航天光学相机地面测控设备通用化研究

文章提出了航天光学相机控制系统测试设备通用化研究的思路，制定了通用化方案，对各功能模块进行了通用化设计。     

舱外活动系统述评

舱外活动（EVA）系统可分为3部分：1）航天员装备系统,包括舱外航天服（EVA航天服）、安全系绳和机动装置;2）空间支持系统,包括气闸、约束装置、EVA工具、在轨训练设施、遥控自动操作装置,以及表面运输工具;3）地面试验、训练与保障系统,包括减重／失重设施、热／真空试验舱、虚拟现实模拟系统、星体表面模拟场地,以及任务保障设施。文章阐述EVA系统的组成与功能,评述EVA技术现状及发展趋势。     

电离辐照诱发面阵电荷耦合器暗信号增大试验

针对电荷耦合器件(CCD)在空间轨道环境中应用时易受到辐射损伤的影响,对面阵CCD的电离辐照损伤效应问题进行了试验研究.首先,通过开展面阵CCD60 Co γ射线电离辐照效应试验,在暗场条件下测试了面阵CCD辐照后输出信号随积分时间的变化,并拟合计算出暗信号斜率.然后,对比分析了不同偏置条件下辐照后暗信号退化的试验规律;分析了不同偏置条件下辐照后暗信号的退火恢复情况;分析了不同积分时间、不同总剂量下的暗信号不均匀性的变化规律.最后,阐述了电离辐照损伤诱发面阵CCD暗信号增大的物理机制.结果表明:面阵CCD对电离辐照损伤很敏感,在进行航天器成像系统设计时,要充分考虑CCD受电离辐照损伤带来的影响.     

Signatures of strong geomagnetic storms in the equatorial latitude

Ionosonde data from two equatorial stations in the African sector have been used to study the signatures of four strong geomagnetic storms on the height – electron density profiles of the equatorial ionosphere with the objective of investigating the effects and extent of the effects on the three layers of the equatorial ionosphere. The results showed that strong geomagnetic storms produced effects of varying degrees on the three layers of the ionosphere. Effect of strong geomagnetic storms on the lower layers of the equatorial ionosphere can be significant when compared with effect at the F2-layer. Fluctuations in the height of ionization within the E-layer were as much as 0% to +20.7% compared to −12.5% to +8.3% for the F2-layer. The 2007 version of the International Reference Ionosphere, IRI-07 storm-time model reproduced responses at the E-layer but overestimated the observed storm profiles for the F1- and F2-layers.     

航天器深空飞行中的遥控问题

分析了航天器深空飞行中与遥控工作密切相关的信息传输时延,分析了遥控工作面对的控制实时性、控制精度、控制验证等方面的问题;从遥控工作的控制方式、发令工作模式、遥控工作机制、发令时间补偿等方面提出了解决思路。     

空间计量中长度单位和距离测量

长度单位定义是建立在光直线传播、光速在真空中为常数,以及光速各向同性的理论基础上,二维球面上的直线,在三维空间中是弯曲的测地线;三维空间的直线,在四维时空中也是弯曲的测地线。长度单位的定义是否适用四维时空呢？SI秒和SI米的定义适用于全域时空,但使用它们必需明确原时和坐标时的区别。爱因斯坦的狭义相对论以及光速不变原理只适用于惯性系,不适用于非惯性系。本文以转盘上的非惯性坐标系为例,利用广义相对论的坐标变换和时空度规运算,揭示了非惯性坐标系上的时空弯曲和光的非直线传播现象。计算了非惯性坐标系上Sagnac效应对卫星和地面站双向测距的影响,初步研究表明空间测量范围从局域推广到全域的话,诸如引力红移、相对速度效应、Sagnac效应等将会成为空间长度测量不确定度的影响因素,因此空间计量理论必须建立在广义相对论基础之上,用四维时空观念理解空间距离测量问题。     

Space time clock: An on-chip clock with 10-12 instability

High precision and stable clock is extremely important in communication and navigation. The miniaturization of the clocks is considered to be the trend to satisfy the demand for5G and the next generation communications. Based on the concept of meter bar and the principle of the constancy of light velocity, we designed a micro clock, Space Time Clock(STC), with the size smaller than 1 mm × 1 mm and the power dissipation less than 2 m W. Designed in integrated circuit of 0.18 μm technology, the in...     

Spacecraft survivability in the natural debris environment near the stable Earth-Moon Lagrange points

The theoretical analysis of the motion of natural space debris near the stable Earth-Moon Lagrange Points, $L_4$ and $L_5$, is presented with a focus on the potential debris risks to spacecraft operating near these points. Specifically, the research formulates a debris propagation model using four-body dynamics, then applies candidate probabilistic survivability models to a notional spacecraft operating at the $L_4$ and $L_5$ Lagrange points to quantify the collision risks to the spacecraft from natural debris particles. Of the survivability models implemented, the natural debris collision risks to spacecraft survivability are found to be incredibly low, but mitigation strategies to reduce the risk further are identified in this study. Overall, research into stable Lagrange point natural debris propagation improves understanding of the collision risks posed by the naturally occurring Kordylewski clouds and enhances operational planning for Lagrange point space missions.     

基于摄影测量技术的航天发动机装配过程几何参数测量方法研究

当前我国航天发动机装配过程几何参数的测量方法为专业人员操作激光跟踪仪或全站仪逐点位进行测量,此类方法存在测量效率低的缺点。针对此问题,提出了一种高效的基于摄影测量技术的航天发动机装配过程几何参数测量方法,对该测量方法的测量原理进行了介绍,详细说明了这一方法各测量环节实现的测量目的,最后通过实测数据计算工业数字摄影测量技术在此类应用中的系统准确度,证明了该测量方法的可行性。     

一种易于制造、较大视场离轴三反光学系统设计

介绍了离轴三反光学系统初始结构的设计方法,并用该方法进行离轴三反光学系统设计。用ZEMAX软件设计了一个焦距为1 000mm,F数为10,垂直轨道方向视场为±4.0°,沿轨道方向为6.0°和6.5°的光学系统。结果表明,该光学系统在空间频率71线对/mm处,调制传递函数均大于0.4,且三镜为球面,具有易于制造装调等优点。