基于广义多层次模糊模型的无人机路径规划

无人机自主飞行的路径规划涉及许多因素,为了使决策向量的获得过程尽可能多包含各个因素的信息,采用广义多层次Fuzzy综合评判是一种有效的方法.但是由于预先不知道权数分配,也无法知道评判结果,故无法用解决广义多层次Fuzzy综合评判或解决其逆问题的方法得到结果.为此引入遗传算法,利用其进化特性,求得合理的权数分配和广义多层次Fuzzy综合评判结果,可以达到控制飞机飞行过程的目的.这一过程提供了一种解决非正非逆问题的广义多层次Fuzzy综合评判问题的新思路和新方法.     

防静电白色热控涂层的耐空间环境及工艺性能

研究了防静电白色热控涂层（ACR-1）的耐空间环境性能及工艺性能。在模拟空间环境设施中研究了紫外辐照、电子辐照和质子辐照对涂层太阳吸收率（αs）的影响。结果表明ACR-1在地球静止轨道环境中具有较高的稳定性；经过3000当量太阳小时（ESH）的紫外光辐照后，△αs为0．02；质子辐照效应对涂层仅。的变化影响较大。另外，研究了涂层厚度对αs和其与基材结合力的影响，以及基材表面处理工艺对涂层在-196—150℃冷热交变循环试验中可靠性的影响。     

基于改进A^*算法的无人机快速轨迹规划方法

针对旋翼无人机在三维障碍物环境中自主飞行时路径搜索速度慢、轨迹生成通常忽略无人机动力学特性的问题,发展一种基于改进A^*算法并同时考虑无人机动力学特性和运动学性能的快速轨迹规划方法。首先,在三维障碍物环境中运用改进A^*算法通过剔除部分网格节点降低A^*算法的节点计算量,提升算法的路径搜索速度;其次,以最小化飞行轨迹的四阶导数作为目标函数,以路径点处的位置、速度、加速度等各阶导数作为约束条件优化飞行轨迹;最后,在三维障碍物环境中对比A^*算法改进前后的路径搜索结果,并对优化的飞行轨迹进行仿真飞行测试。结果表明:改进A^*算法大幅降低了A^*算法的节点计算量,显著提升了路径搜索速度;且无人机能够始终以较小位置误差沿优化轨迹光滑连续飞行。     

仿真与响应曲面法的结合及其在综合生产计划中的应用

 论述响应曲面法与仿真相结合的优化结构,着重讨论了一阶和二阶响应曲面的仿真拟合原理和寻优过程,从而可在仿真环境下给出最优决策参数。利用所开发的GASPRSM仿真优化软件,对飞机工厂生产计划安排进行了仿真运行,证明可以取得显著的经济效果。     

模拟地球同步轨道辐照环境对光学太阳反射镜性能的影响

研究了模拟地球同步轨道辐照环境对卫星用温控涂层-光学太阳反射镜(OSR)性能的影响。对所研制的两类OSR 片进行的辐照试验项目有,真空紫外辐照、低能电子和两种能量的质子辐照。此外还进行了等离子体环境条件下的表面充/放电效应试验。经过相当于安装在地球同步轨道卫星南北极位置处,在空间七年所受到的电子、质子和紫外辐照总剂量的辐照后,导电型OSR 的太阳光谱吸收率α_s 由0.068增加到0.078,法向发射率ε_n 由0.83降低到0.72;而非导电型OSR的α_s 由0.066增加到0.085,ε_n 由0.82降低到0.76。表面充/放电试验的结果表明:导电型OSR 的充电电位仅在15～40V 之间,而非导电型OSR 的充电电位则可高达13kV。因此导电型OSR能有效地控制表面的充/放电现象。     

SPR生物传感器在生命科学及在航天医学中的应用

表面等离子体共振生物传感器在分析生物分子相互作用方面，具有灵敏度高、实时在线、简单快捷和抗干扰能力强等优点，被广泛应用于临床检验、药物筛选等研究领域；因其能满足空间特殊环境下的使用要求，在航天医学领域具有广阔的应用前景．本文综述了表面等离子体共振生物传感器的原理、特点、在生命科学研究中的应用及在航天医学中的应用前景．     

防静电白色热控涂层的空间环境性能试验

通过在氧化锌晶格中掺入重金属离子，得到具有防静电功能的白色颜料，再以丙烯酸树脂为粘合剂制备出空间飞行器外表面用的ACR－1防静电白色热控涂层；研究了空间环境效应（包括紫外辐照，电子和质子辐照）对该热控涂层太阳吸收率的影响并与有机硅白色热控涂层进行了比较，地面模拟空间环境试验研究结果证明，ACR－1防静电白色热控涂层具有良好的空间稳定性。     

MONITORING OF ENERGETIC PARTICLE ENVIRONMENT INSIDE THE CHINA-BRAZIL EARTH RESOURCE SATELLITE

On 14 October 1999, the Chinese-Brazil earth resource satellite (CBERS-1) was launched in China. On board of the satellite there was an instrument designed at Peking University to detect the energetic particle radiation inside the satellite so the radiation fluxes of energetic particles in the cabin can be monitored continuously. Inside a satellite cabin, radiation environment consists of ether penetrated energetic particles or secondary radiation from satellite materials due to the interactions with primary cosmic rays.Purpose of the detectors are twofold, to monitor the particle radiation in the cabin and also to study the space radiation environment The data can be used to study the radiation environment and their effects on the electronics inside the satelhte cabin. On the other hand, the data are useful in study of geo-space energetic particle events such as solar proton events, particle precipitation and variations of the radiation belt since there should be some correlation between the radiation situation inside and outside the satellite.The instrument consists of two semi-conductor detectors for protons and electrons respectively. Each detector has two channels of energy ranges. They are 0.5-2MeV and ≥2MeV for electrons and 5-30MeV and 30-60MeV for protons. Counting rate for all channels are up to 104/(cm2@s)and power consumption is about 2.5 W. There are also the additional functions of CMOS TID (total integrated dose) effect and direct SEU monitoring. The data of CBMC was first sent back on Oct. 17 1999 and it's almost three years from then on. The detector has been working normally and the quality of data is good.The preliminary results of data analysis of CBMC not only reveal the effects of polar particle precipitation and radiation belt on radiation environment inside a satellite, but also show some important features of the geo-space energetic particle radiation.As one of the most important parameters of space weather, the energetic charged particles have great influences on space activities and ground tech nology. CBMC is perhaps the first long-term on-board special equipment to monitor the energetic particle radiation environment inside the satellite and the data it accnmulated are very useful in both satellite designing and space research.     

柱面菲涅耳太阳聚光透镜的光学设计和光学效率

研究了柱面线聚焦菲涅耳太阳聚光透镜的光学设计和光学效率。依据理论分析，对透镜参数进行了优化设计，成功地研制出了柱面线聚焦菲涅耳聚光透镜。还分析了透镜相对孔径（F数）和成型模具等因素对透镜光学效率的影响。     

Noise in wireless systems from solar radio bursts

Solar radio bursts were first discovered as result of their interference in early defensive radar systems during the Second World War (1942). Such bursts can still affect radar systems, as well as new wireless technologies. We have investigated a forty-year record of solar radio burst data (1960–1999) as well as several individual radio events in the 23rd solar cycle. This paper reviews the results of a portion of this research. Statistically, for frequencies f  1 GHz (near current wireless bands), there can be a burst with amplitudes >10³ solar flux units (SFU; 1 SFU = 10⁻²² W/m²) every few days during solar maximum conditions, and such burst levels can produce problems in contemporary wireless systems.