铝电解电容在湿热环境下的贮存可靠性

针对电子设备中的铝电解电容在贮存环境下的失效问题,通过对铝电解电容进行湿热贮存试验,考察了湿热环境引起的铝电解电容外观状态和电性能的变化,并对试验中出现的失效现象进行了分析.结果表明,铝电解电容在湿热环境下出现了引脚腐蚀和橡胶塞长霉的失效现象;环境温度对铝电解电容贮存可靠性有重要影响,温度超过40℃引脚腐蚀速度会大大加快.温度在30℃适宜霉菌生长,温度超过30℃后没有长霉现象.阳极箔上的阳极氧化膜被腐蚀是铝电解电容在湿热环境下出现电容量和漏电流增大的原因.     

海洋环境对吊放声纳作战使用影响研究

作战海域海洋环境对航空吊放声纳工作深度、探潜能力有重要影响。文中以声纳方程为基础,分析了作战海域海况、深度等海洋环境因素对吊放声纳作战使用及探测能力的影响,为合理使用吊放声纳提供了依据。     

战斗机综合热能管理系统稳态仿真

建立综合热管理系统稳态仿真数学模型,在SIMULINK软件平台上搭建仿真模块,对系统同一高度不同马赫数及同一马赫数不同高度进行了稳态仿真,得到系统中关键部件的进出口温度和流量,并分析了马赫数以及高度变化对各状态点温度的影响。分析得出马赫数增加各状态点的温度基本是增加的,只有燃油冷却出口温度先减后增;各状态点的温度随高度的增高基本是减小的,只有燃油冷却出口温度是增加的。     

Charging of dust grains by anisotropic solar wind multi-component plasma

In this paper we study the charging process of small grain particles by anisotropic multi-component solar wind plasmas (electrons, protons and heavy ions), versus two-component (electron/proton) plasmas. We are focusing attention on the important characteristics of the charging process, namely the charging time, floating potential and current content as functions of plasma parameters such as He⁺⁺/H⁺ (α/p) number density and T_α/T_p temperature ratios of alpha particles to protons, as well as plasma streaming velocity v₀. Measured statistical properties of solar wind plasma parameters at 1 AU show considerable variations in α/p-temperature ratios from 1 to 10, in α/p-number density ratio from 0.01 to 0.35, as well as in values of streaming velocity v₀ from 200 km/s to 1000 km/s and more. Periods of these variations could last for several days each, leading to significant variability in the charging process, according to newly derived general analytical expressions. Numerical calculations performed for protons/alphas plasmas showed large disparity in the charging characteristics. For example, in anisotropic plasma, grain charging time varies up to 90% depending on α/p-particles temperature and number density ratios, whereas changes in floating potential are up to 40%. In contrast, in isotropic plasma, charging characteristic for grains do not change very much for the same plasma parameters variations, with charging time varying about 12% and floating potential only varying about 4%. It is also shown that in highly anisotropic plasma, with all ballistic electrons and ions, dust grains could not hold their charges, and characteristic discharged time is calculated. We note that the analysis is equally applicable to any sized body immersed in solar wind plasma.     

Kinetic theory of sheath formation in solar wind plasma

We present a general self-consistent kinetic theory for plasma sheath formation in solar wind plasma. The theory could be applied to anisotropic, as well as to isotropic collisionless plasma without resorting to any simplifications, limitations, or assumptions, such as the necessary existence of a ‘pre-sheath’ region of ions acceleration to ensure the Bohm criterion. The kinetic framework is first applied to sheath formation around an arbitrary oriented planar absorbing surface, charged by solar wind anisotropic plasma, under the condition of negligible photoelectric effect. We then make use of our kinetic approach for the plane geometry in isotropic collisionless plasma, as a particular case of a planar electrode orientation parallel to plasma streaming velocity, also analyzing the sheath structure around spherical and cylindrical absorbing electrodes submerged in isotropic collisionless plasma. Obtained results demonstrate principal differences in spatial charge distributions in sheath regions between spherical or cylindrical electrodes of large size and an unbound planar surface submerged in isotropic plasma. In the case of a planar electrode, we directly compare results obtained in our kinetic and hydrodynamic theories and conventional hydrodynamic theory of plasma sheath formation. The outcome from the present study have direct implications to the analysis of plasma sheath structure and associated distribution in space of charged dust grains, which is relevant to the moon exploration near the optical terminator region or in shadowed craters in the moon.     

航天用SRAM型FPGA抗单粒子翻转设计

采用SRAM工艺的FPGA因其性能优异,在空间领域的应用受到重视;但是在空间环境中,SRAM型FPGA易受单粒子翻转的影响而导致逻辑故障或功能中断。文章提出对该类芯片的配置逻辑部分采用回读比较后刷新、对其BRAM部分采用通用自纠错宏的抗单粒子翻转（SEU）设计方案,在牺牲一定的器件性能的情况下,能达到较好的抗辐射效果。     

Space astronomy in China: 2008—2010

In 2008 to 2010, the main activities in Chinese space astronomy were focused on: fulfilling the long-term plan of Chinese space astronomy; initiating the long-term plan of Chinese space astronomy; undertaking some astronomical missions set by CNSA in ``Development Program of Space Science for 2006--2010'. This paper summarizes in brief all these activities.      

3DG111F等四种双极晶体管空间总剂量效应研究

3DG111F等4种双极晶体管在航天器驱动电子设备中有着重要的应用。研究和掌握空间辐射环境对这些器件产生的总剂量效应有助于了解单机总剂量效应。文章对3DG111F等4种双极晶体管进行了总剂量辐照试验、测量及试验结果分析。研究结果可为单机总剂量效应的分析提供试验依据。     

金属热防护系统边缘热短路研究

研究了金属热防护系统(TPS)的缝隙辐射及支架两大热短路问题。通过数值计算分析了缝隙宽度和缝隙辐射率对热短路的影响,完成了整体样件以及阵列组合件的稳态传热实验测试,定量地研究了热短路的影响情况。实验结果显示:支架处热短路现象明显,实验中支架引发的热短路温差高达50K;在773K以下,缝隙传热引发的温升随着缝隙宽度的增加而线性增加;在773K以上,辐射热传导在缝隙宽度超过3mm时即成为内部传热的主导机制,这时缝隙传热引发的温升不再随宽度增加而线性递增。所提供的数值分析和实验方法可为金属热防护系统的分析与设计提供重要的参考价值。     

某探测器上火箭发动机热防护仿真与设计

根据某探测器的具体结构及工作条件,分析和计算探测器上火箭发动机的热环境参数.利用有限元法计算火箭发动机固壁辐射热流密度,依据热流边界条件设计热防护方案;利用有效发射率表征多层隔热材料隔热性能并进行温度场数值仿真.由于多层隔热材料性能参数的不易确定性,计算了参数在较大范围内的热防护效果.通过仿真计算验证热防护方案的有效性和可靠性,并分析影响热防护效果的主要因素;计算结果表明多层隔热材料的有效发射率是影响隔热性能最重要的因素,比热容、表面发射率、密度对热防护性能影响很小.