基于数字孪生的设备加工过程监测技术研究

针对典型航空产品装配生产线的生产过程中缺乏有效的人机交互手段,设备实时运行状态可视化监控程度低等问题,提出了一种基于数字孪生的加工设备运行状态监测方法,包括模型构建与优化处理、NC程序解析与加工仿真、软硬件通信与数据传输和实时仿真与数据分析.最后在某航空发动机外涵机匣装配生产线验证了该方案,可以实现NC程序加工仿真分析...     

绝对式恒光源24位光电轴角编码器在光电经纬仪上的应用

为满足某型光电经纬仪的使用要求,设计了某绝对式恒光源 24位光电轴角编码器分系统。该编码器采用 16位绝对式光学码盘,码盘刻划有粗码道、通圈码道、中精码道和精码道。精码道的线对数为 16 384(14位)。方位和高低编码器的处理电路设计在一块电路板上,采用一片 DSP为主机,6个读数头输出 64路码盘光电信号分别经放大整形、A/D转换输入至 DSP。DSP完成数据采集、细分、译码、校正等处理,把轴的转角变换成 24位自然二进制角度代码输出和上传。使用情况表明:该编码器的光机结构布局合理、性能稳定,电路板和元器件少、操作简单、测角精度高,满足某型光电经纬仪对于编码器系统的要求,具有较高的实用价值。     

Research on a complex CME event including Hα, LASCO, radio and MDI observations

We present our research on a fast and decelerating partial halo coronal mass ejection (CME) event detected in multi-wavelengths in the chromosphere and the corona on 14 October, 1999. The event involved a whole complex active area which spanned more than 40° of heliolongitude. It included a strong solar flare (XI/1N) and a complex eruptive filament within an active region of the entire complex. Especially, several radio sources were detected in the decimetric range prior to the CME by the Nançay Radioheliograph (NRH). A linear force-free field extrapolation of the Michelson Doppler Imager (MDI) magnetogram was performed to calculate the magnetic topology of the complex prior to the triggering of the event. The presence of a coronal null point combined with the occurrence of two distant and nearly simultaneous radio sources put strong arguments in favor of the generalized breakout model for the triggering of the eruption. The analysis of the subsequent development of the event suggests that large interconnecting loops were ejected together with the CME.     

刀具编码的激光自适应标刻技术

针对激光标刻刀具编码时出现的标刻效率低、标刻质量不稳定、危害工人身体等问题,提出了一种自适应标刻技术.设计了特定结构的输送机和V型块,配合光电开关的检测功能实现自适应传送刀具;设计了使不同刀具在抓取后轴线处在同一位置的机械手爪,以保证不同刀具端面都能快速定位到激光头标刻区域;利用机械手的快速移动,采用了光电开关辅助对焦来提升对焦的速度和精度.在这3项关键技术支持下,完成了整个方案的设计.样机的测试结果表明,相比传统标刻方式,自适应标刻技术能将标刻效率提升4倍以上,保证标刻编码质量稳定可靠,实现无人化标刻.      

多GNSS全球电离层建模特性及其精度检验

分别以GPS单系统和融合BDS,GPS,GLONASS三系统两种方案,采用载波相位平滑伪距观测值和球谐函数,构建了全球电离层延迟模型并进行了对比和分析.本文以GPS单系统和融合三系统两种方法反演了2014年1月每日电离层变化过程,解算得出了频间偏差的月综合产品,并对结果进行了对比和分析.事实上,三系统融合不仅增加了可观测的卫星数,而且改善了穿刺点的几何分布.分析结果表明,三系统融合反演全球电离层在精度上优于GPS单系统,均有5~10 TECU的提高.计算得到的频间偏差结果显示,GPS优于GIONASS,BDS稳定性则较次之.     

