Laser measurements to space debris from Graz SLR station

In order to test laser ranging possibilities to space debris objects, the Satellite Laser Ranging (SLR) Station Graz installed a frequency doubled Nd:YAG pulse laser with a 1 kHz repetition rate, a pulse width of 10 ns, and a pulse energy of 25 mJ at 532 nm (on loan from German Aerospace Center Stuttgart – DLR). We developed and built low-noise single-photon detection units to enable laser ranging to targets with inaccurate orbit predictions, and adapted our standard SLR software to include a few hundred space debris targets. With this configuration, we successfully tracked – within 13 early-evening sessions of each about 1.5 h – 85 passes of 43 different space debris targets, in distances between 600 km and up to more than 2500 km, with radar cross sections from >15 m² down to <0.3 m², and measured their distances with an average precision of about 0.7 m RMS.     

MIDACO on MINLP space applications

A numerical study on two challenging mixed-integer non-linear programming (MINLP) space applications and their optimization with MIDACO, a recently developed general purpose optimization software, is presented. These applications are the optimal control of the ascent of a multiple-stage space launch vehicle and the space mission trajectory design from Earth to Jupiter using multiple gravity assists. Additionally, an NLP aerospace application, the optimal control of an F8 aircraft manoeuvre, is discussed and solved. In order to enhance the optimization performance of MIDACO a hybridization technique, coupling MIDACO with an SQP algorithm, is presented for two of these three applications. The numerical results show, that the applications can be solved to their best known solution (or even new best solution) in a reasonable time by the considered approach. Since using the concept of MINLP is still a novelty in the field of (aero)space engineering, the demonstrated capabilities are seen as very promising.     

The effect of the space flight environment on mucin production in the mouse uterine tube

Numerous studies have indicated that the microgravity environment of space has harmful effects on several tissues throughout the body. Although this phenomenon is well documented, research in this area is still in its relative infancy. This study investigates the effects of space flight on mucin production of the uterine tubes of mice. This study examined the epithelium of the uterine tubes from female mice that were flown on the space shuttle Endeavour for 13 days in August, 2007 and their concomitant controls. The tissue was qualitatively analyzed for the type of mucin produced, i.e., acidic, neutral, acidic/neutral mixture. Further, the tissue was quantitatively analyzed for the amounts of mucins produced by measuring the thickness of the mucin layer for each region of the uterine tube: isthmus, ampulla, and infundibulum. One way ANOVA tests were used to compare mucin thickness between all three sets of animals. Results indicate similar but not identical results between the three regions of the uterine tube. The Baseline tissue had the thickest mucin layer regardless of treatment group. In the ampulla the mucin layer was the thinnest in the Flight tissue, followed by the Ground Control, with the Baseline being the thickest. Analysis of the mucin layer of the infundibulum of the three treatment groups indicated no difference in its thickness between the three regions of the uterine tube. These results indicate a trend toward thinning of the mucin layer of the uterine tube in space flight, but also indicate an influence by the housing environment.     

Heliotropic dust rings for Earth climate engineering

This paper examines the concept of a Sun-pointing elliptical Earth ring comprised of dust grains to offset global warming. A new family of non-Keplerian periodic orbits, under the effects of solar radiation pressure and the Earth’s J₂ oblateness perturbation, is used to increase the lifetime of the passive cloud of particles and, thus, increase the efficiency of this geoengineering strategy. An analytical model is used to predict the orbit evolution of the dust ring due to solar-radiation pressure and the J₂ effect. The attenuation of the solar radiation can then be calculated from the ring model. In comparison to circular orbits, eccentric orbits yield a more stable environment for small grain sizes and therefore achieve higher efficiencies when the orbit decay of the material is considered. Moreover, the novel orbital dynamics experienced by high area-to-mass ratio objects, influenced by solar radiation pressure and the J₂ effect, ensure the ring will maintain a permanent heliotropic shape, with dust spending the largest portion of time on the Sun facing side of the orbit. It is envisaged that small dust grains can be released from a circular generator orbit with an initial impulse to enter an eccentric orbit with Sun-facing apogee. Finally, a lowest estimate of 1 × 10¹² kg of material is computed as the total mass required to offset the effects of global warming.     

