航天电子产品整机的装联布线

文章介绍了航天电子产品整机装联布线的原则、注意要点、方法、顺序及常见问题的处理。     

在大面积柔性基底上制备空间应用薄膜研究

简明讨论了在大面积柔性高聚合物基底材料上制备空间应用薄膜的特点与要求,并对研制的大面积自动连续镀膜设备的结构与性能作了简介;比较深入地探讨了大面积柔性基底材料连续镀膜中对磁控靶和等离子体辉光放电场的要求与作用;介绍了柔性导电型第二表面镜的研制技术、性能与评价方法及结果。     

THE DGW-I FURNACE A MATERIALS PROCESSING FACILITY IN "SZ-2" SPACECRAFT

The DGW-I is a new material processing facility developed in China, which was firstly carried into orbit in November 1999 by the SZ-1 spacecraft and then in January 2001 carried by SZ-2 into space again, and successfully processed 6 samples of materials, including 3 samples of alloys, 2 of semiconductors and 1 sample of oxide crystal.     

总剂量探测技术的空间应用

空间辐射对飞行器可造成辐射损伤甚至失效,对航天员的生命健康安全存在着威胁。随着航天活动的深入,对空间辐射探测技术的发展提出了更高的要求。通过辐射敏感场效应晶体管（RADFET）探测技术设计研制了总剂量探测器,介绍了探测器的设计原理和测试数据分析,以及研究发展方向和空间应用展望。     

天地一体化飞行器测控通信网络体系构建

空间信息综合应用是未来航天的发展趋势,引进网络化技术,打造天地一体化测控通信网是实现信息综合应用的必由之路.一体化测控通信网作为空间信息传输、分发的公共基础设施,将各类飞行器、地/海/空/天基测控站（接收站）及指控中心、测控中心、用户等都作为网中的标准节点,以实现测控通信任务统一指挥控制、飞行器态势综合显示、测控通信资源综合利用和可持续发展.从新时期航天科技的发展特点得出,空间网络化是必然发展趋势.总结了国内外航天网络化发展的研究成果,提出测控通信网络化的定义、未来体系结构以及实施步骤,设计了空间网络化飞行验证试验的基本方案,剖析了空间网络化体系构建的关键技术.     

激光功率密度对纳秒激光烧蚀冲量耦合影响的数值模拟

为研究激光功率密度对纳秒激光烧蚀冲量耦合影响,建立了一个复杂的一维热传导和流体动力学模型。以空间碎片常见材料Al为例,用建立的物理模型数值计算了纳秒脉宽激光烧蚀产生的冲量随时间变化情况,数值结果和已有的实验数据符合较好。数值计算表明:辐照的激光功率密度越高,发生等离子体屏蔽时间越早,等离子体屏蔽越明显,能量利用率越低;随着激光功率密度的逐渐增大,获得的冲量逐渐趋于稳定,冲量耦合系数降低,数值计算结果与Phipps的最优能量耦合规律一致。      

C/ SiC 材料在国外空间光学系统上的应用

C/SiC复合材料具有高的比强度、低的热变形敏感度以及在高低温环境下的适应性,这使其成为目前最具前途的空间光学系统应用材料.本文总结了国外一些国家C/SiC的制备方法及其在空间技术上的具体应用.     

Approaching control for tethered space robot based on disturbance observer using super twisting law

Approaching control is a key mission for the tethered space robot to perform the task of removing space debris. But the uncertainties of the TSR such as the change of model parameter have an important effect on the approaching mission. Considering the space tether and the attitude of the gripper, the dynamic model of the TSR is derived using Lagrange method. Then a disturbance observer is designed to estimate the uncertainty based on STW control method. Using the disturbance observer, a controller is designed, and the performance is compared with the dynamic inverse controller which turns out that the proposed controller performs better. Numerical simulation validates the feasibility of the proposed controller on the position and attitude tracking of the TSR.     

磁罗盘空间特性校准装置研究

磁罗盘在不同地磁场下使用的性能有差异，而常规手段只能对磁罗盘在实验室地磁场环境下的性能进行校准，所[JP2]以其校准结果在实际使用中是有风险的。介绍一种磁罗盘空间特性校准装置，主要由地磁场复现系统和三轴无磁转台组成，地磁场复现系统可模拟地球上不同经纬度和不同离地高度的地磁场，配合作为角度标准器的三轴无磁转台，对磁罗盘在地球上不同地磁场下的性能进行校准，确保磁罗盘在不同空间使用时的量值准确可靠。     

4D Lattice Flower Constellations

4D Lattice Flower Constellations is a new constellation design framework, based on the previous 2D and 3D Lattice theories of Flower Constellations, that focus on the generation of constellations whose satellites can have different semi-major axis and still present a constellation structure that is maintained during the dynamic of the system. This situation can arise when dealing with satellites with very different instruments, or when it is of interest to coordinate two different constellations. In that sense, 4D Lattice Flower Constellations constitutes the most general representation of the Flower Constellation formulation. In addition, the effects of the $J_2$ perturbation are taken into account in order to generate distributions that maintain their initial design configuration under this perturbation for longer periods of time with a low fuel budget. Finally, examples of application are presented, showing the possibilities in satellite constellation design of this new approach.