异常SSC事件的行星际原因分析

磁暴急始(SSC)是强烈太阳风动压或行星际激波与磁层相互作用的结果.通常SSC事件的上升时间在4～10 min,我们把上升时间超过15 min的SSC事件称为异常SSC事件.本文利用地磁SYM-H指数鉴别出了5个有地磁观测历史以来发生的上升时间大于15 min的异常SSC事件,并利用Wind,ACE,IMP 8,Goes,Geotail多点卫星太阳风观测数据和地磁观测数据,分析了异常SSC事件的行星际原因.结果表明,异常SSC事件通常都是强烈行星际扰动引起的,5个异常SSC事件有4个对应于行星际激波,有3个对应于多步太阳风动压跃变,有1个对应于行星际电场大幅度变化;由行星际激波产生的异常SSC事件,其上升时间依赖于行星际激波的方向,方向相对于日地连线越偏,上升时间越长;异常SSC事件上升时间与行星际磁场方向关系不明显.      

星载多光谱遥感器太阳定标技术的进展

星载多光谱遥感器的太阳定标器一般选择太阳作为基准光源 ,通过它将太阳辐射引入星载遥感器并调节到星载遥感器的动态范围内 ,对星载遥感器进行绝对辐射定标 ,也可对星载遥感器性能变化进行监测和校正。文章介绍一些最具代表性的星载多光谱遥感器的太阳定标器 ,并进行了分析 ,以反映太阳定标技术的现状与发展。目前采用太阳漫射器的星上定标方法可以实现全视场、全孔径、端点到端点的定标。这一方法的严重缺点是漫射器反射比随时间变化。为了解决这一问题 ,设计一种比辐射计或反射比标定装置来监测漫射器的辐亮度、反射比以及太阳常数。因此这种定标方法是很有前途的 ,在现代一些先进的星载多光谱遥感器上获得应用。通过对此方法的分析 ,提出了在太阳漫射器研制中的一些关键技术。     

碳/环氧复合材料电池壁板的研制

航天器用电池壁板是由碳 /环氧复合材料制成的。文章介绍了其结构特征及研制过程中的技术问题 ,同时叙述了模具方面的有关内容     

基于太阳模拟器法的钙钛矿太阳电池测量方法研究

阐述了基于太阳模拟器法的钙钛矿太阳电池测量方法,包括对太阳模拟器性能、光源辐照度、光谱失配、电池温度、有效面积、I-V扫描时间设定等影响因素的规范,解决了钙钛矿太阳电池测量样品面积小、电容效应高、热稳定性差以及缺少光谱响应匹配度较好的标准电池和有效温控手段缺失等测量问题;并对测量结果的不确定度进行了评定,为国产钙钛矿太阳电池的精确测量奠定基础。     

Statistical properties of the IMF clock angle in the solar wind with northward and southward interplanetary magnetic field based on ACE observation from 1998 to 2009: Dependence on the temporal scale of the solar wind

Utilizing ACE satellite observations from 1998 to 2009, we performed the elaborate study on the properties of the clock angle θ_CA (arctan(By/Bz) (?90° to 90°) of the interplanetary magnetic field (IMF) in the solar wind at 1?AU. The solar wind with northward IMF (NW-IMF) and southward IMF (SW-IMF) are analyzed, independently. Statistical analysis shows that the solar wind with SW-IMF and NW-IMF has similar properties in general, including their durations, the IMF Bz and By components, and the IMF θ_CA. Then, the solar wind with NW-IMF (SW-IMF) is classified into five different temporal scales according to the duration of the NW-IMF (SW-IMF), i.e., very-short wind of 10–30?min, short-scale wind of 0.5–1?h, moderate-scale wind of 1–3?h, long-scale wind of 3–5?h, and super-long wind >5?h. Our analysis reveals that the IMF θ_CA has a distinct decrease with increase of the temporal scale of the solar wind. Next, the solar wind is classified into two groups, i.e., the high-speed solar wind (>450?km/s) and the low-speed solar wind (<450?km/s). Our analysis indicates that the IMF θ_CA depends highly on the solar wind speed. Statistically, high-speed solar wind tends to have larger IMF θ_CA than low-speed solar wind. The evolutions of the solar wind and IMF with the solar activity are further studied, revealing no clear solar variation of the IMF θ_CA. Finally, we analyze the monthly variation of the IMF θ_CA. Superposed epoch result strongly suggests the seasonal variation of the IMF θ_CA.     

