Folding patterns of planar gossamer space structures consisting of membranes and booms

The combination of large membranes and light-weight deployable booms, often called a gossamer structure, has enabled innovative space missions, such as solar sailing, to become possible. Though many designs have been proposed and demonstrated, two problems remain regarding the folding patterns of the membranes. The first problem involves considering the thickness of a membrane to enable uniform and compact folding. The other involves membrane-folding patterns that allow for connecting the membrane to the booms at multiple points and deploying them together while minimizing the use of complex mechanisms. This study proposes three methods that consider the thickness, and two of them can keep the crease lines straight, in contrast to the conventional non-straight crease line solutions. In addition, this study derives one effective design to integrate a membrane with diagonal booms through the systematic classification of existing membrane folding patterns.     

磁场强度对日冕定态结构的影响

以二维ＭＨＤ模型及时变方法为基础,内外边界完整的设影特征线边界条件,考察了太阳日冕大气的定态结构随偶极场强度的变化情况。模拟结果表明：随着偶极场强度的增加,磁场对太阳风的约束增强,低纬闭磁场打开程度减少,高纬与低纬区速度差增加,并且在阿尔文马赫数为１的点附近达到最大,速度过度区变陡;随着日心距离增加,低纬区宽度减小,速度过渡区变陡,可定性解释Ｕｌｙｓｓｅｓ飞船的新观测事实。     

太阳活动变化分析

利用Morlet小波变换方法对太阳黑子相对数进行了分析,对太阳活动变化得出了一些有意义的结果.太阳活动存在10.7 a和101 a的变化周期,以10.7 a周期最为显著.太阳活动强弱变化存在一定的阶段性,在1950年发生了气候突变,之后太阳活动明显加强,未来一段时间太阳活动较弱.      

利用BP神经网络预测AE指数

采用的预报模式是一种全连接的BP网络模型,利用太阳风及行星际磁场的观测数据预报AE指数.神经网络输入选用ACE卫星数据,取5 min平均值,通过比较,选用4个预报参量.构造了预报参量时续为20 min,40 min和60 min依次递增的三个网络,分别进行训练和预测,并对行星际参量对AE指数影响的时续性进行了探讨.预报结果表明,全连接BP神经网络在AE指数的短期预报中是比较有效的,同时还提出了需要进一步改进的环节.      

聚酰亚胺薄膜与碳网格共固化基板成型工艺研究

为满足未来深空探测对航天器太阳翼基板更高的耐温性需求,提出一种新型的太阳翼基板成型工艺方法：聚酰亚胺薄膜与碳网格面板共固化成型。重点研究了聚酰亚胺薄膜与网格面板的剥离性能、网格面板的拉伸性能、蜂窝夹层结构的弯曲性能、共固化基板的耐温性能,并与J-133胶粘贴聚酰亚胺薄膜的传统工艺进行对比。结果表明,共固化工艺的聚酰亚胺薄膜剥离强度约为传统工艺的2倍,且在140℃下的各项力学性能保持率均大于87%,具有很好的耐温性;共固化基板在经历-100~140℃热真空试验后,外观质量及各项性能均合格,满足太阳翼基板耐140℃及以下空间环境的使用需求。     

PROBA-3 mission and the Shadow Position Sensors: Metrology measurement concept and budget

PROBA-3 is a space mission of the European Space Agency that will test, and validate metrology and control systems for autonomous formation flying of two independent satellites. PROBA-3 will operate in a High Elliptic Orbit and when approaching the apogee at 6·10⁴ Km, the two spacecraft will align to realize a giant externally occulted coronagraph named ASPIICS, with the telescope on one satellite and the external occulter on the other one, at inter-satellite distance of 144.3 m. The formation will be maintained over 6 hrs across the apogee transit and during this time different validation operations will be performed to confirm the effectiveness of the formation flying metrology concept, the metrology control systems and algorithms, and the spacecraft manoeuvring. The observation of the Sun’s Corona in the field of view [1.08;3.0]R_Sun will represent the scientific tool to confirm the formation flying alignment. In this paper, we review the mission concept and we describe the Shadow Position Sensors (SPS), one of the metrological systems designed to provide high accuracy (sub-millimetre level) absolute and relative alignment measurement of the formation flying. The metrology algorithm developed to convert the SPS measurements in lateral and longitudinal movement estimation is also described and the measurement budget summarized.     

Spacecraft formation and orbit control using differential attitude-dependent solar radiation pressure

This paper introduces a linear model for spacecraft formation dynamics subject to attitude-dependent solar radiation pressure (SRP) disturbance, with the SRP model accounting for both absorption and specular/diffuse reflection. Spacecraft attitude is represented in modified Rodriguez parameters (MRPs), which also parameterize the orientation of individual facets for a spacecraft with fixed geometry. Compared to earlier work, this model incorporates analytic approximation of the SRP-perturbed chief orbit behavior in a manner enabling its use in applications with infrequent guidance updates. Control examples are shown for single-plate representations of hypothetical spacecraft with generally realistic optical parameters. The results demonstrate the validity of the model and the feasibility of SRP-based formation and rendezvous control in orbits around small bodies and in high orbits around the Earth such as the GEO belt.     

