Space telescope and cosmology

The status of institutional arrangements and of the hardware development for Space Telescope are highlighted. After a brief summary of instrument characteristics, some examples are given on the possible use of the ST to study objects of interest to cosmology.     

遥控机器人在空间抓物实验的仿真研究

本文是对空间机器人由地面站遥控操纵在空间抓物实验方案的仿真研究,它是在图形计算机工作站上用C语言编程实现的。视景化仿真描绘了自由飞行物与机器人之间的相对运动,考虑了空间站与地面站信息传输延迟的影响,用扩展的卡尔曼滤波实现了机器人对自由飞行物的自动跟踪,人在地面站观测预报的机器人和目标物的立体图象,可以经操纵球控制机械手运动。仿真结果表明,该方案对进一步研究有很好的参考价值。     

数字仿真支持软件包研究

仿真软件是面向问题,面向用户的专用软件。作为一个比较通用的仿真软件,应具有综合性、高效性、经济性、安全性和集成性等特点。本文针对实时数字仿真的特点,阐述了通用数字计算机的仿真支持软件的设计要求开发与展望。     

多机并联火箭羽流流场及其底部热环境分析

For the problem that the plume flow field structure of a multi engine parallel rocket is complicated and the bottom thermal environment is extremely harsh, which may cause the failure of the engine structural components, the plume flow field and thermal environment at different altitudes are studied through numerical simulation. The result is compared with the measured results in flight which shows that when the rocket is flying at a low altitude, the plume of the engines do not interfere with each other. As the flight altitude increases, the plumes gradually expand and begin to interfere with each other, and finally there is an obvious backflow at the bottom of the rocket. The maximum heat flux at the moment of take off is basically the same as the measured value in flight. Before the backflow occurs, the heat flux mainly consists of radiant heat, the convective heat flow increases as the flight altitude grows, but it is also much smaller than the peak heat flow at takeoff. The result has certain guiding significance for the optimal design of engine structure thermal protection.     

Coronal mass ejection detection using wavelets,curvelets and ridgelets: Applications for space weather monitoring

Coronal mass ejections (CMEs) are large-scale eruptions of plasma and magnetic field that can produce adverse space weather at Earth and other locations in the Heliosphere. Due to the intrinsic multiscale nature of features in coronagraph images, wavelet and multiscale image processing techniques are well suited to enhancing the visibility of CMEs and suppressing noise. However, wavelets are better suited to identifying point-like features, such as noise or background stars, than to enhancing the visibility of the curved form of a typical CME front. Higher order multiscale techniques, such as ridgelets and curvelets, were therefore explored to characterise the morphology (width, curvature) and kinematics (position, velocity, acceleration) of CMEs. Curvelets in particular were found to be well suited to characterising CME properties in a self-consistent manner. Curvelets are thus likely to be of benefit to autonomous monitoring of CME properties for space weather applications.     

五边平行进近冲突风险定量分析模型

针对飞机五边平行进近时飞行冲突,提出了一种五边平行进近飞行冲突定量分析模型。模型通过飞机在任意时刻的标称位置坐标与因不确定性因素导致的航迹偏移量之和,形成飞机任意时刻真实位置坐标,基于此推导出飞机在五边平行进近时冲突风险计算公式。在分析不确定性因素导致航迹偏离时,提出了一种基于布朗运动的随机过程来描述因干扰因素导致飞机随机运动的方法。在建立模型后,使用蒙特卡罗仿真方法计算了飞行冲突概率,结果理想。     

Numerical simulations of water spray on flame deflector during the four-engine rocket launching

This paper aims to study on the cooling effect with two types of water spray nozzle on the flame deflector during the four-engine launch vehicle take-off. To accurately simulate the two-phase flow of the rocket gas with multispecies and the water spray, the three-dimensional compressible Navier-Stokes equations, discrete ordinates methods and realizable k-Ɛ turbulence model are used to establish the rocket supersonic plumes impact model. The Eulerian dispersed phase (EDP) model was used to simulate the water spray into the exhaust gas. The accuracy and effectiveness of the gas-liquid flow model are verified by a good agreement between simulation results and experimental data. On this basis, a series of numerical simulation studies under different water injection position are performed. The results show that the high temperature regions, along the axis of engines on the deflector plate, have no significant temperature decreasing effect by water spray from the nozzles mounted on the apex of the deflector, and the high temperature converts a large quantity of water into vapor near the plume boundary, which would decrease the flow conductivity. With the cooling spray nozzle fixed directly to the deflector plate, the temperature decrease effect is obvious and the effect of thermal shock on deflector plate induced by exhaust plume is reduced, so that it can prevent the flame deflector from thermal ablation. The study results provide indepth information and engineering guidance for designing the water spray systems and increasing the safety of the launch process.     

支线飞机综合飞行仿真平台设计

针对支线飞机机械操纵系统的特点,设计了由模块化的功能单元组成的综合飞行仿真平台,可以实现机械操纵系统数字仿真,在支线飞机的设计与制造中有着重要的应用价值,此平台通过改进还可用于支线飞机的试飞科目训练,从而降低试飞风险并缩短研制周期。     

HTPB官能度数学模型建立

为了研究自由基型液体端羟基聚丁二烯预聚物(HTPB)体系官能度分布情况,对其化学合成中自由电子转移情况进行了分析,并通过数学统计的方法对其官能度分布进行理论数值模拟,建立了适用于自由基型HTPB官能度分布的函数关系式,并与GPC所测结果进行对比。结果显示,计算所得函数关系式与测试数据吻合结果较好,数值模拟结果准确性较高;自由基聚合生产的不同批次的HTPB官能度分布存在较大差异,单官能度分子含量可从5%~24%,二官能度分子的含量可从50%~81%;利用数学统计得到的函数关系,可将复杂的HTPB官能度测试转变为简单的分子量分布测试。     

空间激光通信系统中的信道纠错编码技术

由于空间激光通信系统的信道状态和链路捕获跟踪的不确定性,多种形式的信道纠错编码技术正被广泛发展研究。结合空间激光通信链路中误码性能的主要影响因素,分别选择合适的编码方案进行分析。通过仿真实验可知,对于在大气结构参数为1.5×10~(-14) m~(-2/3)、风速为20 m/s的空地激光链路的环境下,在系统数据速率为2 Gbit/s、要求误码率为10~(-6)时,LDPC码结合交织码相对未编码系统有3 dB的等效编码增益,LT码相对未编码系统有3.8 dB的等效编码增益。提供了一种能快速生成、扩展和校验的编码和交织实现方法,以抵抗大气湍流的快速变化对系统性能产生的影响。