Advances and trends in plastic forming technologies for welded tubes

With the implementation of environmental protection, sustainable development and conservation-oriented policies, components and parts of thin-walled welded tubes have gained increasing application in the aircraft and automotive industries because of their advantages: easily achieving forming and manufacturing process at low cost and in a short time. The current research on welded tube plastic forming is mainly concentrated on tube internal high-pressure forming, tube bending forming, and tube spinning forming. The focuses are on the material properties and characterization of welded tubes, finite element modeling for welded tube forming, and inhomogeneous deformation behavior and the mechanism and rules of deformation coordination in welded tube plastic forming. This paper summarizes the research progress in welded tube plastic forming from these aspects. Finally, with a focus on the urgent demand of the aviation, aerospace and automotive industries for high-strength and light-weight tubes, this paper discusses the development trends and challenges in the theory and technology of welded tube plastic forming in the future. Among them,laser tailor-welded technology will find application in the manufacture of high-strength steel tubes.Tube-end forming technology, such as tube flaring and flanging technology, will expand its application in welded tubes. Therefore, future studies will focus on the FE modeling regarding how to consider effects of welding on residual stresses, welding distortions and microstructure, the inhomogeneous deformation and coordination mechanism of the plastic forming process of tailor-welded tubes, and some end-forming processes of welded tubes, and more comprehensive research on the forming mechanism and limit of welded tubes.     

金属弹簧管性能影响因素的仿真分析

为了研究高温密封组件金属弹簧性能,本文通过对波音公司编网状弹簧管结构和Streck心脏支架结构的研究,建立了编织弹簧的几何拓扑构型和数学模型,推导了弹簧直径计算公式。采用AUTODESK3D-MAX构建了编织弹簧的仿真模型,用ANSYS仿真软件分别从编织丝直径、编织密度以及编织方法 3方面探究不同测试对弹簧性能的影响。结果表明,增加弹簧丝直径、降低弹簧管轴向方向的编织密度、提高圆周方向的编织密度、向外的弹簧管编织方式可有效提高弹簧管的回弹性能。     

舰载直升机理论风限图飞行模拟获取方法

获取舰载直升机实用风限图,仅依靠实装飞行试验或建模仿真都是非常困难的。通过起降飞行模拟试验获取理论风限图,结合少量的海上实装飞行验证试验是一种综合较优的方法。起降飞行模拟试验需要真实飞行员和高等级飞行模拟器参与,飞行模拟器中的母舰气流场数据、母舰运动可由建模仿真或试验测试得到,且必须考虑母舰气流场的非定场特性;只有当飞行员视景或视觉反馈受限时(如能见度降低时),飞行模拟器基座的六自由度运动才是必需的;用DIPES或Bedford方法量化飞行员主观操纵负担,结合记录的客观操纵数据,评判起降难度;典型的飞行模拟试验程序包含了不同风况下的进近和甲板着舰,通常每隔15°和5kn一个风况。通过起降飞行模拟试验得到的理论风限图,可以更加有效和安全地指导海上实装飞行验证试验,最终获得实用风限图。     

A swept fin-induced flow field with different height mounting gaps

In order to apply the air fin successfully and ensure the maneuverability of hypersonic vehicle, a key problem to be studied urgently is the heat flux brought by the fin mounting gap. The appearance of mounting gap and fin shaft can induce many complex flow structures which need more attentions to be investigated. Under Ma 6, Nano-tracer-based Planar Laser Scattering (NPLS) and Temperature Sensitive Paints (TSP) were applied to visualize and measure transient flow structures and heat flux distribution of a swept fin-induced flow field with different height mounting gaps. Complementarily, Reynolds-averaged N-S equations were solved with k-ω SST turbulent model. The heat flux distribution results of numerical simulation and TSP observed the change of high heat flux region with different mounting gap, both in position and magnitude. The streamlines based on Computational Fluid Dynamics (CFD) and flow visualization results obtained by NPLS revealed the cause of high heat flux region. The high heat flux region in this flow field is mainly related to the reattachment of vortex and flow stagnation. The increase of gap height can lead to stronger gap overflow and shaft-induced horseshoe vortex, which are source of the high heat flux around the fin. The case with the highest mounting gap (4 mm) en-counters the most severe aerodynamic heating, both on the surface of fin and plate. Thus, under the premise of ensuring the flexibility of the fin, the gap should be set as small as possible.     