Paths not taken – The Gossamer roadmap’s other options

Highly efficient low-thrust propulsion is increasingly applied beyond commercial use, also in mainstream and flagship science missions, in combination with gravity assist propulsion. Another recent development is the growth of small spacecraft solutions, not in size but in numbers and individual capabilities.Just over ten years ago, the DLR-ESTEC Gossamer Roadmap to Solar Sailing was set up to guide technology developments towards a propellant-less and highly efficient class of spacecraft for solar system exploration and applications missions: small spacecraft solar sails designed for carefree handling and equipped with carried application modules.Soon, in three dedicated Gossamer Roadmap Science Working Groups it initiated studies of missions uniquely feasible with solar sails such as Displaced L₁ (DL1) space weather advance warning and monitoring, Solar Polar Orbiter (SPO) delivery to very high inclination heliocentric orbit, and multiple Near-Earth Asteroid (NEA) rendezvous (MNR). Together, they demonstrate the capability of near-term solar sails to achieve at least in the inner solar system almost any kind of heliocentric orbit within 10 years, from the Earth-co-orbital to the extremely inclined, eccentric and even retrograde. Noted as part of the MNR study, sail-propelled head-on retrograde kinetic impactors (RKI) go to this extreme to achieve the highest possible specific kinetic energy for the deflection of hazardous asteroids.At DLR, the experience gained in the development of deployable membrane structures leading up to the successful ground deployment test of a (20 m)², i.e., 20 m by 20 m square solar sail at DLR Cologne in 1999 was revitalized and directed towards a 3-step small spacecraft development line from as-soon-as-possible sail deployment demonstration (Gossamer-1) via in-flight evaluation of sail attitude control actuators (Gossamer-2) to an envisaged proving-the-principle flight in the Earth-Moon system (Gossamer-3). First, it turned the concept of solar sail deployment on its head by introducing four separable Boom Sail Deployment Units (BSDU) to be discarded after deployment, enabling lightweight 3-axis stabilized sailcraft. By 2015, this effort culminated in the ground-qualified technology of the DLR Gossamer-1 deployment demonstrator Engineering Qualification Model (EQM). For mission types using separable payloads, such as SPO, MNR and RKI, design concepts can be derived from the BSDU characteristic of DLR Gossamer solar sail technology which share elements with the separation systems of asteroid nanolanders like MASCOT. These nano-spacecraft are an ideal match for solar sails in micro-spacecraft format whose launch configurations are compatible with ESPA and ASAP secondary payload platforms.Like any roadmap, this one contained much more than the planned route from departure to destination and the much shorter distance actually travelled. It is full of lanes, narrow and wide, detours and shortcuts, options and decision branches. Some became the path taken on which we previously reported. More were explored along the originally planned path or as new sidings in search of better options when circumstance changed and the project had to take another turn. But none were dead ends, they just faced the inevitable changes when roadmaps face realities and they were no longer part of the road ahead. To us, they were valuable lessons learned or options up our sleeves. But for future sailors they may be on their road ahead.     

Fuzzy energy-based dual contours model for automated coronal hole detection in SDO/AIA solar disk images

The presence of coronal holes in solar disk plays an important role in influencing the space weather and generation of the solar wind. As such there lies a requirement in proper study and prediction of coronal holes occurs in the solar disk. This, in turn, arises the necessity of detection of coronal holes present in the solar disk. In this work, a Hough transformed inspired fuzzy-energy simulated dual contours-based segmentation technique has been proposed for the detection and extraction of holes in solar disk. In the proposed method Hough transform has been induced to initialize the contour for the contour-based method of segmentation. In the algorithm, two contours (active and static) have been initiated and made to evolve based on the energy function by incorporating the gray-scale intensity. Here in the work one contour is made to deform its shape while the other contour is kept static for the coronal holes detection purpose. The experiment has been carried out on few benchmark datasets and the corresponding outcomes have been compared with the results of other existing algorithms. The comparison results highlight the performance of the proposed technique in detection of coronal holes in solar disk.     

Correlation between sunspots and interplanetary shocks measured by ACE during 1998–2014 and some estimations for the 22nd solar cycle and the years between 2015 and 2018 with artificial neural network using the Cavus 2013 model

The Advanced Composition Explorer (ACE) spacecraft has measured 235 solar-based interplanetary (IP) shock waves between the years of 1998–2014. These were composed of 203 fast forward (FF), 6 slow forward (SF), 21 fast reverse (FR) and 5 slow reverse (SR) type shocks. These data can be obtained from the Interplanetary Shock Database of Harvard-Smithsonian Centre for Astrophysics. The Solar Section of American Association of Variable Star Observers (AAVSO) is an organization that counts the number of the sunspots. The effects of interplanetary shock waves on some physical parameters can be computed using a hydrodynamical model. There should be some correlations between these effects and the sunspot variations. The major objective of this paper is twofold. The first one is to search these correlations with sunspots given in the database of AAVSO. As expected, high correlations between physical parameters and sunspots have been obtained and these are presented in tables below. The second objective is to make an estimation of these parameters for the 22nd solar cycle and the years between 2015 and 2018 using an artificial neural network. Predictions have been made for these years where no shock data is present using artificial intelligence. The correlations were observed to increase further when these prediction results were included.