Polarimetric shapes of spectral lines in solar observations

A century has elapsed since the first observation of the polarimetric profile of a line of the solar spectrum. Since then, dramatic progress has been made in the instrumentation, which is now reaching unprecedented levels of sensitivity in the measurement of polarization signals in solar spectral lines. At the same time, the theoretical framework needed for the interpretation of polarimetric observations has steadily evolved from the pioneering methods, based on simple formulae, to the sophisticated structure that is nowadays used with success in the interpretation of solar observations. The present paper is intended to give a historical perspective of the evolution of this research field and of its major achievements, with particular emphasis on the role played by the magnetic field in determining the polarimetric shapes of spectral lines.     

The ionosphere and the Latin America VLF Network Mexico (LAVNet-Mex) station

In order to detect and study the ionospheric response to solar flares (transient high energy solar radiation), we have constructed a radio receiver station at Mexico City, which is part of the “Latin American Very low frequency Network” (LAVNet-Mex). This station extends to the northern hemisphere the so called “South American VLF Network”.     

Development of in-situ Space Debris Detector

Due to high relative velocities, collisions of spacecraft in orbit with Space Debris (SD) or Micrometeoroids (MM) can lead to payload degradation, anomalies as well as failures in spacecraft operation, or even loss of mission. Flux models and impact risk assessment tools, such as MASTER (Meteoroid and Space Debris Terrestrial Environment Reference) or ORDEM (Orbital Debris Engineering Model), and ESABASE2 or BUMPER II are used to analyse mission risk associated with these hazards. Validation of flux models is based on measured data. Currently, as most of the SD and MM objects are too small (millimeter down to micron sized) for ground-based observations (e.g. radar, optical), the only available data for model validation is based upon retrieved hardware investigations e.g. Long Duration Exposure Facility (LDEF), Hubble Space Telescope (HST), European Retrievable Carrier (EURECA). Since existing data sets are insufficient, further in-situ experimental investigation of the SD and MM populations are required. This paper provides an overview and assessment of existing and planned SD and MM impact detectors. The detection area of the described detectors is too small to adequately provide the missing data sets. Therefore an innovative detection concept is proposed that utilises existing spacecraft components for detection purposes. In general, solar panels of a spacecraft provide a large area that can be utilised for in-situ impact detection. By using this method on several spacecraft in different orbits the detection area can be increased significantly and allow the detection of SD and MM objects with diameters as low as 100 μm. The design of the detector is based on damage equations from HST and EURECA solar panels. An extensive investigation of those panels was performed by ESA and is summarized within this paper. Furthermore, an estimate of the expected sensitivity of the patented detector concept as well as examples for its implementation into large and small spacecraft are presented.     

Asteroid and comet hazard: Identification problem of observed space objects with the parental bodies

This article focuses on the genetic identification of observed small cosmic bodies with alleged parental bodies; namely, comets, asteroids and meteoroid swarms. There is a problem of the upper D-value limit as a measure of proximity between the orbits of the bodies in the five-dimensional phase space (Southworth and Hawkins, 1963). In the study of genetic relationships of the comet and meteor complexes, the D value is usually taken as equal to 0.2 for all meteor showers. However, the upper D limit should be investigated for each meteoroid complex. For example, such investigation was performed for the Taurid meteor complex (Porub?an et al., 2006). In this paper, the upper D-criterion limit value was investigated for the Perseid meteor shower. The 1862 III Swift–Tuttle comet is its parental comet.     

Solar-photon sail hovering orbits about single and binary asteroids

Solar-photon sails can be useful for missions towards and about asteroids. Indeed, for the interplanetary transfer phase, missions to asteroids often require a large variation in inclination and solar-photon sails perform very well for such high energy missions. In the same way, solar-photon sails are also expected to perform well in the phase about the asteroid. This paper studies single and binary asteroids’ hovering regions by using a sailcraft. In order to consider a sailcraft with its own mass and shape, the mutual polyhedral method (usually used to study asteroid dynamics) is used; therefore, the sailcraft is designed by means of tetrahedra. The procedure to obtain the hovering regions about a single asteroid is presented and an accurate analysis of the control variables is carried out. Moreover, control torques required to maintain hovering orbits are obtained by considering the gravitational torques acting on the sailcraft due to the asteroid. In the end, the theory for hovering orbits is extended to binary-asteroid systems and applied to the binary system 1999 KW4.     

Sailing at the brink – The no-limits of near-/now-term-technology solar sails and SEP spacecraft in (multiple) NEO rendezvous

Near-Earth object (NEO) in-situ exploration can provide invaluable information for science, possible future deflection actions and resource utilisation. This is only possible with space missions which approach the asteroid from its vicinity, i.e. rendezvous. This paper explores the use of solar sailing as means of propulsion for NEO rendezvous missions. Given the current state of sail technology, we search for multiple rendezvous missions of up to ten years and characteristic acceleration of up to 0.10 mm/s². Using a tree-search technique and subsequent trajectory optimisation, we find numerous options of up to three NEO encounters in the launch window 2019–2027. In addition, we explore steerable and throttleable low-thrust (e.g. solar-electric) rendezvous to a particular group of NEOs, the Taurid swarm. We show that an acceleration of 0.23 mm/s² would suffice for a rendezvous in approximately 2000 days, while shorter transfers are available as the acceleration increases. Finally, we show low-thrust options (0.3 mm/s²) to the fictitious asteroid 2019 PDC, as part of an asteroid deflection exercise.     