VHF radio response of the near Earth space during solar activity growth in October, 2003

The analysis of observations of very high frequency radio noise intensity at the middle latitude on a frequency f = 500 MHz from 14th till 26th of October, 2003 is presented. These data are compared with the solar radio bursts in the range of frequencies 1–14 MHz registered by RAD2 receiver of the WAVES device installed on board the WIND spacecraft.     

Finite element reconstruction approach for on-orbit spacecraft breakup dynamics simulation and fragment analysis

Breakup model is the key area of space debris environment modeling. NASA standard breakup model is currently the most widely used for general-purpose. It is a statistical model found based on space surveillance data and a few ground-based test data. NASA model takes the mass, impact velocity magnitude for input and provides the fragment size, area-to-mass ratio, velocity magnitude distributions for output. A more precise approach for spacecraft disintegration fragment analysis is presented in this paper. This approach is based on hypervelocity impact dynamics and takes the shape, material, internal structure and impact location etc. of spacecraft and impactor, which might greatly affect the fragment distribution, into consideration. The approach is a combination of finite element and particle methods, entitled finite element reconstruction (FER). By reconstructing elements from the particle debris cloud, reliable individual fragments are identified. Fragment distribution is generated with undirected graph conversion and connected component analysis. Ground-based test from literature is introduced for verification. In the simulation satellite targets and impactors are modeled in detail including the shape, material, internal structure and so on. FER output includes the total number of fragments and the mass, size and velocity vector of each fragment. The reported fragment distribution of FER shows good agreement with the test, and has good accuracy for small fragments.     

Preparation of the Biochip experiment on the EXPOSE-R2 mission outside the International Space Station

Biochips might be suited for planetary exploration. Indeed, they present great potential for the search for biomarkers – molecules that are the sign of past or present life in space – thanks to their size (miniaturized devices) and sensitivity. Their detection principle is based on the recognition of a target molecule by affinity receptors fixed on a solid surface. Consequently, one of the main concerns when developing such a system is the behavior of the biological receptors in a space environment. In this paper, we describe the preparation of an experiment planned to be part of the EXPOSE-R2 mission, which will be conducted on the EXPOSE-R facility, outside the International Space Station (ISS), in order to study the resistance of biochip models to space constraints (especially cosmic radiation and thermal cycling). This experiment overcomes the limits of ground tests which do not reproduce exactly the space parameters. Indeed, contrary to ground experiments where constraints are applied individually and in a limited time, the biochip models on the ISS will be exposed to cumulated constraints during several months. Finally, this ISS experiment is a necessary step towards planetary exploration as it will help assessing whether a biochip can be used for future exploration missions.     

LEO/MEO双层空间信息网中基于身份的群组密钥管理方案

由于空间信息网中结点的移动性,在空间信息网中实现传统的群组密钥管理面临许多困难.根据空间信息网的特点,分析了空间信息网中群组密钥管理方案的需求,设计了一个适用于LEO/MEO双层空间信息网络的群组密钥管理方案,采用基于身份的思想,消除了对证书系统的依赖,能在空间信息网中灵活高效地实现.将空间信息网中的结点根据其逻辑位置划分为簇,其中簇头为MEO卫星,在密钥交换阶段中共享密钥仅由所有簇头结点决定,这种机制大大减少了通信量.方案能有效抵抗外部攻击者,并且具有前向保密性和后向保密性.仿真实验表明,方案具有很高的通信效率.     

高动态环境下惯组辅助GNSS接收机卫星导航信号的捕获

针对高动态环境下多普勒频移超出了接收机的搜索范围接收机无法捕获卫星导航信号这一问题,提出了利用INS辅助GNSS接收机卫星导航信号捕获的方法.该方法利用INS提供的载体位置、速度信息,并结合通过卫星星历(或历书)得到的卫星位置、速度估算载波多普勒频移,利用估算的载波多普勒频移重新设定GNSS接收机载波搜索中心频率,使G...     

子带自适应阵列处理的实现与性能分析

针对空频自适应滤波处理中节拍样点两端的输出信干噪比急剧下降的问题,建立了子带自适应阵列处理与空时自适应阵列处理等效关系的数学模型,指出了变换正交基函数的影响,提出利用时频分析特性优良的小波包变换取代傅立叶变换形成新的子带自适应阵列处理,减少子带间的频谱混叠,从而提高系统节拍样点两端的输出信干噪比。对基于不同窗函数的空频自适应处理和基于小波包变换的子带自适应处理进行了性能仿真,验证了小波包相对于加窗空频自适应处理的优越性。