飞行模拟器中的虚拟声音建模与实时渲染技术

虚拟声音的建模与渲染是飞行模拟器虚拟环境仿真中的关键技术,结合物理、心理、建筑、室内声学以及数字音响艺术等多门学科,提出适用于分布式飞行模拟器虚拟仿真系统的离线综合声音建模与动态均衡渲染算法,经过数字压限器、扩展器以及激励器等环节,将大规模音频数据根据虚拟权重进行离线重构;运用五段等响折线法,并结合心理声学构建了基于大规模音源的动态压缩比算法;结合座舱虚拟环境的等效吸声系数算法和混响时间算法;综合功率谱密度函数与特性共振峰,总结出与一系列状态量对应的幅频特性,应用前馈(BP)网络算法对数字均衡器进行实时调参,实现了发动机推力噪声的动态数字音频实时渲染;并基于Direct Sound的音频特效程序接口开发了一套基于高层体系结构(HLA)的分布式飞行模拟器实时音效系统,仿真结果验证了声音建模与渲染算法的有效性。     

飞机蒙皮铆接过程中阻尼减振降噪方法探讨

针对铆接工作过程中振动和噪声过大影响工作人员身体健康以及装配质量等严峻问题,介绍了阻尼减振降噪技术,探讨了铆接过程中阻尼减振降噪的可行性技术,并简要的介绍了国内外在这一方面的研究成果。最后,认为利用建模仿真模拟来优化阻尼结构的设计和开发以及确定阻尼敷设的最优位置等。并总结出如何设计阻尼器以及设计一款合适的阻尼器所必需具备的几个特性。     

双层壳型涡轮叶片中冲击旋流换热增益效果试验

以双层壳型涡轮叶片内冷通道中旋流换热特性为研究对象,采用热膜法,对双层壳型冷却结构中的狭小受限通道中,旋流作用下换热特性的变化规律开展了细致的试验研究。重点分析了冷却空气的旋流作用对换热的强化增益效果。试验中通过改变冲击Re数(10 000～20 000),冲击间距和冲击孔直径之比H/D(0.35～1.7)等参数,研究了其对旋流的形成及内表面局部换热系数的影响规律。研究发现:由于双层壳型叶片内冷通道的空间受限,冷却空气在通道内形成了旋流结构,该旋流结构显著影响了内表面的局部换热系数并可以有效提高换热效果。研究结果表明:内表面局部换热系数对冲击间距和冲击孔直径之比H/D最为敏感,对于不同冲击Re数,存在一个最佳的H/D使得旋流换热增益效果达到最大(Re=10 000时,最佳H/D为0.95;Re=15 000,20 000,最佳H/D=0.63)。     

脉冲等离子体推力器放电波形设计评估仿真研究

运用磁流体动力学的方法,对脉冲等离子体推力器推力室工作过程开展三维双温MHD数值仿真,并开展对推力室的工作机理的分析研究。通过该模型计算得到的推进剂烧蚀质量和元冲量与实验结果相符,同时针对不同初始电压、电容以及两种特征波形的情况进行评估,为推力器的放电波形设计提供指导依据。结果显示在推力器波形设计的初期,是采用电流高变化率低能量水平,还是采用电流低变化率高能量水平,需要结合实际,进行优化评估。     

基于激波控制的流体推力矢量喷管试验

以二元收扩喷管为对象,开展了基于二次流喷射的流体推力矢量技术研究。基于试验研究,得到了不同喷管落压比、不同的二次流总压比和不同的二次流喷射角度多种工况下的喷管上下壁面中心线压力分布规律以及喷管壁面油流分布图。通过对不同工况下参数变化规律分析,给出了基于二次流喷射的流体推力矢量喷管的主次流气动参数及几何参数对流体推力矢量喷管流场结构和性能影响的关联关系。从试验和分析结果可以看出,喷管落压比、二次流总压比和二次流喷射角度等喷管的主次流气动几何参数对基于流体推力矢量喷管参数变化有明显的影响。     

二维超燃冲压发动机磁控进气道的数值模拟

针对飞行马赫数大于设计马赫数的情况,采用二维磁流体动力学方程对磁控进气道进行了数值模拟研究。数值模拟结果表明磁流体装置的电磁作用可以使非设计马赫数下进气道激波满足SOL(shock on lip)条件,并使出口处的流动变得均匀。分析了磁流体作用位置、宽度和深度等关键控制参数对该类进气道性能的影响,计算结果表明,磁流体作用区域越靠近飞行器前缘,而且在纵向越深,则进气道出口处的流动越均匀,但流率会有所下降;若磁流体作用区域较宽,则需较小的磁场就能使非设计马赫数下进气道的激波结构满足SOL条件。