不同流速比超声速混合层气动光学效应研究

针对不同流速比混合层流场气动光学效应问题,首先采用大涡模拟数值方法进行了数值仿真,其次用光线追迹方法进行了气动光学效应仿真,最后对混合层的气动光学效应进行了评价。结果表明,混合层流场涡结构与光程差极小值存在一一对应关系,并且其流速比低的混合层气动光学效应更加严重。同时,研究了不同光学参数对斯特列尔比的影响,得到了相应的规律。     

地月空间星地双向单程测量高精度模型

针对使用星地双向单程测量技术实现给定场景下的地月空间高精度测量问题,建立了地月空间纳秒级星地时差解算模型与米级瞬时距离解算模型,定量分析了模型中各因素的量级,并对模型中收发时延、引力时延、定轨误差和大气延迟等多种因素引入的时差和距离估算误差进行了定量分析。仿真数据的处理结果校验了误差量级理论分析的准确性,时差估算的均方根误差优于7.6ns,瞬时距离估算均方根误差优于2.4 m。建立的模型可以对地月空间星地DOWR测量数据进行高精度处理,实现地月空间高精度时间比对,支持未来中国载人登月等任务及地月空间高精度导航技术。     

氢脉泽谐振腔频率-温度效应分析

进一步改进氢钟的频率稳定度,要求了解影响频率稳定度的各个过程及其影响的相对大小。讨论影响氢钟谐振腔频率的各种热动力学过程。这种分析能够使钟的研制者和用户去识别稳定度的限制因素并因此加以选择以便改进频率稳定度。     

单颗磨粒磨削仿真研究进展

概述了传统磨削仿真的基本方法及发展过程,总结了磨粒模型和工件模型的研究现状,具体分析了有限元法、光滑流体粒子动力学法、分子动力学法以及综合仿真方法等应用于单颗磨粒磨削材料的去除机理、成屑机理、工件表面质量以及磨粒磨损等仿真中的研究现状,最后阐述了各类仿真方法的局限性,并提出了单颗磨粒磨削仿真进一步的发展前景。     

Design and optimization of a novel electrically controlled high pressure fuel injection system for heavy fuel aircraft piston engine

The heavy fuel compression ignition engines are widely equipped as aircraft piston engines. The fuel injection system is one of the key technologies that determines the performance of engine. One of the main challenges is to precisely control the injected fuel quantity and flow rate in the presence of pressure fluctuation. This challenge is even more serious for heavy fuel. An original design for electrically controlled high pressure fuel injection system called Multi-Pumppressure-reservoirs fuel injection System(MPS) was demonstrated to reduce the pressure fluctuation and help keep injection stable. MPS was compared with an ordinary high pressure Common Rail fuel injection System(CRS). This work established one-dimensional AMESim and mathematical models for both CRS and MPS to study the effect of different structures and geometric parameters on the pressure fluctuations. The calculations show that the average fuel pressure fluctuation of MPS can be reduced by 57% for the crankshaft speed of 1900 r/min, and the pressure fluctuation before injection reduced by 100%. It is concluded that the pressure performance of MPS is less sensitive to pressure reservoir volume than that of CRS, and there is an opportunity for further volume reduction.     

基于有向图模型的民机航空电子系统故障诊断

结合民机航电系统外场可更换单元或模块（LRU/LRM）的故障模式及影响分析（FMEA）、故障树 分析和实时性要求,设计了基于时间故障传播图（TFPG）的系统故障诊断元模型和领域模型,研究了基于逻 辑和时间一致性检验的故障诊断算法,使用后向推理和可信度度量列出候选故障集。以飞行管理系统为例,构 造了其功能失效的TFPG 模型,并通过仿真验证了基于TFPG 的诊断在滤除级联效应和关联驾驶舱效应中的有 效性。     

Grinding force and surface quality in creep feed profile grinding of turbine blade root of nickel-based superalloy with microcrystalline alumina abrasive wheels

Creep feed profile grinding of the fir-tree blade root forms of single crystal nickel-based superalloy was conducted using microcrystalline alumina abrasive wheels in the present study. The grinding force and the surface quality in terms of surface topography, subsurface microstructure, microhardness and residual stress obtained under different grinding conditions were evaluated comparatively. Experimental results indicated that the grinding force was influenced significantly by the competing predominance between the grinding parameters and the cross-sectional root workpiece profile. In addition, the root workpiece surface, including the root peak and valley regions, was produced with the large difference in surface quality due to the nonuniform grinding loads along the root workpiece profile in normal section. Detailed results showed that the surface roughness, subsurface plastic deformation and work hardening level of the root valley region were higher by up to 25%, 20% and 7% in average than those obtained in the root peak region, respectively, in the current investigation. Finally, the superior parameters were recommended in the creep feed profile grinding of the fir-tree blade root forms. This study is helpful to provide industry guidance to optimize the machining process for the high-valued parts with complicated profiles.     

我国通用航空应急管理体系构建

低空空域开放是助力我国通用航空迅速发展的重大战略性举措,同时将对通用航空在作业过程中的应急管理带来挑战。文章给出通用航空突发事件的定义,对引起通用航空突发事件的致灾因素从通用航空器、通用航空作业环境、通用航空服务保障情况做一分析。阐述了通用航空应急管理的定义。最后提出了基于应急管理平台的通用航空应急管理体系。     

柔性机械臂辅助空间站舱段对接阻抗控制

空间机械臂辅助舱段对接过程中存在测量与控制误差,易导致对接机构间存在较大接触力,传统FMA (Force MomentAccommodation)控制方法在测量接触力时无法消除大负载惯性力对测量的影响,且测量仪器的引入会进一步降低空间柔性机械臂的刚度。为此,文章提出了柔性机械臂辅助大负载空间舱段对接的阻抗控制方法,采用拉格朗日法推导了空间机械臂的关节输入力矩方程作为前馈输入,建立了含动力学前馈的空间机械臂阻抗控制程序,并以在商业软件ADAMS中建立的空间柔性机械臂与对接舱段组成的系统动力学模型作为控制对象,对系统进行ADAMS灢Matlab联合仿真。仿真结果表明,按照此控制方法,系统可克服外力干扰使目标解析点按照期望的方式运动;同时,通过测量机械臂关节运动参数即可实现对外力的准确感知,而不需额外添加力传感器,既消除了大负载惯性力对测量的影响,也不会导致柔性机械臂刚度的降低。     

不同重力条件下单气泡池沸腾现象的数值研究

对不同重力条件下常压饱和水中单气泡池沸腾现象的气泡生长过程及传热特性进行了数值模拟. 采用简化的润滑流模型计算生长气泡底部微液膜的贡献, 而其他宏观区域的气液两相介质则用连续界面模型统一处理. 气液界面形状和加热面上接触线的运动分别采用Level Set方法和固定的表观接触角来近似刻画. 计算结果表明, 气泡生长过程中, 当量直径近似与生长时间的1/3～1/2次方成正比, 重力对相关趋势的影响不大, 但强烈影响着气泡脱落直径和生长时间, 其中脱落直径反比于重力的1/3次方, 生长时间反比于重力的4/5次方. 在固定的核化点数密度条件下, 加热面平均热流密度近似与壁面过热度的3/2次方成正比, 该趋势并不随重力的减弱而改变.