基于加权鉴别函数的二进制偏移载波信号跟踪方法

在移除二进制偏移载波（Binary Offset Carrier,BOC）信号跟踪模糊的同时,为了保持BOC信号高的码跟踪精度,提出基于加权鉴别函数（Weighted Discriminator Function,WDF）的BOC信号无模糊跟踪方法。WDF使用非相干超前减滞后功率（Noncoherent Early Minus Late Power,NELP）鉴别器和子载波相位消除（Sub Carrier Phase Cancellation technique,SCPC）鉴别器,生成无误锁点的鉴别函数实现BOC信号跟踪。针对BOC(10,5)信号,仿真结果表明,相比于SCPC、基于伪相关函数的无模糊延迟锁定环（Pseudo correlation function based Unambiguous Delay Lock Loop,PUDLL）方法和对称脉冲模糊移除（Symmetrical Pulse Ambiguity Removing,SPAR）方法,所提WDF方法在码跟踪误差方面分别改善了2.5dB、5.5dB与8.3dB,多径误差分别降为60.4%、32.8%与38.0%。因此,WDF是一种有效的、高性能的BOC信号无模糊跟踪方法。     

空间通信与BATS码：天成之合

创新通信技术在国家重大空间技术开发计划中有着巨大的需求。本文综述了基于网络编码的空间通信技术,旨在探索未来基于网络编码的空间通信技术的可行性和潜力。首先讨论了空间通信的特点,并给出了不同编码方法的概述;详细介绍了基于网络编码的批量稀疏编码（BATS码）创新技术。BATS码作为一种潜在的应用技术可以很好地解决多跳中继网络中严重丢包问题;给出一个BATS码原型设计和实现,实验结果证明BATS码比现有技术具有明显优势;最后,讨论了BATS码在空间通信中的应用前景。     

关于N=31～64位最佳PCM群同步码的研究

本文是关于N=31至64位最佳PCM群同步码研究成果的总结报告。这些最佳码是世界上迄今为止(在该范畴内)的最新成果。文中给出了N=31～64位最佳群同步码的码组图样、误同步概率和主要特征参数。此外,还阐述了歧码问题和某些关键理论。     

用加权几何精度因子选星的GPS抗多径定位方法

在ＧＰＳ（Ｇｌｏｂａｌ ｐｏｓｉｔｉｏｎｉｎｇ ｓｙｓｔｅｍ）中普遍用几何精度因子（Ｇｅｏｍｅｔｒｉｃ ｄｉｌｕｔｉｏｎ ｏｆ ｐｒｅｃｉｓｉｏｎ,ＧＤＯＰ）来选星,但对近距差分ＧＰＳ,多径干扰已变成了主要误差源,传统的ＧＤＯＰ值选星不是最佳的。为减小多径误差,文中提出了一种新的加权ＧＤＯＰ值选星方法。在仿真验证过程中,分析了多径的几何传播机理,并考虑了抗多径天线的抑制效应。仿真结果表明,用加权Ｇ     

Eliminating negative VTEC in global ionosphere maps using inequality-constrained least squares

Currently, ground-based Global Navigation Satellite System (GNSS) stations of the International GNSS Service (IGS) are distributed unevenly around the world. Most of them are located on the mainland, while only a small part of them are scattered on some islands in the oceans. As a consequence, many unreasonable zero values (in fact negative values) appear in Vertical Total Electron Content (VTEC) of European Space Agency (ESA) and Center for Orbit Determination in Europe (CODE) IONEX products, especially in 2008 and 2009 when the solar activities were rather quiet. To improve this situation, we directly implement non-negative physical constraints of ionosphere for global ionosphere maps (GIM) with spherical harmonic functions. Mathematically, we propose an inequality-constrained least squares method by imposing non-negative inequality constraints in the areas where negative VTEC values may occur to reconstruct GIM models. We then apply the new method to process the IGS data in 2008. The results have shown that the new algorithm efficiently eliminates the unwanted behavior of negative VTEC values, which could otherwise often be seen in the current CODE and ESA GIM products in both middle and high latitude areas of the Southern Hemisphere (45°S∼90°S) and the Northern Hemisphere (50°N∼90°N). About 64% of GPS receivers’ DCBs have been significantly improved. Finally, we compare the GIM results between with and without the inequality constraints, which has clearly shown that the GIM result with inequality constraints is significantly better than that without the inequality constraints. The inequality-constrained GIM result is also highly consistent with the final IGS products in terms of root mean squared (RMS) and mean VTEC.