Solar sail optimal control with solar irradiance fluctuations

The optimization of a solar sail-based orbital transfer amounts to searching for the control law that minimizes the flight time. In this context, the optimal trajectory is usually determined assuming constant solar properties. However, the total solar irradiance undergoes both long-term (solar cycles) and short-term variations, and recent analyses have shown that this may have an impact on solar sailing for missions requiring an accurate thrust modulation. In this regard, the paper discusses a strategy to overcome such an issue by suitably adjusting the thrust vector in order to track a reference, optimal, transfer trajectory. In particular, the sail propulsive acceleration magnitude is modified by means of a set of electrochromic material panels, which change their optical properties on application of a suitable electric voltage. The proposed control law is validated with a set of numerical simulations that involve a classical Earth-Mars, orbit-to-orbit, heliocentric transfer.     

Short-term periodicities in the downward longwave radiation and their associations with cosmic ray and solar interplanetary data

In this study downward longwave (LW) atmospheric radiation data for the period of 2014–2020 were used to search for short-term periodicities using fast Fourier transform (FFT). Several local peaks in the power spectrum density were found and established. The time series exhibits a series of significant peaks (exceeding the 95% confidence limit), such as at 273 days, 227 days, 200 days, 178 days, 157 days, 110 days, 120 days, 87 days, 73 days, 53–56 days, 35–30 days, 25–27 days, 21 days, 13 days, and 9–10 days.Moreover, cosmic ray data from KACST muon detector and the Oulu neutron monitor, as well as the data for the solar radio flux at 10.7 cm (F10.7 cm), Dst index, and solar wind speed for the same period as the LW data, were used to look for common cyclic variations and periodicities matching those found in the LW radiation. This was done to investigate the possible effect of the solar activity parameters on LW radiation. Several common periodicities were observed in the spectra of all the variables considered, such as 227 days, 154–157 days, 25–27 days, and 21 days. Some of the periodicities found in the LW radiation spectrum can be attributed to the modulation of the cosmic ray intensity by solar activity. Others are attributed to the disturbances in the interplanetary magnetic field. Based on the spectral results, we suggest that the solar signals may directly or indirectly affect the variations of the downward longwave radiation, which in turn may affect climate change.     

Influence of curved thin-film device on deformation of a solar sail

A spinning solar sail IKAROS’s membrane is estimated to unexpectedly deform into an inverted pyramid shape due to thin-film devices with curvature, such as thin-film solar cells and steering devices on the membrane. It is important to investigate the deformation caused by the curved thin-film devices and predict the sail shape because the out-of-plane deformation greatly affects solar radiation pressure (SRP) and SRP torque. The purpose of this paper is to clarify the relationship between the global shape and orientation and position of curved thin-film devices and to evaluate SRP torque on the global shape using finite element analysis. The global shape is evaluated based on the out-of-plane displacement and the SRP torque. When the curved thin-film devices make the membrane shrink in the circumferential, diagonal, and radial direction, the sail deforms into a pyramid shape, an inverted pyramid one, and a saddle one, respectively. The saddle shape is more desirable for solar sails than the inverted pyramid shape and the pyramid one from the viewpoint of shape stability to SRP and control of SRP torque in the normal direction of the sail (windmill torque). The position of the thin-film device tends to increase the absolute value of windmill torque when it is biased circumferentially from the petal central axis. The suggested design principles for the arrangement of thin-film devices is that the curved thin-film devices should be directed so that the sail shrinks in the radial direction in order to deform the sail into a saddle shape with high shape stability, and the position of the thin-film devices should be biased in the circumferential direction paying attention to the absolute value of windmill torque to determine the direction of windmill torque.     

End-to-end trajectory design for a solar-sail-only pole-sitter at Venus,Earth, and Mars

The concept of a pole-sitter has been under investigation for many years, showing the capability of a low-thrust propulsion system to maintain a spacecraft at a static position along a planet’s polar axis. From such a position, the spacecraft has a view of the planet’s polar regions equivalent to that of the low- and mid-latitudes from geostationary orbit. Previous work has hinted at the existence of pole-sitters that would only require a solar sail to provide the necessary propulsive thrust if a slight deviation from a position exactly along the polar axis is allowed, without compromising on the continuous view of the planet’s polar region (a so-called quasi-pole-sitter). This paper conducts a further in-depth analysis of these high-potential solar-sail-only quasi-pole-sitters and presents a full end-to-end trajectory design: from launch and transfer to orbit design and orbit control. The results are the next steppingstone towards strengthening the feasibility and utility of these orbits for continuous planetary polar observation.