Solar Activity and the Climate of Prebaikalia

This paper presents convincing evidence for the reality of manifestations of solar variability in climate characteristics of the Prebaikalia. A numerical estimate is obtained of this influence on ground air temperature. It is shown that the main meaningful variations in air temperature in the region for the period1881-1960 were caused by solar activity. Since the 1960s till the present, with the influence of solar variability continuing, a clear-cut influence of another factor has been observed, the role of which has been steadily increasing, and in the hst decade it has now exceeded the contribution of solar variability. Research results on the variations in hydrological characteristics of Lake Baikal and the Angara river and their connection with solar activity are presented. It is shown that these characteristics are closely correlated with the duration of solar cycles.      

嵌套闭磁场日冕背景结构对触发CME特征的影响

在子午面内,研究具有嵌套闭磁场结构冕流背景对触发日冕物质抛射(CME)特征的影响.在冕流背景磁场结构内有三个小尺度的闭磁场结构,其中中间小尺度闭磁场结构的磁场方向和冕流整体偶极磁场方向相反.CME触发模型在这个小尺度闭磁场结构下方浮出,它具有同心圆形磁场结构,半径为a=0.1Rs(Rs为太阳半径);CME触发模型前半部分磁场方向和触发位置处小尺度闭磁场结构的磁场方向相反,与冕流整体偶极磁场方向相同.数值模拟结果表明,当CME触发模型中心等离子压力与边界压力之比m≥2时,上浮CME触发模型可以触发CME;当m＜2时,上浮CME触发模型不能触发CME,计算结论的误差小于1%.      

Solar X-ray Monitor (XSM) on-board Chandrayaan-2 orbiter

The remote X-ray fluorescence spectroscopy is a powerful technique to investigate the elemental abundances in the atmosphere-less planetary bodies. The experiment involves measuring spectra of fluorescent X-rays from lunar surface using a low energy X-ray detector onboard an orbiting satellite. Since the flux of fluorescent X-ray lines critically depend on the flux and spectrum of the incident solar X-rays, it is essential to have simultaneous and accurate measurement of X-ray from both Moon and Sun. In the context of Moon, this technique has been employed since early days of space exploration to determine elemental composition of lunar surface. However, so far it has not been possible to exploit it to its full potential due to various reasons. Therefore it is planned to continue the remote X-ray fluorescence spectroscopy experiment on-board Chandrayaan-2 which includes both lunar X-ray observations and solar X-ray observations as two separate payloads. The lunar X-ray observations will be carried out by Chandra Large Area Soft x-ray Spectrometer (CLASS) experiment; whereas the solar X-ray observations will be carried out by a separate payload, Solar X-ray Monitor (XSM). Here we present the overall design of the XSM instrument, the present development status as well as preliminary results of the laboratory model testing. XSM instrument will have two packages namely – XSM sensor package and XSM electronics package. XSM will accurately measure spectrum of Solar X-rays in the energy range of 1–15 keV with energy resolution ∼200 eV @ 5.9 keV. This will be achieved by using state-of-the-art Silicon Drift Detector (SDD), which has a unique capability of maintaining high energy resolution at very high incident count rate expected from Solar X-rays. XSM onboard Chandrayaan-2 will be the first experiment to use such detector for Solar X-ray monitoring.     

星载辐射计扫描镜太阳辐射热-结构建模与仿真

三轴稳定卫星平台搭载的光学有效载荷都存在午夜太阳辐射干扰问题,由此产生的热变形效应对光学系统的成像品质影响显著。采用复杂外热流近似建模技术,以及多软件耦合有限元仿真方法,以FY-4卫星的扫描辐射计为应用背景,研究了昼夜太阳辐射对星载辐射计扫描镜产生的热效应,并对不同热设计条件下的工况进行了对比分析。分析结果显示：扫描镜侧面及背面的热控涂层选取对其热变形有重要影响,但是仅仅通过热设计解决温度波动和热变形的矛盾是不够的,需要通过改进扫描镜的材料和优化光机结构加以改善。