基于边缘信息的灰度目标跟踪算法

提出了一种基于边缘信息的跟踪算法,其可以实现对剧烈变化的灰度目标的精确跟踪.首先,利用基于双同心圆窗口算子的非线性边缘检测算法得到高质量的边缘信息;其次,为了解决单一边缘特征空间不能充分表征目标的难题,提出了一种通过组合边缘图像构建特征空间的方法,以便为目标建模提供充分信息;再次,在构建的特征空间中使用核估计方法对目标进行建模;在目标定位阶段,利用Kalman滤波器对目标进行预估后,再由Mean Shift算法在预估位置邻近区域实现目标定位;最后,提出了一种基于形态学的动态模型更新策略,使得算法不仅可以获得精确的目标区域,还可以实现对目标尺寸和形状变化的自适应.实验结果表明,本算法不仅可以有效跟踪剧烈变化的灰度目标,而且跟踪窗口可以实现对目标尺寸和形状的自适应.      

四轴飞行器姿态监控系统设计

设计了一套四轴飞行器上位机监控系统。针对准确掌握四轴飞行器的实时姿态、位置等信息和对四轴飞行器进行精准控制两大核心问题,开发了由上位机实现四轴飞行器姿态数据采集、通信及控制等功能的监控系统。监控系统良好的功能设计和友好的人机界面使得用户能够准确掌握飞行器的飞行信息,从而能够更精准地控制四轴飞行器飞行姿态。实验验证,监控系统简单实用,性能稳定,精度高,使整个飞行系统抗干扰能力强,鲁棒性、稳定性好。     

基于星载毫米波顺轨-交轨InISAR的空间运动目标三维成像技术研究

研究了低信噪比情况下的星载毫米波顺轨/交轨In\|ISAR空间目标三维成像问题。由于传统的RD成像算法在目标尺寸较大和分辨率要求较高时不能取得较好的成像效果,故将波数域成像算法引入运动目标成像处理以获得高分辨率的二维图像,继而将顺轨/交轨三天线ISAR图像分别进行干涉处理,获得了目标上各散射点的三维位置。作为二维成像、图像配准等重要环节的基础参数,对低信噪比下的目标检测和三维运动参数估计进行了研究,分析了速度估计精度要求。最后,仿真结果表明了顺轨/交轨In-ISAR系统的有效性。     

计算机仿真椭圆钣金件拉深成形技术研究

应用PAMSTAMP数值模拟仿真功能,研究了不同压边力及分步成形对椭圆钣金件拉深成形的影响,解决了拉深成形过程中的缩颈及开裂缺陷,通过计算机仿真,获得了最佳的工艺参数和工艺流程。     

Onboard orbit determination using GPS observations based on the unscented Kalman filter

Spaceborne GPS receivers are used for real-time navigation by most low Earth orbit (LEO) satellites. In general, the position and velocity accuracy of GPS navigation solutions without a dynamic filter are 25 m (1σ) and 0.5 m/s (1σ), respectively. However, GPS navigation solutions, which consist of position, velocity, and GPS receiver clock bias, have many abnormal excursions from the normal error range for space operation. These excursions lessen the accuracy of attitude control and onboard time synchronization. In this research, a new onboard orbit determination algorithm designed with the unscented Kalman filter (UKF) was developed to improve the performance. Because the UKF is able to obtain the posterior mean and covariance accurately by using the second-order Taylor series expansion through the sampled sigma points that are propagated by using the true nonlinear system, its performance can be better than that of the extended Kalman filter (EKF), which uses the linearized state transition matrix to predict the covariance. The dynamic models for orbit propagation applied perturbations due to the 40 × 40 geo-potential, the gravity of the Sun and Moon, solar radiation pressure, and atmospheric drag. The 7(8)th-order Runge–Kutta numerical integration was applied for orbit propagation. Two types of observations, navigation solutions and C/A code pseudorange, can be used at the user’s discretion. The performances of the onboard orbit determination were verified using real GPS data of the CHAMP and KOMPSAT-2 satellites. The results of the orbit determination were compared with the precision orbit ephemeris (POE) of the CHAMP and KOMPSAT-2 satellites.     

Design and Optimization of 3D Radial Slot Grain Configuration

Upper stage solid rocket motors (SRMS) for launch vehicles require a highly efficient propulsion system. Grain design proves to be vital in terms of minimizing inert mass by adopting a high volumetric efficiency with minimum possible sliver. In this article, a methodology has been presented for designing three-dimensional (3D) grain configuration of radial slot for upper stage solid rocket motors. The design process involves parametric modeling of the geometry in computer aided design (CAD) software through...     

Process-condition-driven Automatic Location of Components

In order to reduce the development cycle of mechanical products and corresponding toolings, a large number of components are utilized in these structures. Accordingly, automatic location method for components is a key issue in the research on intelligent computer aided design (CAD) techniques. Integrated with the investigation into intelligent design techniques for aircraft manufacturing toolings, in-depth researches on this issue are conducted. Formalized automatic location principles, representative methods and implementation algorithms are proposed and established. First, several terms and their formalized representative methods including process condition, location base and location operator are defined. Second, computation modeling of components automatic location and methods of location transformation are proposed. Then, definition of base structure and some key algorithms for automatic location are introduced. These principles and algorithms are developed, applied and verified in research project “Jig Intelligent CAD (JigICAD) System”.     

无人直升机视觉着陆中的运动状态估计算法

对无人直升机(UH)视觉着陆中基于视觉图像处理的运动状态估计问题进行了研究。介绍了视觉着陆原理,分析了运动估计、特征图像处理与着陆控制间的关系,推导并建立了UH相对着陆平台位姿估计算法、线速度与角速度估计算法。相邻两帧图像对应特征点像点位置为位姿估计算法提供数据,一帧图像特征点像点位置及其对应像点平移速度为线速度与角速度估计算法提供数据。利用UH着陆控制仿真数据模拟UH着陆运动过程中像点位置及其对应平移速度的视觉图像处理结果。仿真验证了运动状态估计算法,结果表明所提出的运动状态估计算法能有效地利用视觉图像处理结果数据估计出UH的位置、姿态、线速度和角速度。     

复杂曲面件模具设计的计算机辅助系统开发

针对复杂曲面件及其模具设计,开发计算机辅助系统,借助该系统可使设计工作直观、方便、快捷。系统以UG为平台,综合运用UG/Open开发工具、Visual C++以及数据库知识而建立。经实践证明,系统运行良好,可以顺利完成该类零件及模具设计工作。     

初级教练机综合航电系统发展趋势

分析和总结了综合航空电子系统的发展历史和现状,以及我国航电技术水平发展状态,阐述了当前初级教练机航电系统存在的问题。对国外军用初I中级教练机、国外民用轻型飞机和国产初级教练机现状进行了分析,论述了初级教练机综合航空电子系统的发展趋势。