). Results were compared with available low angle of attack data from other facilities, and, as a good agreement was found, it was assumed that, by implication, the obtained high angle of attack results were valid as well. Therefore, the results can be used as a reference database for the HB-2 model at high angles of attack in the supersonic speed range, which was not available before. The results are presented in comparison with available reference data, but also contain data for some Mach numbers not given in other publications.     

用于EMI测量接收机脉冲响应校准的标准脉冲信号产生方法

EMI测量接收机作为电磁兼容测试中的关键仪器应用越来越广泛,但目前该类仪器的脉冲响应校准所用的标准源完全依赖于进口,国内尚无可替代的标准脉冲信号产生器。介绍一种用于EMI测量接收机脉冲响应校准的标准脉冲信号产生方法,首先建立标准脉冲信号的参数模型并对其进行数值分析和仿真,验证其符合CISPR 16-1-1标准的要求,之后搭建实验系统,利用标准脉冲信号生成软件控制任意脉冲信号发生器输出标准脉冲信号并对其进行补偿修正,获得符合CISPR 16-1-1标准要求的标准脉冲信号,该信号可用于EMI测量接收机脉冲响应的校准。     

Estimates of vertical land motion along the southwestern coasts of Turkey from coastal altimetry and tide gauge data

The differences between coastal altimetry and sea level time series of tide gauges in between March 1993 and December 2009 are used to estimate the rates of vertical land motion at three tide gauge locations along the southwestern coasts of Turkey. The CTOH/LEGOS along-track coastal altimetry retrieves altimetric sea level anomalies closer to the coast than the standard along-track altimetry products. However, the use of altimetry very close to the coast is not found to improve the results. On the contrary, the gridded and interpolated AVISO merged product exhibits the best agreement with tide gauge data as it provides the smoothest variability both in space and time compared with along track altimetry data. The Antalya gauge to the south (in the Mediterranean Sea) and the Mentes/Izmir gauge to the west (in the Aegean Sea) both show subsidence while the Bodrum tide gauge to the south (in the Aegean Sea) shows no significant vertical land motion. The results are compared and assessed with three independent geophysical vertical land motion estimates like from GPS. The GIA effect in the region is negligible. The VLM estimates from altimetry and tide gauge data are in good agreement both with GPS derived vertical velocity estimates and those inferred from geological and archaeological investigations.     

高频大电压标准器

主要阐述了该标准器的基本原理,从理论上对结构补偿法进行了分析和数学推导,当R/Z_o=1.9～2.0之间时,具有最小的交直流差。设计了匹配的同轴热电转换标准器;进行了误差分析;给出了试验结果,说明该标准器交直流差的重复性和复现性是好的。     

卫星用半导体器件失效模式和机理分布

以中国空间技术研究院电子元器件可靠性中心1987～1990四个年度数百份失效分析报告为依据,得到卫星用半导体器件解剖前失效模式分布:逻辑失控占36.3%,开路占22.2%等;失效机理分布:铝腐蚀占1 6.3%,使用不当占14.6%等。该项研究以第一手数据首次全面、系统指出卫星用器件失效模式和机理。为卫星可靠性设计、优选器件厂及器件厂采取措施提供重要依据。     

国产工业摄影测量相机精度测评CSCD

专业的工业摄影测量相机作为摄影测量的基础,其成像质量对测量精度有着直接的影响。目前,国内的专业摄影测量相机的发展比较缓慢,且质量参差不齐,研究合适的测试方法对国内专业测量相机的精度进行测评已刻不容缓。以CIM-1相机为例,从坐标重复性、标准长度等方面对国内工业摄影测量相机的精度进行了分析研究。通过与目前国际上比较认可的INCA相机进行了实验对比,并对实验结果进行了分析评价,得到一些比较理想的结论。为我国工业摄影测量系统检定规程的制定提供参考依据。     

静电场仪校准系统的设计及仿真研究

静电场仪的精确校准对提高卫星在轨电场探测精度、保障卫星安全发射升空、精确预测雷电等具有重要意义。针对电场仪校准的需要,设计了平行极板电容式静态电场仪校准装置。利用三维电磁场仿真软件CST对标准静电场发生装置进行数值仿真,研究了校准箱内部及边缘处的静电场分布特点,分析标准极板直径和间距对边缘效应的影响,结合极板平行度对电场均匀性的影响分析,确定了校准过程中电场仪探头的最佳位置,实现静电场仪校准装置的最优化设计。     

Families of halo orbits in the elliptic restricted three-body problem for a solar sail with reflectivity control devices

Solar sail halo orbits designed in the Sun-Earth circular restricted three-body problem (CR3BP) provide inefficient reference orbits for station-keeping since the disturbance due to the eccentricity of the Earth’s orbit has to be compensated for. This paper presents a strategy to compute families of halo orbits around the collinear artificial equilibrium points in the Sun-Earth elliptic restricted three-body problem (ER3BP) for a solar sail with reflectivity control devices (RCDs). In this non-autonomous model, periodic halo orbits only exist when their periods are equal to integer multiples of one year. Here multi-revolution halo orbits with periods equal to integer multiples of one year are constructed in the CR3BP and then used as seeds to numerically continue the halo orbits in the ER3BP. The linear stability of the orbits is analyzed which shows that the in-plane motion is unstable while the out-of-plane motion is neutrally stable and a bifurcation is identified. Finally, station-keeping is performed which shows that a reference orbit designed in the ER3BP is significantly more efficient than that designed in the CR3BP, while the addition of RCDs improve station-keeping performance and robustness to uncertainty in the sail lightness number.     

标准压力源自校准方法探讨

当前以压力传感器为一次仪表组成的标准压力源,用软件实现自校准既可提高校准效率,又能提高仪器的性价比.对标准压力源的软件自校准方法进行了探讨.