A multiple-rendezvous,sample-return mission to two near-Earth asteroids

We propose a dual-rendezvous mission, targeting near-Earth asteroids, including sample-return. The mission, Asteroid Sampling Mission (ASM), consists of two parts: (i) flyby and remote sensing of a Q-type asteroid, and (ii) sampling of a V-type asteroid. The targeted undifferentiated Q-type are found mainly in the near-Earth space, and to this date have not been the target of a space mission. We have chosen, for our sampling target, an asteroid from the basaltic class (V-type), as asteroids in this class exhibit spectral signatures that resemble those of the well-studied Howardite–Eucrite–Diogenite (HED) meteorite suite. With this mission, we expect to answer specific questions about the links between differentiated meteorites and asteroids, as well as gain further insight into the broader issues of early Solar System (SS) evolution and the formation of terrestrial planets. To achieve the mission, we designed a spacecraft with a dry mass of less than 3 tonnes that uses electric propulsion with a solar-electric power supply of 15 kW at 1 Astronomical Unit (AU). The mission includes a series of remote sensing instruments, envisages landing of the whole spacecraft on the sampling target, and employs an innovative sampling mechanism. Launch is foreseen to occur in 2018, as the designed timetable, and the mission would last about 10 years, bringing back a 150 g subsurface sample within a small re-entry capsule. This paper is a work presented at the 2008 Summer School Alpbach,“Sample return from the Moon, asteroids and comets” organized by the Aeronautics and Space Agency of the Austrian Research Promotion Agency. It is co-sponsored by ESA and the national space authorities of its Member and Co-operating States, with the support of the International Space Science Institute and Austrospace.     

On-orbit verification of fuel-free attitude control system for spinning solar sail utilizing solar radiation pressure

This paper introduces a new attitude control system for a solar sail, which leverages solar radiation pressure. This novel system achieves completely fuel-free and oscillation-free attitude control of a flexible spinning solar sail. This system consists of thin-film-type devices that electrically control their optical parameters such as reflectivity to generate an imbalance in the solar radiation pressure applied to the edge of the sail. By using these devices, minute and continuous control torque can be applied to the sail to realize very stable and fuel-free attitude control of the large and flexible membrane. The control system was implemented as an optional attitude control system for small solar power sail demonstrator named IKAROS (Interplanetary Kite-craft Accelerated by Radiation Of the Sun). In-orbit attitude control experiments were conducted, and the performance of the controller was successfully verified in comparison with the ground-based analytical performance estimation.     

旋转状态气膜换热机理的数值研究

大涡模拟研究了旋转对单孔平板气膜冷却的影响,气膜出流的雷诺数为2600,吹风比为0.5,计算了静止和旋转数为0.02两种状态的流动和换热,从湍流结构演化的角度讨论了旋转状态气膜换热的机理.结果表明:①发卡涡是决定气膜换热的主要湍流结构,旋转状态发卡涡的形状和运动规律主要受哥氏力的影响;②气膜在哥氏力作用下向高半径方向偏...     

一种冷热交变环境下太阳帆应力保持方法

针对冷热交变环境导致太阳帆内部应力剧烈变化的问题,基于形状记忆合金(SMA)弹簧提出了太阳帆的张拉方案和薄膜应力保持恒定的方法,该方法利用形状记忆合金在高低温下的刚度非线性特性,有效补偿薄膜和支撑杆之间的间隙变化,以使薄膜内部应力基本保持恒定。针对六边形构型太阳帆开展了数值仿真,首先建立了太阳帆的热分析模型和力学分析模型,获取了高低温工况下的温度场。然后通过热致变形分析得到薄膜与支撑杆在高低温工况下的间隙变化,据此确定形状记忆合金弹簧的参数。最后对太阳帆在高低温工况下的薄膜内部应力进行了验证。     

Closed bioregenerative life support systems: Applicability to hot deserts

Water scarcity in hot deserts, which cover about one-fifth of the Earth’s land area, along with rapid expansion of hot deserts into arable lands is one of the key global environmental problems. As hot deserts are extreme habitats characterized by the availability of solar energy with a nearly complete absence of organic life and water, space technology achievements in designing closed ecological systems may be applicable to the design of sustainable settlements in the deserts. This review discusses the key space technology findings for closed biogenerative life support systems (CBLSS), which can simultaneously produce food, water, nutrients, fertilizers, process wastes, and revitalize air, that can be applied to hot deserts. Among them are the closed cycle of water and the acceleration of the cycling times of carbon, biogenic compounds, and nutrients by adjusting the levels of light intensity, temperature, carbon dioxide, and air velocity over plant canopies. Enhanced growth of algae and duckweed at higher levels of carbon dioxide and light intensity can be important to provide complete water recycling and augment biomass production. The production of fertilizers and nutrients can be enhanced by applying the subsurface flow wetland technology and hyper-thermophilic aerobic bacteria for treating liquid and solid wastes. The mathematical models, optimization techniques, and non-invasive measuring techniques developed for CBLSS make it possible to monitor and optimize the performance of such closed ecological systems. The results of long-duration experiments performed in BIOS-3, Biosphere 2, Laboratory Biosphere, and other ground-based closed test facilities suggest that closed water cycle can be achieved in hot-desert bioregenerative systems using the pathways of evapotranspiration, condensation, and biological wastewater treatment technologies. We suggest that the state of the art in the CBLSS design along with the possibility of using direct sunlight for photosynthesis and recent advances in photovoltaic engineering can be used as a basis for building sustainable settlements producing food, water, and energy in hot deserts.     

Converging motion of conjugate flaring kernels during two large solar flares

In this paper, we analyze the footpoint motion of two large solar flares using observations made by the Transition Region and Coronal Explorer (TRACE) and Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI). The two flares are the M5.7 flare of March 14, 2002 and the X10 flare of October 29, 2003. They are both classical two-ribbon flares as observed in TRACE 1600 or 171 Å images and have long-duration conjugate hard X-ray (HXR) footpoint emission. We use the ‘center-of-mass’ method to locate the centroids of the UV/EUV flare ribbons. The results are: (1) The conjugate UV/EUV ribbons and HXR footpoints of the two flares show a converging (inward) motion during the impulsive phase. For the two flares, the converging motion lasts about 3 and 10 min, respectively. The usual separation (outward) motion for the flare ribbons and footpoints take place only after the converging motion. (2) During the inward and the outward motion, the conjugate ribbons and footpoints of the two events exhibit a strong unshear motion. In obtaining above results, TRACE UV/EUV and RHESSI HXR data show an overall agreement. The two events demonstrate that the magnetic reconnection for the flares occurs in highly sheared magnetic field. Furthermore, the results support the magnetic model constructed by Ji et al. [Ji, H., Huang, G., Wang, H. Astrophys. J. 660, 893–900, 2007], who proposed that the contracting motion of flaring loops is the signature of the relaxation of sheared magnetic fields.     

惯性量的几何求法及截面特殊点讨论

本文提出计算截面惯性矩、惯性积和几何方法－作惯性圆法，该法具有直观、方便、简洁的优点。讨论了惯性圆退化一点的特点情形，就任意截面特殊点的位置。     

Mechanical behavior of the metal parts welded with extraterrestrial regolith simulant by the solar concentrator in ISRU & ISRF application

The use of in-situ resources plays an important role on future extraterrestrial human activities for the facility repair and habitat construction, especially in sustainable space exploration of Moon and Mars. A method of the metal welded with extraterrestrial regolith simulant using solar processing under ambient conditions is presented. Metal parts are made of Q235B ferroalloy and TA2 titanium alloy into standard tensile members according to the ASTM code. They are disconnected from the middle in advance, and then welded together with lunar and Martian regolith simulant under ambient conditions, respectively. The entire welding process and precautions are detailed. Additionally, the mechanical behavior of weldments is characterized regarding their tensile strength. Furthermore, the fusion zone of weldments is studied by Scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD) measurements. The results show that it is possible to weld metal parts together with extraterrestrial regolith simulant by the solar concentrator. The average ultimate tensile strength of ferroalloy specimens welded with lunar and Martian regolith simulant is 2.94 MPa and 1.66 MPa; The average ultimate tensile strength of titanium alloy specimens welded with lunar and Martian regolith simulant is 4.95 MPa and 2.59 MPa. Moreover, the failure mode of all weldments was brittle failure. The welding joints strength derives from the phases that the regolith as the solder fusing into ferroalloys in a homogeneous way and titanium alloys in an inhomogeneous way. The presented method may provide a new thought for astronaut assistance associating with repairing and fabricating in subsequent Moon and Mars missions.     

PROGRESS IN HELIOSPHERIC PHYSICS

This is an overview of progresses in heliospheric physics made in China in the period of June, 2000 to May, 2002. The report is focused on theoretical studies,modelling and observational analysis of interplanetary physical phenomena, and consists of five sections: the acceleration and heating of the solar wind, corona structures, coronal mass ejections, magnetic reconnection phenomena, and in terplanetary transient phenomena. The main achievements made recently by Chinese scientists in related areas are simply listed in corresponding sections without any priority, only certain editorial consideration.     

一个新的向量等式

给出一个新的向量恒等式，首先采用函数论方法严格证明了该恒等式，其次从向量分析角度指出该恒等式与向量加法的三角形法则之间的密切联系，最后从质量守恒的观点给出该恒等式的一种物理解释。